What is the emission standard for a 2004 car?

1 Answers
ElianaDella
07/25/25 2:44am
2004 cars comply with China II emission standard. Below is relevant information about China II: 1. Application scope: According to the "Announcement on Implementing the National Phase II Vehicle Emission Standards" issued by the Environmental Protection Administration, starting from September 1, 2003, all newly designed heavy-duty vehicles must meet the National Phase II Type Approval Emission Limits equivalent to Euro 2 standards. This marked a new stage in China's motor vehicle emission pollution control. From July 1, 2004, all newly designed light-duty vehicles must comply with China II standards, and the application and approval of light-duty vehicle models meeting China I standards (equivalent to Euro 1 standards) were discontinued. 2. Significance: Compared with the National Phase I Emission Standard (referred to as China I standard), the "China II standard" reduces single-vehicle pollutant emissions by 30.4% for carbon monoxide and 55.8% for hydrocarbons and nitrogen oxides.
Was this review help?
11
2
Share
More Forum Discussions

Difference Between AT and Tiptronic Transmission?

Tiptronic transmission is the most common type of transmission, which allows both manual and automatic gear shifting, with the ability to switch between the two modes freely. AT (Automatic Transmission) is a type of automatic transmission that can automatically shift gears up and down. Below are the specific differences between Tiptronic and AT transmissions: 1. Manual Transmission, also known as MT, is commonly referred to as a stepped transmission. This is because the transmission has fixed gear ratios, such as a first gear ratio of 3.455, second gear of 2.056, up to fifth gear of 0.85. These numbers multiplied by the final drive ratio give the total gear ratio. A manual transmission consists of an output shaft, input shaft, and countershaft. Although Tiptronic can enhance driving pleasure, it does not offer full manual control, and the manual mode is often underutilized. Additionally, using the manual mode can be less fuel-efficient. 2. AT transmission is a type of automatic transmission, commonly found in American cars. The reason AT transmissions can shift gears freely is that they use vehicle speed and load as parameters for control. The biggest advantage of AT transmissions is their ability to directly shift gears based on vehicle speed, with quick shifting and minimal noticeable jerkiness during gear changes. However, AT transmissions have a complex internal structure, leading to higher maintenance and repair costs in the long run.
13
1
Share

What are the differences between the Kodiaq GT and the Kodiaq?

The differences between the Kodiaq GT and the Kodiaq are as follows: 1. Exterior differences: The front faces of the Kodiaq and Kodiaq GT are quite similar, with nearly identical designs. However, the rear sections of the two models differ significantly in style. Viewed from the side, the Kodiaq features square, rugged lines, presenting a traditional SUV silhouette, while the Kodiaq GT adopts a sloping roofline, embodying a typical coupe design. The rear designs are largely similar, but the Kodiaq GT has a more pronounced rear window incline. Additionally, the Kodiaq GT sports round exhaust pipes, whereas the Kodiaq has hidden exhaust pipes. 2. Interior differences: The dashboard designs of both models are quite similar, with the most notable difference being the seats. The Kodiaq comes with conventional seats, while the Kodiaq GT is equipped with integrated sport seats, which offer superior support and envelopment compared to standard seats. 3. Model classification differences: The 'GT' designation inevitably hints at performance. Both the Kodiaq and Kodiaq GT are powered by a 2.0L turbocharged engine, available in both high and low power versions. On paper, both vehicles share identical powertrain configurations. However, the Kodiaq GT features a MacPherson strut front suspension and a multi-link independent rear suspension, tuned for a more sporty feel compared to the Kodiaq, offering better cornering support and more dynamic power delivery.
16
5
Share

Can the tire pressure of the 3rd generation Haval H6 be reset?

The tire pressure of the 3rd generation Haval H6 can be reset. Tire pressure reset is an operation performed on the tire pressure monitoring system after addressing a tire pressure fault, to reset the monitoring system. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the fault light on the dashboard will turn off, indicating the completion of the tire pressure reset. Generally, there are three main reasons for abnormal tire pressure: Abnormal tire pressure: The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In such cases, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed promptly, the monitoring system will continue to record the old data, causing the tire pressure monitoring indicator light to remain on. Performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors the tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also trigger the tire pressure fault light. In case of sensor damage, the only solution is to replace it with a new one.
15
3
Share

How Many Seats Does the Song Pro Have?

Song Pro is a five-seater SUV under BYD's brand. The BYD Song Pro is available in three different powertrain variants: gasoline-powered (Song Pro Fuel), plug-in hybrid (Song Pro-DM), and all-electric (Song Pro-EV). Below are the key features of the Song Pro: 1. It is the first to adopt a golden compartment division + wraparound interior design, with the center console tilted 7° toward the driver's side for the most ergonomic angle. It also introduces the BYD-Heart Smart Core for the first time, integrating essential function buttons around the gear lever for easy access. 2. The Song Pro Fuel has a wheelbase of 2712mm, with body dimensions of 4650mm × 1860mm × 1700mm. The rear seat backrest reclines up to 110°, and the seat cushion length is 510mm, providing excellent leg support. The rear features four air vents located behind the center console and under the front seats for wide airflow coverage. 3. The Song Pro Fuel version is equipped with a 1.5T engine paired with a 6-speed automatic transmission. After recalibration, the maximum power is increased to 118kW, and the maximum torque is boosted to 245N·m, complying with the China VI-B emission standards.
2
4
Share

How to Charge New Energy Sedans at Home?

New energy vehicles can be charged at home by installing a home charging station. If it is not possible to install a home charging station, a portable home charger can be used, which only requires plugging into a standard 220V 16A three-pin socket to charge the electric vehicle, although the charging speed is slower. Here is more information about new energy vehicles: 1. New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources or conventional vehicle fuels with new on-board power devices, integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and new structures. 2. The promotion of new energy vehicles is aimed at addressing environmental protection and petroleum crisis needs, reducing or abandoning the current mainstream models that burn traditional gasoline or diesel to drive internal combustion engines.
6
0
Share

How to Engage Reverse Gear While Driving?

There are various methods to engage reverse gear, and the specific approach depends on the vehicle type. Below are different methods for engaging reverse gear in various vehicles: 1. Some vehicles require pushing straight to the right and then pulling down to engage the gear. 2. In some vehicles, the reverse gear is positioned to the left of the first gear, meaning you need to push one notch further to the left than the first gear and then move forward to engage. 3. Some vehicles require lifting the button beneath the gear lever before pushing left and forward to engage the gear. 4. Other vehicles may require pressing down the gear lever and then pushing left and forward or right and backward to engage the gear. Here are some tips regarding gear shifting: 1. Do not press the accelerator pedal when shifting gears. 2. Avoid immediately pressing the accelerator pedal hard after engaging a gear. 3. The vehicle can only be started in P (Park) or N (Neutral) gear. 4. Removing the gear lever from P gear requires pressing the brake pedal. 5. Do not shift into N gear while driving to coast.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.