What is the Driver's License Study and Score Reduction Program?

1 Answers
StIsabelle
07/30/25 7:56am
According to Article 5 of the Notice on Issuing the "Work Standards for Reducing Points of Road Traffic Violations by Accepting Traffic Safety Education (Trial)" issued by the Ministry of Public Security on January 14, 2020 (Gong Jiao Guan [2020] No. 14): Motor vehicle drivers who apply to participate in traffic safety education to reduce points for traffic violations should participate in corresponding road traffic safety laws, regulations, and related knowledge learning, examinations, or traffic safety public welfare activities according to their highest permitted driving model and meet relevant requirements to apply for a reduction in traffic violation points. The Study and Score Reduction program is a measure for drivers holding a driver's license who have been penalized with points due to traffic violations. After participating in online traffic safety learning and passing the examination, their penalty points can be reduced. This program is a convenient traffic management measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Specific precautions are as follows: Applicable groups: Motor vehicle drivers who hold a driver's license of the People's Republic of China, regardless of the permitted driving model or whether they are commercial vehicle drivers, can participate in the Study and Score Reduction program. They should participate in corresponding road traffic safety laws, regulations, and related knowledge learning and examinations according to their highest permitted driving model. Specific rules: Motor vehicle drivers participating in online road traffic laws, regulations, and related content learning must study continuously for 5 minutes each time, accumulate 30 minutes of study time within 3 days, and then register for an examination within 7 days. Passing the examination can reduce 1 point. Drivers can also attend on-site learning, with each session lasting no less than 1 hour. After completing the required study hours, they can apply for an examination. Passing the examination can reduce 2 points. Cases not accepted: The following situations will not be accepted: In the last scoring cycle, the driver had more than two full-point records. Within three scoring cycles, the driver was involved in hit-and-run accidents, drunk driving, or the manufacture or alteration of documents or license plates. The driver's license is in the probation period or has not been reviewed on time. The driver has unresolved traffic violation records. The driver has a motor vehicle with an expired safety technical inspection or not deregistered as required. The driver has already reduced the maximum of 6 points in the current cycle.
Was this review help?
7
0
Share
More Forum Discussions

Operation and Purpose of Each Gear in a Tiptronic Transmission

Tiptronic transmission operation methods are as follows: 1. Parking Gear (P): Depress the brake pedal when shifting out of P gear. Additional notes: The vehicle must come to a complete stop before using P gear, otherwise it may damage mechanical components of the automatic transmission. 2. Reverse Gear (R): Select this gear when the vehicle is stationary and the engine is idling. Additional notes: Never force shift into reverse gear before the vehicle comes to a complete stop, as this may cause severe transmission damage. 3. Neutral Gear (N): Always engage the parking brake when parked, and neutral gear is prohibited during driving or downhill. Additional notes: Neutral gear can be used when towing the vehicle. 4. Drive Gear (D): Shift to drive gear in automatic shifting mode. Additional notes: Drive gear can be engaged while driving. 5. Sport Mode: High-speed shifting mode for overtaking or high-speed driving. Additional notes: Suitable for multiple curves, mountainous areas, overtaking situations, etc.
15
2
Share

Does the Volkswagen Tiguan need underbody armor?

Volkswagen Tiguan cars should have underbody armor. The specific reasons are as follows: 1. Underbody armor can prevent small stones from hitting the car's underbody. During driving, small stones may be kicked up and hit the underbody, causing damage over time. 2. Underbody armor can prevent raised areas from causing wear to the car's underbody. On different road surfaces, there may be raised areas that cause wear to the underbody. Adding underbody armor can prevent this wear. 3. Underbody armor can isolate heat and maintain the temperature inside the car, thereby reducing fuel consumption. When the ground temperature is high, the car's underbody can conduct heat into the interior. If the air conditioning is on, more fuel will be needed to lower the interior temperature.
10
0
Share

How to Reset the Outlander Tire Pressure Warning?

The method to reset the Outlander tire pressure warning light is to inflate the tires to the normal pressure range; then start the engine, use the control buttons on the left side of the steering wheel to navigate the onboard computer, find the "Tire" option, click to enter, and long-press the "Onboard Computer Control" button on the left control panel to reset, which will eliminate the tire pressure warning light. Tire pressure monitoring automatically checks the tire pressure in real-time while driving and alerts the driver to low pressure or leaks to ensure driving safety. There are three common types of tire pressure monitoring systems: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors the tire pressure. Indirect tire pressure monitoring systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS) Overview: This system combines the advantages of both direct and indirect systems. It equips direct sensors in two diagonally opposite tires and includes a four-wheel indirect system. Compared to a full direct system, this hybrid approach reduces costs and overcomes the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as a direct system does.
13
5
Share

What type of engine oil is suitable for the Ford Kuga?

The Ford Kuga originally uses 5W-30 semi-synthetic Mobil engine oil. Below is relevant information about it: 1. The 5W-30 semi-synthetic Mobil engine oil provides excellent protection for the engine. It is recommended to use semi-synthetic oil during oil changes, preferably the original factory oil. 2. The 5W-30 viscosity grade has strong adaptability across most regions in China, though colder areas like Northeast China may require engine oil with higher fluidity. 3. When selecting engine oil, consider the local maximum and minimum temperatures, the vehicle's grade, and its condition. For engines with significant wear and larger component clearances, a higher viscosity grade engine oil can be chosen to enhance the sealing performance of the components.
1
4
Share

What are the impacts of increased engine oil?

The impacts of increased engine oil: reduced lubrication and decreased sealing performance, leading to severe engine wear. More details about increased engine oil are as follows: 1. Causes of increased engine oil: Low temperatures and low-speed driving are significant factors contributing to increased oil levels. 2. Solutions for increased engine oil: Warm up the car more in low-temperature environments and drive at high speeds to allow the engine to reach sufficient temperature, enabling the evaporation of gasoline or moisture mixed into the oil. 3. If the issue of increased engine oil persists, promptly visit a 4S shop for maintenance. 4. Under high-temperature engine operation, the gasoline, exhaust gases, and small amounts of water mixed into the oil can be separated and directed into the combustion chamber for secondary burning, while the oil vapor is redirected back to the crankcase, maintaining the oil in a dynamically stable state.
14
0
Share

What does the kettle symbol on a car indicate?

The kettle symbol on a car is the engine oil warning light. More information about the engine oil warning light is as follows: 1. The engine oil warning light is used to display the oil pressure status inside the engine. 2. When the ignition is turned on and the vehicle begins its self-check, the indicator light will illuminate and then turn off after the engine starts. If this indicator light remains on, it means the engine oil pressure is below the specified standard and requires maintenance. 3. When the engine oil warning light is on, it indicates that the current oil level or oil pressure in the car is abnormal. It is essential to stop the vehicle immediately to check for any oil leaks or low oil levels, inspect the engine for abnormalities, and contact towing services as soon as possible to prevent further damage.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.