What is the driving mode of Geely Xingrui e?

1 Answers
Jessica
07/29/25 11:17am
Geely Xingrui e has three driving modes: Eco mode, Normal mode, and Sport mode. Eco mode: When this switch is turned on, the vehicle operates in an economical driving mode. The vehicle's computer controls the fuel injection quantity, and the transmission control module manages the shift logic to ensure the most economical driving. During operation, the system comprehensively evaluates and analyzes factors affecting fuel consumption such as automatic transmission gear, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel quantity to provide to the engine, effectively reducing fuel consumption compared to normal driving mode. Normal mode: Normal mode ensures consistent power output while achieving better fuel economy. In this mode, the throttle response is balanced, offering simpler and more comfortable handling, making it easy to drive. Sport mode: When Sport mode is activated, the electronic control unit increases the engine speed to maintain sufficient torque, enabling quick acceleration and deceleration, thus fully showcasing the car's performance. Additionally, the vehicle adjusts other settings, such as stiffening the suspension for greater support, enhancing throttle sensitivity, increasing engine air intake, though this also results in higher fuel consumption.
Was this review help?
16
0
Share
More Forum Discussions

How to Use the Type-C Port in a Car?

The Type-C port in a car can be used to connect a mobile phone for charging, as well as for data transfer. It can also transmit audio and video signals, expanding into various audio and video output interfaces such as HDMI, DVI, and VGA, even supporting extensions up to 4K resolution. Below is more information about car interfaces: 1. OBD Interface: OBD is a diagnostic system extended for vehicle fault detection, capable of real-time monitoring of systems and components like the engine, catalytic converter, particulate filter, oxygen sensors, emission control system, fuel system, and EGR. 2. ISOFIX Interface: The ISOFIX interface is an international standard fixing device. It is a new standard for installing child seats in cars, which is being adopted by many car manufacturers. Its purpose is to make the installation of child seats quick and simple.
10
0
Share

What is the difference between Michelin XM2+ and XM2?

Michelin XM2+ and XM2 mainly have the following differences: 1. The difference between Michelin XM2+ and XM2 is that XM2+ is the new generation product of XM2 Energy Saver. As an enhanced version, XM2+ not only maintains the consistent characteristics of Energy Saver, such as a strong and sturdy tire body and short braking distance, but also further enhances the wear resistance of Energy Saver, helping to reduce the wear rate and achieve ultra-long mileage. 2. The braking distance of XM2+ is shorter than that of XM2. According to the wet braking test conducted by the China Automotive Technology and Research Center, the average braking distance of new XM2+ tires is 9.80% shorter than that of XM2.
19
1
Share

Symptoms of a Faulty Charcoal Canister Solenoid Valve in a Car

When the charcoal canister solenoid valve is damaged, the following symptoms may occur: 1. Abnormal noises during driving: When the engine is running at speeds above 800 RPM (not idling), occasional abnormal noises can be heard. 2. Jerking when accelerating and a strong gasoline smell inside the car: In this case, special attention should be paid to whether the pipes of the charcoal canister system are cracked. If the pipes are cracked, gasoline vapors will directly escape into the atmosphere through the cracks, causing a strong gasoline smell inside the car. 3. Fluctuating idle speed and poor acceleration: After the engine starts, the idle speed fluctuates regularly, and the car experiences poor acceleration. At this time, it is important to check whether the issue is caused by a blockage in the air inlet or filter of the charcoal canister.
2
0
Share

What Happens When the Lower Control Arm Bushing of a Car Ages and Cracks?

Here are the effects of aging and cracking in the lower control arm bushing of a car: 1. If the lower control arm bushing is damaged, the tire will swing abnormally while driving. During inspection, check whether the clearance of the ball joint in the lower control arm has increased. 2. If the rear bushing of the lower control arm is damaged or cracked, it will cause abnormal noises when the vehicle is driven on uneven roads. 3. The lower control arm of a car guides and supports the suspension. Its deformation affects wheel alignment and reduces driving stability. If the front control arm of the car is damaged, the steering wheel will shake, and the car is prone to deviation when the hands are released from the steering wheel.
4
2
Share

Can You Turn on the Air Conditioning When the Car is Parked?

It is best not to turn on the air conditioning when the car is stationary. This is because the air conditioning consumes fuel during operation, and prolonged use in this state can adversely affect the car's engine, leading to carbon buildup in the generator and even clogging the exhaust pipe's tailpipe. Additionally, running the air conditioning while stationary increases fuel consumption. Below is more information about car air conditioning: 1. Cooling Principle: When the car air conditioning is cooling, the compressor clutch engages, causing the engine to drive the compressor. The compressor continuously compresses the refrigerant and delivers it to the evaporator. The refrigerant expands inside the evaporator, absorbing heat, which cools the evaporator. The cooled evaporator then cools the air blown by the blower. 2. Heating Principle: When the car air conditioning is heating, the engine's high-temperature coolant flows through the heater core. At the same time, the air blown by the blower also passes through the heater core, allowing the air conditioning vents to blow warm air.
1
4
Share

What are the causes of high water temperature in Baojun 510?

There are many reasons for the high water temperature in Baojun 510, mostly due to lack of antifreeze, whether the thermostat is intact, water pipe leakage, or insufficient coolant. Common causes include fan belt breakage, radiator or water pipe leakage, thermostat failure, and engine oil leakage. The following are related introductions about Baojun 510: 1. Introduction 1: The length, width, and height of this car are 4220 mm, 1740 mm, and 1615 mm respectively, with a wheelbase of 2550 mm. Baojun 510 is a small SUV, featuring a very attractive exterior design and a spacious interior. 2. Introduction 2: Baojun 510 is equipped with a 1.5-liter naturally aspirated engine, which has 105 horsepower. The engine is paired with a 6-speed manual transmission, a 5-speed AMT transmission, or a CVT transmission. 3. Introduction 3: The CVT transmission shifts smoothly, has a simple structure, and offers excellent reliability and durability. The manufacturing cost of the CVT transmission is relatively low, making it very suitable for affordable automatic transmission family cars.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.