What is the effect of turning on the fog lights?

1 Answers
ArabellaLee
07/29/25 10:34pm
The effect of turning on the fog lights is to alert passing vehicles to your presence during foggy or rainy conditions. Below are the precautions for using car lights: 1. Driving in foggy conditions: Due to poor visibility in foggy weather, you should not only turn on the hazard lights but also the fog lights to alert passing vehicles. 2. In case of malfunction: Or in the event of a traffic accident, you should turn on the hazard lights to alert passing vehicles for safety. On highways, if a vehicle breaks down or is involved in an accident and stops without using the lights and setting up warning signs as required, 12 points will be deducted from the driver's license. 3. Towing a malfunctioning vehicle: Both the towing vehicle and the towed vehicle should turn on the hazard warning lights to alert passing vehicles that they are in an abnormal state. 4. Temporary parking: Turn on the hazard lights to alert other vehicles.
Was this review help?
19
1
Share
More Forum Discussions

What does BYD 55km mean?

BYD refers to the BYD Qin Plus-DMI with a range of 55km. The DM-i Super Hybrid technology is designed based on the high-safety Blade Battery and high-performance high-power electric motor, primarily relying on the high-power efficient electric motor for driving, while the gasoline engine's main role is to generate electricity within the efficient speed range. Here is more relevant information: 1. Range: Range can also be referred to as endurance capability, which indicates the total distance a vehicle or ship can travel continuously with maximum fuel reserve. For electric vehicles, the range refers to the distance traveled from a fully charged state of the power battery to the end of the test under standard conditions, which is an important economic indicator for electric vehicles. 2. The relationship between range and speed: Due to air resistance, when a car operates at high speed, most of the power is used to overcome air resistance. The magnitude of air resistance is determined by factors such as frontal area and speed. Higher speeds result in greater air resistance, which increases electricity and fuel consumption, directly reducing the range.
18
3
Share

Where is the mechanical keyhole of the Audi A4L?

The small hole on the car handle is the mechanical keyhole. Align the mechanical key with the small hole on the handle, insert the key into the hole, and you can open the car door. When the smart key of the car is low on battery and cannot unlock the door, you need to take out the mechanical key from the smart key to manually open the door. The smart key combines the remote control and transmitter into one, and the vehicle locks or unlocks based on the signals sent by the smart key. Below is some related information about the Audi A4L: 1. Advantages: Stylish and dynamic appearance with smooth lines; exquisite interior craftsmanship and good configuration; excellent sound effects; spacious and practical interior with good comfort; a classic brand. 2. Handling: Comfortable handling with a sporty style, wide field of vision, and good steering wheel feel; good tire grip, solid chassis, and decent off-road performance; responsive brakes with low noise, although some users report occasional throttle lag and noticeable steering wheel vibration at high speeds.
9
3
Share

Why Can't Seven-Seater Vehicles Drive on Highways in the Rain?

Seven-seater vehicles are prohibited from driving on highways in the rain due to safety concerns for passengers, aiming to reduce the potential for accidents causing mass casualties. Below is additional information related to highway traffic regulations: 1. Controlled sections: Mainline control area: G50 Shanghai-Chongqing Expressway, Chongqing-Shanghai direction from Baiyangtang Service Area to Cuiba Service Area. Toll station control area: G50 Shanghai-Chongqing Expressway, Chongqing-Shanghai direction from Jianshi to Gaojiayan Toll Station. 2. Control measures and requirements: Trucks and vehicles with seven or more seats are prohibited from entering the Chongqing-Shanghai mainline. During this period, trucks already on the mainline must wait at designated service areas along the Chongqing-Shanghai direction, including Baiyangtang Service Area, Cuiba Service Area, Yesanguan Service Area, Langting Parking Area, and the southern area of Gaojiayan Service Area. Additionally, trucks and vehicles with seven or more seats are prohibited from entering at Jianshi to Gaojiayan Toll Station.
2
0
Share

How to Turn on Car Fog Lights?

Methods to turn on car fog lights: 1. When the front fog light switch is in the 'on' mode, rotate the fog light switch knob to the front fog light position while the position lights or low beam lights are on, and the front fog lights will illuminate; 2. When the rear fog light switch is in the 'on' mode, rotate the fog light switch knob to the rear fog light position while the low beam lights are on, and the rear fog lights will illuminate. The knob will automatically return to its original position after being released; 3. When the ignition switch is in the 'on' mode and the front fog lights are on, rotate the fog light switch knob to both front and rear fog light positions, and both front and rear fog lights will illuminate. The knob will automatically return to the front fog light position after being released. Functions of fog lights: 1. Front fog lights are used to improve illumination when the road ahead is unclear and serve to alert oncoming drivers; 2. Rear fog lights help vehicles behind to spot the car in low visibility conditions.
1
1
Share

What is the Difference Between Dual-Clutch Transmission and AT Transmission?

The difference between a dual-clutch transmission and an AT transmission lies in the fact that the dual-clutch transmission is based on a manual transmission. In addition to offering the flexibility of a manual transmission and the comfort of an automatic transmission, it also provides uninterrupted power output. Traditional automatic transmissions (AT) use a single clutch. Below is a detailed introduction to automotive transmissions: 1. Overview: A transmission is a device that changes the speed ratio and direction of motion, typically located between the clutch and the central drive. It can alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. Gear-driven transmissions generally consist of a housing and several gears. 2. Classification: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types. Early AT transmission systems were primarily 4AT. AT transmissions achieve automatic gear shifting through an electronically controlled automatic operating system. CVT is a true continuously variable transmission with fewer parts and a compact size. DCT has two clutches.
9
5
Share

When should you straighten the steering wheel at the exit of the S-curve in Subject 2?

At the exit of the S-curve in Subject 2, you should straighten the steering wheel when the front of the car is aligned with the exit, then continue driving forward to leave the test area. Below are some tips for navigating the S-curve: 1. Avoid steering too abruptly: Maintain first gear throughout the process and avoid turning the steering wheel too sharply. 2. Take wider turns inside the curve: When entering a right curve, keep the right wheel close to the right edge of the road, and vice versa. While in the curve, adjust the steering wheel to ensure the small rearview mirror on the inner side of the car's hood remains at the edge of the outer white line—neither crossing it nor staying too far from the edge. 3. Adjust direction promptly: Adjust the steering direction in time based on the curve's characteristics and the rear wheel's radius.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.