What is the drivetrain type of the Volkswagen Lavida?

2 Answers
NaomiFitz
07/29/25 10:48pm
The drivetrain type of the Volkswagen Lavida is front-wheel drive, which occupies less space and has a lower failure rate. The Lavida is divided into the 2019 and 2018 models, and it is equipped with either a 1.5L naturally aspirated engine, a 1.2L turbocharged engine, or a 1.4L turbocharged engine. The 1.5L naturally aspirated version has a maximum horsepower of 112 hp, the 1.2L turbocharged version has a maximum horsepower of 116 hp, and the 1.4L turbocharged version has a maximum horsepower of 150 hp. In terms of transmission, the Lavida is matched with a 5-speed manual, a 6-speed automatic manual, or a 7-speed dual-clutch transmission.
Was this review help?
5
2
Share
AubreyRose
08/16/25 12:16am
I think the Volkswagen Lavida is front-wheel drive, which means the engine's power is directly transmitted to the front wheels, making it agile in city driving and spacious inside. As a family car, the engine layout saves interior space, provides a larger trunk, and offers better fuel efficiency. I remember driving this car to work—it felt light during commutes, with quick acceleration and crisp handling in turns. Additionally, the front-wheel-drive design reduces costs and simplifies maintenance, unlike rear-wheel or all-wheel-drive systems that require complex drivetrains. The only thing to note is that it may not have as much traction as all-wheel drive in snow or rain, but it’s absolutely stable on paved roads. Overall, the Lavida focuses on being economical and practical, with easy driving dynamics suitable for both beginners and experienced drivers.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

What displacement is equivalent to 5t?

5t is equivalent to a 2.0L displacement. A 1.5t engine is essentially a 1.5L naturally aspirated engine equipped with a turbocharger to enhance the engine's output power and torque. Generally, the power of a turbocharged engine can reach a level equivalent to 1.3 to 1.5 times that of a naturally aspirated engine of the same displacement. The maintenance methods for turbochargers include: 1. Avoid pressing the accelerator pedal too hard immediately after starting the car engine; 2. Do not turn off the engine immediately after prolonged high-speed operation; 3. Choose the appropriate engine oil; 4. Regularly clean the engine oil and filters; 5. Clean the air filter on time; 6. Regularly inspect the sealing rings of the turbocharger; 7. Clean the air filter periodically; 8. Regularly check the lubrication oil pipes and joints.
17
2
Share

How to Read a Micrometer Scale?

Reading steps for a micrometer are as follows: Read the scale on the fixed sleeve corresponding to the left end face line of the movable sleeve; Align one of the scale lines on the movable sleeve with the zero reference line on the fixed sleeve and read the scale; Add the readings of the above two scales. Below is a detailed introduction to micrometers: Brief Description: A micrometer, also known as a screw gauge, screw micrometer, or micrometer caliper, is a more precise tool for measuring length compared to a vernier caliper. It can measure lengths accurately up to 0.01mm, with a measurement range of several centimeters. Classification of Micrometers: Micrometers can be divided into mechanical micrometers, electronic micrometers, vernier reading outside micrometers, small head outside micrometers, pointed head outside micrometers, wall thickness micrometers, sheet thickness micrometers, and micrometers with a micro head to be measured, among others.
20
4
Share

What are Main Road Vehicles and Auxiliary Road Vehicles?

Here is the explanation of main road vehicles and auxiliary road vehicles: 1. Auxiliary road vehicles: Auxiliary roads are roads that distribute traffic from expressways, located on one or both sides of the expressway, with one-way or two-way traffic. Generally, these roads are narrower and help alleviate the pressure on the main road. 2. Main road vehicles: Vehicles traveling on the main road are called main road vehicles. The main road is exclusively for motor vehicles, while auxiliary roads allow mixed traffic of motor vehicles, non-motor vehicles, and pedestrians. Another key difference is speed: the speed limit on main roads is generally 30-60 km/h. 3. The most crucial distinction between main roads and auxiliary roads is that main roads are only for motor vehicles, while auxiliary roads accommodate mixed traffic of motor vehicles, non-motor vehicles, and pedestrians. Additionally, the speed limit on auxiliary roads must not exceed 60 km/h, whereas main roads can have speed limits above 80 km/h.
9
3
Share

How to Diagnose Faults in a Car's Ignition System?

Diagnostic methods for faults in an electronically controlled ignition system are as follows: 1. Electronically controlled ignition system: Typically, an ignition coil consists of two main coils—the primary coil and the secondary coil. These two coils play a key role in ignition by converting voltage from low to high. Since the primary coil has more turns than the secondary coil, the ignition coil can transform the vehicle's low voltage into high voltage. 2. Principle: When current is conducted to the primary coil, electrical energy is converted into magnetic energy within the primary coil, gradually forming a strong magnetic field around the coil, which stores the magnetic energy in the coil's iron core. Generally, the coil is equipped with a switching device. When the switching device disconnects the primary coil's circuit, the magnetic field rapidly decreases due to the absence of current, and the secondary coil, having fewer turns, induces a very high voltage. Understanding this principle allows for diagnostic troubleshooting when a fault in the ignition system is initially suspected.
8
3
Share

How to Remove the Blower in Buick Encore?

Buick Encore blower removal method: The blower is located under the dashboard on the passenger side, near the air filter. First, the dashboard needs to be removed, followed by disconnecting the water pipes and air conditioning tubes to access the blower. The entire blower can then be taken out. It is recommended not to attempt this removal by yourself. Taking the 2020 Buick Encore as an example, it belongs to the small SUV category with body dimensions of 4295mm in length, 1798mm in width, and 1607mm in height, a wheelbase of 2570mm, a fuel tank capacity of 40 liters, and a curb weight of 1245kg. This vehicle is equipped with a 1.0L turbocharged engine delivering a maximum horsepower of 125PS, a maximum power of 92kW, and a maximum torque of 180Nm, paired with a 6-speed automatic transmission.
5
3
Share

What are the causes of front wheel tire wear?

The causes of front wheel tire wear are: 1. Incorrect toe-in value or camber angle, which can be resolved by performing a four-wheel alignment; 2. Deformation of the suspension chassis, which requires repair at a 4S shop. Situations that require a four-wheel alignment include: 1. Damage to the chassis and suspension caused by an accident; 2. Replacement of the steering system and its components; 3. Unilateral wear on the front or rear tires; 4. Replacement or adjustment of the suspension system; 5. The car pulling to the left or right when driving straight. The function of the car chassis is to support and install the car engine and its various components and assemblies, forming the body shape, receiving the engine's power to make the car move and maintain normal driving.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.