What is the Driving License Number?

1 Answers
JakeDella
07/29/25 1:57pm
Driving license number refers to the digital number printed in the 'File Number' column on the motor vehicle driving license. Here are specific details about the driving license: 1. Function: The owner registered on the driving license is the legally recognized owner of the vehicle, with the legal right to use and dispose of the property. In case of traffic accidents or economic disputes, this person is also the legally designated responsible party. Insurance claim documentation: For insured motor vehicles, if an accident covered by the insurance policy occurs, the insurer will only process the claim if the policyholder presents the 'Motor Vehicle Driving License' and it is valid (i.e., the vehicle has undergone the annual inspection on time). 2. Verification: The driving license verification system can check and compare the authenticity of motor vehicles, query vehicle information, and provide travel safety assurance.
Was this review help?
18
1
Share
More Forum Discussions

What to Do When the Car Behind Keeps Using High Beams?

Methods to deal with the car behind constantly using high beams: 1. Apply the brakes lightly several times to alert the driver behind using the brake lights; 2. Wear anti-glare glasses, which can reduce glare and minimize visual interference to some extent; 3. Record the incident with a dashcam and report it to the traffic authorities, as the driver using high beams will face corresponding penalties; 4. Choose to slow down in a safe section of the road, allowing the vehicle behind to pass and move ahead. High beams can expand the field of vision while driving on roads without streetlights, providing a much wider range of visibility compared to low beams. It is advisable to use high beams on roads with poor lighting conditions.
5
0
Share

What should you pay attention to when driving in heavy rain?

When driving on rainy days, road surfaces are prone to water accumulation and become slippery, reducing the friction between the wheels and the ground, which can easily cause the vehicle to skid. Therefore, it is essential to reduce your speed. In heavy rain, visibility is impaired, so it's important to increase the distance between vehicles. Exercise caution when driving through waterlogged areas; attempting to pass through severely flooded sections may lead to water entering the engine, causing it to stall. Before driving in the rain, always check your windshield wipers. If water mist obstructs your view while driving, promptly turn on the wipers and the car's air conditioning to ensure the windshield remains clear. Otherwise, obstructed visibility poses significant risks. Slow down and avoid sudden braking. When roads are wet, the friction between the tires and the road decreases, making the vehicle more prone to skidding and increasing braking distance. Therefore, it's crucial to drive at a reduced speed and avoid sudden braking to prevent the car from veering off course. Make turns slowly and avoid sharp steering. Due to slippery conditions during rainy weather, turns should be made slowly and gradually. Otherwise, reduced friction can cause the vehicle to fishtail, leading to dangerous situations. Minimize lane changes and overtaking. Poor visibility and slippery roads make the car harder to control than usual, so it's best to stay in your lane and avoid unnecessary maneuvers. Maintain a longer following distance. Wet roads increase braking distance, so drivers should keep a more reasonable distance between vehicles to ensure safety in emergencies. Use your lights properly! With reduced visibility in the rain, always turn on your low beams, position lights, and fog lights. However, avoid using hazard lights (double flashers), as this could result in fines and penalty points.
8
0
Share

What Causes the Engine to Sound Louder When Driving in Winter?

When driving in winter, the engine sounds louder because the engine needs to reach its optimal operating temperature and power various equipment, which requires a larger throttle opening, resulting in increased engine noise. Once the equipment operates normally and the engine reaches its standard temperature, the throttle opening decreases, and the noise reduces accordingly. Vehicles equipped with turbocharged engines tend to produce even louder noises during cold starts. To minimize engine noise, a dual-spring fuel injection valve can be employed to achieve pre-injection. This method splits the fuel intended for a single cycle into two injections: a small portion is injected first, initiating a pre-reaction before the main injection. This reduces the amount of combustible mixture accumulated during the ignition delay period, effectively lowering combustion noise in direct-injection diesel engines.
2
2
Share

What is the fuel injection method of the Infiniti Q50L engine?

The fuel injection method of the Infiniti Q50L engine is multi-point electronic fuel injection. Multi-point electronic fuel injection means that during the operation of the gasoline engine, the fuel injection process takes place in the intake manifold, controlled by a specific timing sequence issued by the control program and completed via electronic fuel injectors. The Infiniti Q50L is a luxury mid-size sedan under the Infiniti brand, offering two engine options: a 3.7L V6 engine and a 3.5L Hybrid powertrain, paired with a 7-speed automatic transmission. The Infiniti Q50L embodies Infiniti's newly upgraded "Breakthrough Aesthetics" design philosophy, showcasing a fusion of "power" and "elegance." It comes in seven distinctive body colors—Pearl White, Platinum Graphite, Malbec Black, Vibrant Red, Liquid Platinum, Graphite Shadow, and Sea Glass Blue—providing users with diverse and personalized purchasing options.
9
0
Share

How can beginners judge the distance of the car body?

Methods for beginners to judge the distance of the car body are: 1. Drive 60 centimeters away from the center line. When the driver is driving normally, maintaining a distance of 60 centimeters from the center line is relatively safe. When the driver's line of sight aligns the intersection of the windshield and the pillar with the center line, the car body is exactly 60 centimeters away from the center line. 2. Look at the upper edge of the rear bumper of the car in front—the distance is 1 meter. Seeing the lower edge of the rear bumper indicates a distance of 2 meters, and seeing the lower edge of the rear tires indicates a distance of 3 meters. Beginners on the road tend to be nervous, which is not conducive to normal driving. In a very flustered state, people are prone to making wrong judgments. Therefore, beginners should adjust their mindset before driving to remain calm in the face of danger.
4
0
Share

What grade of gasoline should a Polo use?

Polo can use either 92 or 95 octane gasoline. The difference between 92 and 95 octane gasoline lies in the ratio of n-heptane and isooctane: 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. The higher the proportion of isooctane, the better the anti-knock performance. Different grades of gasoline can be mixed, but it is not recommended. Car owners should correctly add gasoline according to the car manual or the label on the fuel tank cap. Cars requiring high-grade gasoline need gasoline with better anti-knock performance. Using low-grade gasoline will cause knocking in the engine cylinder. Cars requiring low-grade gasoline will not experience knocking when using high-grade gasoline, but excessive carbon deposits may occur due to insufficient temperature and pressure in the cylinder.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.