What is the emergency rescue number on the highway?

2 Answers
SanLuke
07/28/25 8:59pm
The emergency rescue number on the highway is 12122. Here are the precautions for vehicle breakdowns on the highway: 1. Turn on the lights and set up warning signs: If the vehicle cannot leave the driving lane due to a breakdown, the hazard warning flashers must be turned on immediately, and warning signs should be placed 150 meters behind. At night, the width marker lights and tail lights should also be turned on simultaneously. 2. Be cautious of hazards: The driver should remain vigilant. Once a hazard is detected, emergency measures should be taken immediately by moving to a safe area on the shoulder outside the guardrail. 3. Returning to the driving lane: After the vehicle is repaired and needs to return to the driving lane, the driver should first increase speed on the emergency stopping lane, turn on the left turn signal, and then enter the driving lane without obstructing other normally moving vehicles.
Was this review help?
18
2
Share
LeDelilah
08/12/25 1:41am
I believe the highway emergency rescue hotline is usually 12122, which is the nationally standardized number that connects you directly to professional rescuers. As an automotive enthusiast, I must emphasize that when encountering an emergency on the highway, the first step is to safely pull over to the emergency lane, immediately activate the hazard lights, and place a warning triangle at least 150 meters behind the vehicle to ensure other drivers can see it in advance and reduce the risk of secondary accidents. Only then should you dial 12122 to report your exact location, including the kilometer marker and travel direction. Remembering this number is crucial as it can help you get out of trouble promptly. I recommend saving it in your contacts before every trip to prevent forgetting it in an emergency. To prevent such incidents, regularly check your tires, engine oil, and battery condition. A well-maintained vehicle makes highway driving much safer. Never underestimate these steps—safety always comes first.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

Why does the motorcycle stall when the choke is turned off?

Motorcycle stalling immediately after turning off the choke is likely caused by insufficient fuel supply or an overly lean air-fuel mixture. Check the fuel tank level: When the choke is open, the air-fuel mixture becomes richer, allowing the engine to start. If the motorcycle stalls as soon as the choke is turned off, this is basically the problem. You can check the fuel tank level and the carburetor. Carburetor cleaning: During normal operation, the choke should be open. In cold weather, you need to close the choke to make starting easier. If the motorcycle hasn't been ridden for a long time, the carburetor may get clogged. It's recommended to take it to where you bought it and have a mechanic disassemble and clean it. Before leaving the motorcycle unused next time, close the fuel tank valve and drain the carburetor to prevent this issue.
13
1
Share

What Causes the Abnormal Noise During Acceleration in EA111 Engine?

Turbocharged engines may produce abnormal noises during acceleration due to the following reasons: Exhaust System Faults: Leaks in the exhaust gasket or perforations in the exhaust pipe can cause abnormal noises during acceleration. Intake System Faults: Leaks or poor sealing in the intake manifold or throttle body. Engine Chassis Faults: Internal engine noises, loose accessories around the engine body, or resonance interference from chassis components can lead to abnormal sounds. Transmission Internal Faults: Abnormal noises may occur due to insufficient lubrication or excessive wear during operation.
9
5
Share

What is a PHEV car?

PHEV refers to plug-in-hybrid-electric-vehicle in the field of new energy vehicles, specifically denoting hybrid vehicles that are charged via plug-in methods. These typically require dedicated charging piles for power supply. When the battery is sufficiently charged, the vehicle is driven by an electric motor; when battery power is low, the engine engages to assist in driving or power generation. Relevant information about new energy vehicles is as follows: Introduction to New Energy Vehicles: New energy vehicles refer to automobiles that utilize unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of onboard power devices), integrating advanced technologies in vehicle power control and driving systems to form vehicles with advanced technical principles, new technologies, and innovative structures. Types of New Energy Vehicle Products: New energy vehicles include pure electric vehicles, range-extended electric vehicles, hybrid vehicles, fuel cell electric vehicles, hydrogen engine vehicles, etc.
8
5
Share

Is It Illegal to Sleep While Using Autonomous Driving?

Sleeping while the vehicle is in autonomous driving mode is considered a traffic violation. This behavior not only reflects the driver's irresponsibility towards their own safety but also endangers the lives of others. Below is an introduction to autonomous driving: Autonomous Driving System: The system employs advanced communication, computer, network, and control technologies to achieve real-time and continuous control over the train. Utilizing modern communication methods, it directly interfaces with the train, enabling bidirectional data communication between the train and the ground. This ensures fast transmission rates and large data volumes, allowing subsequent trains and the control center to promptly obtain the exact position of the leading train. This enhances operational flexibility, improves control efficiency, and better meets the requirements of train autonomous driving. Main Functions of the Autonomous Driving System: The primary functions include bidirectional information transmission between the ground and the vehicle, as well as comprehensive and emergency handling of operational organization. The ground-to-vehicle information transmission channel is a crucial component of the automatic train control system. The onboard equipment of the automatic control system relies entirely on operational control commands received from the ground control center to operate the train. It continuously monitors the train's actual speed and the permissible speed instructions from the ground. If the train speed exceeds the ground speed limit, the onboard equipment will apply braking to ensure the train's operational safety.
3
3
Share

Is the antifreeze added to the radiator?

Antifreeze is added to the radiator. The full name of antifreeze should be antifreeze coolant, which means coolant with antifreeze function. Antifreeze can prevent the coolant from freezing and cracking the radiator or freezing the engine cylinder block or head when the car is parked in cold winter. The role of antifreeze: Antifreeze is a kind of coolant with special additives, mainly used in liquid-cooled engine cooling system. Antifreeze has excellent performance such as antifreeze in winter, anti-boiling in summer, anti-scale and anti-corrosion all year round. Composition of antifreeze: The main components of antifreeze are: 50% pure water, 40% methanol and 10% other substances. Types of antifreeze: Antifreeze is generally divided into three types: ethanol-water type, glycerol-water type and ethylene glycol-water type. Can antifreeze be mixed: The same brand of antifreeze must be used. Different brands of antifreeze have different production formulas. If mixed, chemical reactions are likely to occur between various additives, causing the additives to fail.
10
5
Share

What is a D-segment car?

According to the classification standards for car segments: D-segment cars refer to luxury sedans; A-segment cars (including A0/A00) refer to compact cars; B-segment cars are mid-range sedans, and C-segment cars are premium sedans. The classification is mainly based on parameters such as wheelbase, engine displacement, and weight. The further the letter in the alphabet, the longer the wheelbase, and the larger the displacement and weight of the car in that segment. D-segment luxury sedans generally have extremely spacious interiors and powerful engines, with a wheelbase typically exceeding 2.8 meters and a displacement mostly above 3.0 liters. Examples of D-segment cars include models from brands such as the Mercedes-Benz S-Class, BMW 7 Series, Audi A8, Rolls-Royce, and Bentley. A-segment cars are divided into three subcategories. Among them, A00 can also be referred to as micro-compact cars, with a wheelbase between 2.0 and 2.2 meters and an engine displacement below 1 liter. For example, the Alto belongs to the A00 segment. A0-segment cars have a wheelbase of 2.2 to 2.3 meters and a displacement of 1 to 1.3 liters, with the two-door Xiali being a typical example. Generally, A-segment cars have a wheelbase ranging from 2.3 to 2.45 meters and a displacement of about 1.3 to 1.6 liters. Classic models in this segment include the FAW-Volkswagen Jetta and SAIC Volkswagen POLO. B-segment mid-range sedans have a wheelbase of approximately 2.45 to 2.6 meters and a displacement ranging from 1.6 to 2.4 liters. In recent years, the B-segment market has gradually become the main battleground for domestic automakers. Models such as the Audi A4, Passat, Zhonghua, and Eastar all belong to the B-segment. Increasingly, B-segment cars outperform A-segment cars in terms of features and performance, while their prices are becoming more comparable to A-segment cars, which is a major reason for their growing popularity. C-segment premium sedans have a wheelbase of about 2.6 to 2.8 meters and an engine displacement of 2.3 to 3.0 liters. The most renowned C-segment car in China is undoubtedly the Audi A6.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.