What is the emission standard for 2009 vehicles?

1 Answers
PaisleeDella
07/29/25 8:28pm
2009 vehicles comply with either China III or China IV emission standards. Vehicles manufactured between July 2007 and September 2009 generally meet China III standards, while most vehicles produced after September 2009 adhere to China IV standards. Below is an introduction to automotive emission standards: 1. Automotive emission standards regulate the permissible levels of harmful gases emitted from vehicle exhaust, including CO (carbon monoxide), HC+NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot). 2. Methods to check your vehicle's emission standard: (1) Check the label on the back of the vehicle's environmental protection compliance mark to easily identify the emission standard. (2) The vehicle certification document contains a section with detailed emission standard information, though it may not directly state "China III" or "China IV" but rather a series of characters. (3) Estimate the emission standard based on the vehicle's manufacturing year. (4) Take the vehicle registration certificate to the local vehicle management office for inquiry.
Was this review help?
15
5
Share
More Forum Discussions

Where to Bleed Air After a Forklift Runs Out of Fuel?

Bleed air from the bleeder screw on the brake caliper. Below is a related introduction: Loader: A loader is a type of earthmoving machinery widely used in construction projects such as highways, railways, building hydroelectric projects, ports, and mines. It is primarily used for shoveling and loading loose materials like soil, sand, gravel, lime, and coal, and can also perform light digging operations on ores and hard soil. By equipping different auxiliary working devices, it can also perform tasks such as bulldozing, lifting, and handling other materials like timber. Function: In road construction, especially in high-grade highway projects, loaders are used for filling and excavating in foundation engineering, as well as for gathering and loading materials like asphalt mixtures and cement concrete. Additionally, they can perform tasks such as pushing soil, leveling the ground, and towing other machinery. Due to their advantages of fast operation speed, high efficiency, excellent mobility, and ease of operation, loaders have become one of the main types of machinery in earthmoving operations for construction projects.
7
5
Share

What are the reasons for the forklift arm not lifting up?

Here are the reasons why the forklift arm cannot lift up: Internal leakage in the boom cylinder: During the use of the loader, hydraulic oil contamination or deterioration causes wear and aging of the seals inside the cylinder, resulting in ineffective sealing. This leads to internal pressure leakage in the system. Since the boom cylinder is an actuator, when internal leakage occurs, part of the system pressure is diverted back to the tank through the return oil pipe, causing the boom to fail to lift or to lift weakly. Internal leakage in the work pump or spline wear: The work pump pressurizes the system through the centrifugal force generated by the impeller rotating the hydraulic oil. When the gears inside the pump wear or oil leaks, the centrifugal force produced by the pump is insufficient to raise the system pressure to the standard value, resulting in low system pressure. Additionally, when the spline on the work pump shaft is severely worn, the spline slips, reducing the rotational speed, which also leads to insufficient system pressure and the inability to lift the boom. Insufficient hydraulic oil: When the hydraulic oil in the tank is insufficient, a large amount of air is mixed into the oil being delivered to the work pump, causing the pump to run idle. This reduces the system pressure and, in severe cases, can damage the work pump. Therefore, insufficient hydraulic oil can also prevent the boom from lifting.
7
3
Share

Are Three-Wheeled Vehicles Allowed on the Road?

No. Here are the relevant details: Electric three-wheeled vehicles are not allowed on the road: The registration and road use of electric three-wheeled vehicles should comply with the relevant regulations of local governments. Regardless of whether the electric three-wheeled vehicle meets national mandatory standards, it is not allowed on the road. Legal Basis: According to Article 18 of the Road Traffic Safety Law of the People's Republic of China, non-motor vehicles that are required to be registered by law may only be driven on the road after being registered by the traffic management department of the public security authority. The types of non-motor vehicles that are required to be registered by law shall be stipulated by the people's governments of provinces, autonomous regions, and municipalities directly under the central government based on local conditions. The dimensions, weight, brakes, bells, and night-time reflective devices of non-motor vehicles must comply with the safety technical standards for non-motor vehicles.
3
3
Share

Will points be deducted if the front of the car touches the line when exiting a parallel parking space?

Exiting a parallel parking space with the front of the car touching the line will result in a 10-point deduction. Below is an extended explanation: 1. Parallel parking test requirements: The requirements for the parallel parking test in Subject 2 are that the driver must park the vehicle in the right-side parking space without the wheels touching the lane boundary or the parking space boundary. 2. Test scoring criteria are as follows: 1) If the vehicle stops after entering the space and the body crosses the line, 100 points will be deducted. 2) If the wheels touch the lane boundary while driving, 10 points will be deducted. 3) If the vehicle is not parked within the space, 100 points will be deducted. 4) If the left turn signal is not turned on when starting, 10 points will be deducted. 5) If the vehicle stops midway, 100 points will be deducted.
11
4
Share

Is it necessary to replace the brake steel hose?

When you notice a decrease in braking power and an increase in braking distance, it's time to consider replacing the brake steel hose. The brake steel hose consists of a rubber tube wrapped with high-strength steel wires and an outer wear-resistant layer, providing strong resistance to expansion. Here are more details: 1. Replacement considerations: The original rubber hose may slightly expand when braking, weakening the initial braking response. Replacing it with a steel hose can improve this situation. However, after installation, turn the steering to both extreme points to ensure it doesn't scrape or interfere with other components, affecting their normal operation. 2. Principle: Braking primarily relies on the pressure generated by brake fluid compression. Therefore, the brake fluid hose is crucial—it must be elastic and heat-resistant. Considering cost, most manufacturers use rubber hoses, but steel hoses actually perform better.
17
1
Share

How to Avoid High Fuel Consumption When Switching Back from Gas to Gasoline?

To avoid high fuel consumption when switching back from gas to gasoline, cleaning the fuel injectors and replacing the spark plug wires can help. Advantages of converting from gasoline to gas: 1. Higher economic benefits: Natural gas mixes easily and uniformly with air in the engine, burns more completely and cleanly, is less prone to carbon deposits, has good anti-knock properties, and does not dilute lubricating oil. This significantly reduces wear and tear on engine cylinder components, extending the engine's lifespan and the usage period of lubricating oil. 2. Better social benefits: Compared to petroleum fuels, gas fuels have smaller energy losses during preparation, emit fewer harmful pollutants, and are more environmentally friendly. 3. Higher safety: If natural gas leaks slightly, it quickly disperses into the atmosphere. All components of the gas fuel system, especially the sealing parts, undergo strict inspections. Therefore, natural gas is relatively safe as an automotive fuel.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.