What is the DS car?

What Causes the Abnormal Noise When Going Over Speed Bumps?

Abnormal noise when going over speed bumps is caused by the aging of the shock absorber's buffer rubber. Solution: Replace the aged shock absorber buffer rubber. Below is relevant information: 1. The connection points between the car's shock absorbers and the body are equipped with buffer rubber, which serves to enhance comfort and protect the body. If the shock absorber's buffer rubber becomes aged and hardened, it will cause abnormal noises when passing over speed bumps or uneven roads. The buffer rubber needs to be replaced. 2. Replacing the buffer rubber requires disassembling the shock absorber. When installing the shock absorber, tighten the screws in the specified sequence and always use a professional torque wrench to tighten the screws to the specified torque. After installing the shock absorber, perform a four-wheel alignment on the car to prevent issues such as deviation and uneven tire wear.

12

3

Share

What Causes the Engine Abnormal Noise in Magotan?

Magotan engine abnormal noise mainly has the following reasons: 1. Piston slap noise: The so-called piston slap noise refers to the abnormal noise generated when the piston side knocks against the cylinder wall. Generally speaking, when the direction of the axial force on the piston top changes as the piston moves from the compression stroke to the power stroke, piston slap noise will occur. 2. Crankshaft bearing (big end) and connecting rod bearing (small end) noise: These two types of noise can be distinguished first by the sound location and frequency. Generally, the big end produces a lower-pitched sound, while the small end produces a higher-pitched sound. 3. Intake and exhaust system noise: When there is an intake manifold leak, the engine will produce noise during idle operation, and the noise will intensify as the engine speed increases.

19

1

Share

Why does the car windshield feel oily on rainy days?

Car wax and dust can easily get trapped in these tiny pores, forming a contamination layer—the oily film layer, which is also the main reason why the front windshield often doesn't stay clean. Below is some relevant information: Windshield: Car windshields are generally made as a single large curved piece, with a certain curvature on all sides. This curved glass is a highly technical product, both in terms of the manufacturing process and the fitting during assembly, as it involves numerous factors such as vehicle model, strength, heat insulation, and installation. Function of the Windshield: Tempered glass refers to ordinary glass that has been quenched to create internal stresses, thereby strengthening the glass. When impacted and shattered, the glass breaks into small pieces with blunt edges, reducing the risk of injury to passengers.

17

4

Share

How to Exit Navigation in Haval H6?

To turn off the navigation in Haval H6, simply click "Exit Navigation" on the map interface. Alternatively, you can manually shut down the navigation device by pressing and holding the power button for 3 seconds. More related information is as follows: 1. The car GPS navigation system consists of two parts: one part is the GPS receiver and display device installed in the car; the other part is the computer control center. 2. The car navigation system features Beidou satellite navigation or GPS global positioning system functions, allowing you to know your exact location at any time while driving. The automatic voice navigation and optimal path search functions of the car navigation system provide you with shortcuts and smooth travel, while the integrated office and entertainment functions make driving easy and efficient. The Beidou navigation system also has a short message function.

11

0

Share

What does cylinder misfire mean?

Cylinder misfire refers to: the first cylinder of the engine not performing work or having insufficient work capacity, usually an intermittent fault. Below is detailed information on the causes and solutions for cylinder misfire: Causes of cylinder misfire: Ignition system failure: includes spark plug failure, ignition coil failure, fuel injector failure, etc. When the car's ignition system has a problem, the fuel and air mixture cannot be ignited normally, leading to the phenomenon of engine misfire. Faulty wiring can also cause engine vibration. Engine temperature too high, poor quality engine oil. Methods to address cylinder misfire: Inspect the car's ignition system, replace spark plugs, and clean the fuel lines. Check the car's wiring for any short circuits or open circuits and repair them immediately. Check if the engine temperature is too high.

12

3

Share

Does the Trumpchi GS8 have four-wheel drive?

Trumpchi GS8 does have a four-wheel-drive version, equipped with an on-demand four-wheel-drive system. Here is an introduction to the Trumpchi GS8: 1. The Trumpchi GS8 is a mid-size SUV. 2. The vehicle's dimensions are 4810 mm in length, 1910 mm in width, and 1770 mm in height, with a wheelbase of 2800 mm. 3. The front suspension of the Trumpchi GS8 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. 4. The new model of the Trumpchi GS8 is powered by a 2.0-liter turbocharged engine, which delivers a maximum power of 185 kW and a maximum torque of 390 Nm. The engine reaches its maximum power at 5250 rpm and its maximum torque between 1750 and 4000 rpm. It is paired with a 6-speed automatic transmission.

6

1

Share

What is the DS car?

What Causes the Abnormal Noise When Going Over Speed Bumps?

What Causes the Engine Abnormal Noise in Magotan?

Why does the car windshield feel oily on rainy days?

How to Exit Navigation in Haval H6?

What does cylinder misfire mean?

Does the Trumpchi GS8 have four-wheel drive?

Where is the production base of Haval H6?

Should the Encore use 5W30 or 5W40 engine oil?

What is the length of the FAW Sagitar?

Can Shower Gel Be Used to Wash Cars? Will It Damage the Paint?