What is the emission standard for 2005 vehicles in China?

1 Answers
FernandoDella
07/29/25 1:52pm
2005 vehicle emission standards in China are National II and National III. Relevant information: 1. Meaning of emission standards: Refers to the national standards for motor vehicle pollutant emissions at various stages, implemented to enforce environmental protection strategies. 2. Pollutants: Carbon monoxide (CO), hydrocarbons (HC), nitrogen oxides (NOX), and particulate matter (PM), etc. 3. Causes of generation: The reasons for harmful gas production vary. CO is an intermediate product of incomplete fuel oxidation, which occurs when oxygen is insufficient. Rich fuel mixture and uneven mixture distribution increase CO content in exhaust. HC represents unburned fuel components, caused by uneven mixture distribution or cold combustion chamber walls leading to incomplete combustion. NOX is produced during fuel combustion. PM is generated when fuel burns under oxygen-deficient conditions.
Was this review help?
9
1
Share
More Forum Discussions

What does 2.0at mean?

2.0 indicates that the engine displacement is 2 liters, and AT stands for automatic transmission (as opposed to MT, which stands for manual transmission). Here is some additional information: 1. Identification: If you see a number followed by a "V" identifier, it indicates the total number of valves in the engine. A common "16V" means the engine has 16 valves. A number followed by a "T" indicates that the engine is turbocharged. 2. Meaning of identifiers: GX, GI, etc., are codes assigned by the manufacturer to different configurations of a major car model. These codes have no practical significance, but generally, the more letters or the longer the code, the higher the configuration of the car within that model.
4
5
Share

What formats does the Prado USB support?

The Prado USB supports lossless WAV or MP3 formats. Main functions of the USB port in a car: Utilizing the car's standard power supply, the USB port can be used to charge electrical devices or serve as a fixed power interface for electrical equipment. Precautions for using the USB port: Charging should only be done when the car's engine is running to avoid damage to electrical devices due to unstable power supply. Do not connect too many devices to prevent overloading, which could damage the car battery and alternator. Avoid using the USB port during thunderstorms to prevent lightning strikes. Do not use the USB port in damp environments. Rust or water stains may cause the USB drive to fail to connect properly.
3
5
Share

How many kilometers is 100 yards equal to?

100 yards is 100 kilometers. The term "yard" commonly used by Chinese people refers to one kilometer (KM). For example, driving 100 yards on the highway (omitting per hour), the highway speed limit is 120 yards, driving 120 yards at midnight, with a speed of around 160 yards [5], the dashboard speed has exceeded 150 yards. The "yard" mentioned by Chinese drivers is just a colloquialism, slang, or misnomer, and this unit of measurement does not actually exist. The correct unit and term for speed is kilometers per hour, abbreviated as Km/h in English. The conversion relationship between the imperial unit yard (YARD) and the metric unit is: 1 yard is approximately equal to 0.9144 meters.
12
0
Share

Why does the dash cam battery not hold a charge?

Dash cam batteries do not hold a charge because the built-in battery of a dash cam is very small, with a capacity of only a few hundred milliamps. When vehicle parking detection is activated using the built-in battery, it typically lasts only about 20 hours. Most modern dash cams come equipped with both a built-in battery and an external power supply interface. The built-in battery is usually a lithium battery, while the external power supply is generally provided through the cigarette lighter. It can be connected to the cigarette lighter, ACC, or directly to the car battery. A dash cam is an instrument that records images, sounds, and other relevant information during vehicle operation. After installation, it can record the entire driving process in video and audio, providing evidence in case of traffic accidents.
19
4
Share

What Causes the Windshield Wiper Slow Mode to Stop Working?

There are several reasons why the windshield wiper slow mode may stop working: 1. Blown fuse: When the car's wiper fuse blows, the wiper will definitely not function properly. In this case, a new fuse needs to be replaced. 2. Wiper switch damage: If the wiper switch malfunctions or has poor contact, it will affect the normal operation of the car's wiper. 3. Dead car battery: If the car battery is dead, not only will the wiper not work properly, but the car's lighting system, horn, and multimedia entertainment system will also fail to function. The windshield wiper is a device used to remove raindrops and dust attached to the car's windshield, improving the driver's visibility and enhancing driving safety.
17
0
Share

What to Do If the Car Stalls a Few Seconds After Starting?

Solutions for a car stalling a few seconds after starting include: 1. Use specialized carbon cleaner to remove carbon deposits from the throttle body, spark plugs, cylinders, fuel lines, intake manifold, etc.; 2. Replace the spark plugs. Reasons for a car stalling a few seconds after starting include: 1. Carbon deposits causing stalling: Carbon buildup in the throttle body, spark plugs, etc.; 2. Poor fuel quality and clogged fuel injectors: Using low-quality fuel not only increases carbon deposits but may also clog the fuel injectors; 3. Ignition system failure: Carbon buildup on spark plugs and insufficient ignition voltage; 4. Power supply failure: If the battery is severely depleted, it can make the engine difficult or impossible to start; 5. Abnormal engine control system.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.