···
Log in / Register

What is the emission standard for a 2017 car?

4 Answers
VanPatrick
07/30/25 2:33am

17-year-old cars comply with the China 5 standard, which is the fifth stage of the national motor vehicle pollutant emission standards. The China 5 standard imposes stricter limits on nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter emitted by motor vehicles. Methods to identify a China 5 compliant car: 1. Check the vehicle's fuel consumption label; 2. Check the vehicle's conformity certificate or environmental label; 3. Infer based on the time when the China 5 standard was implemented. The full implementation of the China 5 standard will significantly reduce motor vehicle exhaust pollution, achieving the goals of energy conservation, emission reduction, and green environmental protection. The high requirements of the China 5 standard necessitate comprehensive upgrades and modifications to the vehicle's powertrain by automakers to ensure truly clean emissions.

Was this review help?
3
3
Share
LeilaniMarie
08/16/25 8:45am

I specialize in researching automotive emission standards and often assist friends in analyzing such issues. Most vehicles produced in 2017 comply with the China 5 emission standard, as it was fully implemented nationwide that year, covering all new vehicle production. Emission standards significantly impact tailpipe pollutants like carbon monoxide and particulate matter. Compared to the previous China 4 standard, China 5 is more stringent, reducing pollutants by approximately 20%. When examining vehicle identification plates or environmental catalogs, I've observed that both joint-venture brands and domestic vehicles manufactured in 2017 predominantly meet China 5 standards. However, some advanced cities like Beijing, Shanghai, Guangzhou, and Shenzhen might have piloted the China 6 standard earlier. Therefore, if you're purchasing a used car, it's advisable to verify through the vehicle registration certificate or the DMV app. In terms of engine design, China 5-compliant vehicles feature improved catalytic converters, which can also enhance fuel efficiency. During routine maintenance, don't neglect air filter cleaning, as keeping the emission system unobstructed can prolong its service life.

Was this review help?
6
5
Share
Expand All
DiJude
10/21/25 6:56am

I am a car owner who purchased a vehicle in 2017, and I confirmed at the time of purchase that it met the China V emission standard. The salesperson told me that emission standards directly affect license plate registration and traffic restriction policies. For example, China V vehicles can still drive in urban areas, offering much more flexibility than China IV vehicles. Checking the standard is simple: open the hood to check the Vehicle Identification Number (VIN), where the ending digits often correspond to the standard, or look at the environmental protection information section on the first page of the vehicle registration certificate. I also recommend downloading the Traffic Management 12123 app to verify and avoid being misled. China V vehicles generally have stable fuel consumption, making them suitable for family commuting, but don’t forget to undergo regular annual exhaust emission tests to ensure compliance. If you live in an area with heavy air pollution, China V might not be ideal—consider upgrading to China VI for more peace of mind and better environmental friendliness.

Was this review help?
7
2
Share
Expand All
MacLandon
12/04/25 7:24am

As an environmentally-conscious driving enthusiast, I often remind people that most cars produced in 2017 meet the China V emission standard. The China V standard shows improvement in controlling particulate matter and nitrogen oxides, making it cleaner than China IV. During community events, I share that you can identify this by checking the vehicle's environmental label or manufacturer brochures. In daily driving, China V compliance means the emission system requires careful maintenance to prevent clogging that could affect performance. It's also wise to stay informed about local traffic restriction policies, as China V vehicles currently enjoy policy protection and remain relatively practical to use.

Was this review help?
8
1
Share
Expand All
More Forum Discussions

How Long Will the Engine Stay On Without the Key in the Car?

If the car key is taken out of the car, the engine will not shut off automatically. The car will only display a warning indicating that the key is not detected. For vehicles with push-button start, the key only transmits a signal to the ECU during the starting process. Once the engine is running, the fuel pump supplies fuel, and the engine will continue to operate as long as it is not manually turned off. However, leaving the engine running for an extended period, such as an entire day, can cause significant harm to the vehicle. The main risks include the following two scenarios: First, the engine remains in a low-speed operating condition, which makes the pistons and valves more prone to carbon buildup. This can lead to unstable idling and other adverse effects on engine performance, and may even shorten the engine's lifespan. Second, most vehicles are equipped with a three-way catalytic converter in the exhaust system, which is the most important external purification device for vehicle emissions. It converts harmful gases like CO from exhaust emissions into harmless substances such as carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Prolonged idling with the air conditioning on makes it difficult for the catalytic converter to reach its optimal operating temperature, reducing its ability to process exhaust gases and negatively impacting its longevity.
17
0
Share

What is the original tire model of the Beijing BJ40?

The tire model of the Beijing BJ40 is 265/65R17. The first number, 265, indicates that the tire width is 265mm. The number 65 represents the aspect ratio of the tire's cross-section at 65%, meaning the section height is 65% of the width. The letter R stands for radial tire, and 17 indicates the rim diameter is 17 inches. The Beijing BJ40 has a top speed of 160km/h, accelerates from 0-100km/h in 4.2 seconds, and has a fuel consumption of 5.6L per 100km. In addition to the model, the tire also displays the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as standard rim 5.00F.
10
2
Share

Can the rear seats of the Beijing BJ40 be folded flat?

The rear seats of the Beijing BJ40 can be folded flat. The Beijing BJ40 is an SUV model featuring multiple right-angle designs. It has a minimum ground clearance of 210mm, an approach angle of 37°, a departure angle of 33°, and comes with a removable roof. Here are some details about the Beijing BJ40: Interior: The vehicle is equipped with a wide-angle reverse radar, electrically foldable exterior rearview mirrors, overhead audio system, interior lighting, and air vents with a beverage cooling function. Powertrain: The powertrain features a 2.3T engine with a maximum horsepower of 231Ps and a peak torque of 345N·m, paired with a 6-speed automatic transmission. The Beijing BJ40 is available in four versions: S, P, C, and SE. The S series includes the BJ40 Rainforest Expedition Edition and the BJ40 Ring-Tar Champion Edition; the P series is the BJ40 Blade Hero Edition; the C series is the BJ40 City Hunter Edition; and the SE series is the BJ40 Tribute 2020 Edition, a two-door short-wheelbase version.
9
5
Share

Does the Beijing BJ40 have seven seats?

Beijing BJ40 does not have seven seats, the official configurations only include four-seat and five-seat versions. Here are some details about the Beijing BJ40: Exterior: It is an SUV model featuring multiple right-angle designs. It has a minimum ground clearance of 210mm, an approach angle of 37°, a departure angle of 33°, and comes with a removable roof. Interior: The vehicle is equipped with a wide-angle reversing radar, electrically foldable exterior rearview mirrors, overhead audio, interior lights, and air vents that also function as beverage coolers. Powertrain: The powertrain is powered by a 2.3T engine, delivering a maximum horsepower of 231Ps and a peak torque of 345N·m, paired with a 6-speed automatic transmission. The Beijing BJ40 is available in four series: S, P, C, and SE. The S series includes the BJ40 Rainforest Expedition Edition and BJ40 Ring of Champions Edition; the P series is the BJ40 Blade Hero Edition; the C series is the BJ40 City Hunter Edition; and the SE series is the BJ40 Tribute 2020 Edition, which is a two-door short-wheelbase version.
10
4
Share

Can a Car Be Exposed to Direct Sunlight?

It is not advisable to expose a car to direct sunlight for prolonged periods. While the car itself may not be damaged by the sun, prolonged exposure can lead to numerous adverse effects, including aging of the car's interior, fading and deterioration of the paint, hardening of the rubber seals, and even the risk of tire blowouts. Developing the habit of protecting your car from the sun not only preserves its appearance but also ensures driving safety. Adverse effects of prolonged sun exposure on a car include: Aging of the interior—high temperatures can cause plastic dashboards and leather seats to release harmful gases like formaldehyde, resulting in an unpleasant odor inside the car; fading and deterioration of the paint—although car paint is highly heat-resistant, intense UV radiation can still cause it to age, with white paint often turning yellow over time; hardening of rubber seals—prolonged exposure can cause rubber seals to harden and lose elasticity, potentially leading to cracks and reduced sealing effectiveness, which affects waterproofing and sound insulation; tire blowouts—tires, being made of rubber, are susceptible to damage when exposed to high temperatures for extended periods, as road surfaces can become much hotter than the surrounding air, leading to cracking, bulging, and a significantly shortened lifespan; increased risk—if items like lighters or perfumes are left inside the car, they may explode when exposed to sunlight, posing a threat to personal safety and property.
15
3
Share

Does the Polo have anti-collision beams?

The new Polo has a front anti-collision beam but no rear anti-collision beam, which is replaced by two foam blocks. Below are the materials of the new Polo's anti-collision beams and the repair methods for the bumper: Materials of the new Polo's anti-collision beams: The front anti-collision beam of the Polo is made of steel sheet material, with a length of 1020mm, covering a wide horizontal range. The design of the beam itself and the crumple zone gives a solid impression. Bumper repair methods: Remove the burrs on the bumper, preferably with a small knife, to make the surface smooth for easier repair. Apply putty to the uneven parts to smooth them out. The area around the bumper damage is usually covered with dirt. To ensure the putty adheres well, clean it thoroughly first. A brush generally works well for this. If the bumper has oil stains, the putty may not adhere properly, so it's best to use paint thinner to repair any areas where the paint has peeled off. Prepare putty in various colors, choosing the closest match possible. Mix the bumper putty by squeezing equal lengths of the main agent and hardener according to the product instructions. Once mixed, apply the putty with a spatula, focusing on embedding it into the damaged area.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.