What is the door opening style of the BYD Han?

1 Answers
StTaylor
07/30/25 3:48am
The BYD Han features a coach door (suicide door) opening style. Here are some key details about the BYD Han: 1. Exterior: The BYD Han is a mid-to-large size sedan under the BYD brand, with a wheelbase of 2920mm, and dimensions of 4980mm in length, 1910mm in width, and 1495mm in height. 2. Configuration: The front suspension uses MacPherson independent suspension, while the rear employs a multi-link independent suspension system, which enhances both handling and ride comfort. 3. Powertrain: The 2.0L turbocharged engine delivers 192 horsepower and 320 N·m of maximum torque, featuring direct fuel injection technology with an aluminum alloy cylinder head and block. Paired with this engine is an electric motor producing maximum power of 180kW and maximum torque of 330 N·m.
Was this review help?
20
1
Share
More Forum Discussions

What are the configurations and dimensions of Dongfeng Fengxing M6?

Fengxing M6 features an oversized body with the following dimensions: Short-wheelbase version - Length/Width/Height: 4740*1770*1915mm, Wheelbase: 2900mm. Long-wheelbase version - Length/Width/Height: 5080*1770*1915mm, Wheelbase: 3200mm. Below are the configuration details regarding Fengxing M6's dimensions: 1. The Fengxing M6 adopts a 2+2+3 seven-seat layout, with the second row featuring independent seats equipped with dual armrests on both sides, while the third-row seats support 50:50 split-folding and stowing. 2. The Fengxing M6 comes with keyless entry and one-touch start functionality, and the windows are fitted with privacy glass, ensuring better passenger privacy whether for simple business receptions or family use. The rear design is relatively square, with vertically arranged taillights. The rear is equipped with a high-mounted brake light, rear wiper, reversing camera, and four parking sensors, offering comprehensive convenience features.
5
5
Share

What to Do When Car Tire Pressure is Insufficient?

Solutions for insufficient car tire pressure are as follows: 1. Visually inspect whether the tire can still continue to drive. If possible, drive to the nearest tire repair shop for treatment. 2. If the tire pressure is too low to drive, use a car air pump to inflate a little and then go to the nearest repair shop. 3. Replace the spare tire. The impact of tire pressure on vehicle safety is as follows: 1. Too high or too low tire pressure will cause part of the tread to not touch the ground, thereby reducing the tire's grip and affecting the safety performance of driving. 2. Over-inflated tires will over-tighten the tire body and fatigue the tire shell. The tire shell is prone to cracking and damage. 3. Under-inflated tires will deform excessively and overheat, eventually leading to tire shell rupture. 4. Air pressure can also affect vehicle control.
20
2
Share

What Causes Engine Oil in the Radiator?

The main reasons for engine oil entering the radiator are as follows: 1. Cylinder liner damage. 2. Radiator damage. 3. Cylinder head gasket damage. If any damage is found, simply replace the damaged part with a new one, but afterward, the radiator must be thoroughly cleaned. Below are the steps for dealing with engine oil in the car radiator: 1. Disconnect the overflow tank and turn off the heater (set the switch to the cold air position). 2. After starting the vehicle and allowing the water temperature to rise, use a water hose to flush the radiator opening until no significant oil traces remain, then stop. 3. Turn off the engine, open the radiator drain valve, and start the engine once water begins to flow out. Continue adding water to the radiator opening to allow circulation for 5 minutes, then turn off the engine and stop adding water. After all the water has drained from the radiator, close the drain valve and refill with water. 4. Start the vehicle without covering the radiator cap, and after heating up, observe if there are any oil traces at the radiator opening. If none are found, the procedure is effective. 5. Reconnect the overflow tank and replace the coolant as needed.
13
4
Share

How to Force Close the Sunroof on an Audi Q5?

Audi Q5 sunroof forced closing method is as follows: 1. Remove the fuse box cover on the driver's side dashboard. You can directly use a key or a flat-head screwdriver from the trunk for removal. 2. Take out the sunroof crank handle from the back of the cover. 3. Remove the dome light cover. 4. Remove the driver's side dome light bulb. 5. Insert the special sunroof wrench into the motor shaft and turn the wrench to close the sunroof. Audi Q5 sunroof matching method is as follows: 1. First, insert the vehicle key into the ignition and power on the vehicle; otherwise, the sunroof cannot be matched. 2. Locate the sunroof control knob on the vehicle's roof to match the sunroof. 3. Rotate the sunroof control knob clockwise to its maximum position. 4. Press the button shown on the sunroof knob and hold it for five seconds until a beep is heard, then release. 5. The vehicle sunroof matching is successful.
15
4
Share

Can I Add Water to Windshield Washer Fluid?

Adding water to windshield washer fluid is not recommended. Windshield washer fluid, also known as car window cleaning solution, serves multiple purposes beyond just cleaning, including lubrication, antifreeze, anti-fogging, and anti-static properties. While adding water may partially achieve a cleaning effect, tap water often contains impurities that can corrode rubber hoses and clog nozzles over time. Currently, there are three types of windshield washer fluids available: one for summer use, which contains not only standard cleaning agents but also insect-removing compounds to quickly eliminate insect residues on the windshield; another for winter use, featuring antifreeze properties that allow it to function normally at temperatures as low as -20°C, preventing freezing and even melting ice and snow to some extent; and a third type designed for extremely cold regions, capable of remaining unfrozen even at -40°C.
19
0
Share

Can I add engine oil right after stopping the car?

You can add engine oil right after stopping the car, but you need to pay attention to the amount added. Since the oil level differs between a cold engine and a hot engine, the oil level in a hot engine is usually slightly lower than in a cold one. Therefore, when adding oil to a hot engine, be cautious not to overfill it to avoid exceeding the upper limit on the dipstick when the engine cools down, which could lead to oil leaks. The optimal oil level should be slightly above the middle mark on the dipstick, and it can be a bit lower when the engine is hot. Here are some important points to note when adding engine oil: 1. For older cars, it is recommended to check the oil level every two months, while for new cars, every 3 to 4 months. If the oil level is found to be insufficient, it should be replenished promptly. Avoid mixing different brands or specifications of engine oil. 2. Regular inspection and maintenance of the engine oil, especially the oil level, are essential. Insufficient oil can affect the normal lubrication of the engine, increase wear, and negatively impact engine performance and lifespan.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.