What is the Dongfeng Kia Sportage?

2 Answers
VonLayla
07/29/25 11:56am
Kia Sportage is a compact SUV under the Kia brand, known as 'Lion Run' in Chinese. The Lion Run is equipped with two engine options: a 2.0-liter naturally aspirated engine and a 2.7-liter naturally aspirated engine, paired with either a 5-speed manual transmission or a 4AT transmission. The Lion Run is available in both front-wheel-drive and four-wheel-drive versions. The four-wheel-drive version features an on-demand four-wheel-drive system with a multi-plate clutch-type center differential. Vehicles with an on-demand four-wheel-drive system do not always power all four wheels; they predominantly operate in two-wheel-drive mode under normal conditions and switch to four-wheel drive only in specific road conditions. The Lion Run uses a MacPherson independent suspension for the front and a double-wishbone independent suspension for the rear.
Was this review help?
17
3
Share
EvangelineRose
08/13/25 9:16pm
I've been driving the Sportage for a while now. It's a compact SUV produced by Dongfeng Kia, and you can see it quite often on the road. The exterior design is quite modern, with that large front grille and sharp lines giving it a sporty feel. The engine options include a 1.6T turbo or a 2.0L naturally aspirated—I drive the 1.6T, which provides sufficient power. Fuel consumption is around 8 liters in the city and drops a bit on the highway. The space is quite spacious, with comfortable front seats and enough room for three in the back. The trunk can fit four or five suitcases, making it great for family trips. The safety features are decent, including automatic braking and lane-keeping assist, which make driving feel secure. The interior is mostly plastic, but the build quality is acceptable. The infotainment screen responds quickly and connects easily to smartphones. Priced around 200,000 yuan, it offers good value for a new car, suitable for daily commutes and weekend road trips. Maintenance at the dealership isn’t expensive either, costing just a few hundred yuan each time.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What items are included in the third car maintenance?

Regular items for the third car maintenance include changing the engine oil, oil filter, air filter, cabin air filter, spark plugs, etc. Some brand manufacturers may add additional maintenance items. The reason for this variation depends on the service life of car components. Some parts have a shorter lifespan and are prone to contamination, requiring frequent replacement, while others have a longer lifespan and longer replacement intervals. Specific details are as follows: 1. Under the harsh conditions of high temperature and high pressure inside the engine, the shelf life of engine oil is significantly shortened, its performance greatly declines, and it loses its protective effect on the engine. The replacement interval for mineral oil is approximately 5,000 kilometers, while for synthetic oil, it is about 10,000 kilometers. 2. To ensure the cleanliness of the oil circuit, the engine is equipped with an oil filter in the lubrication system to prevent impurities from mixing with the oil, causing oxidation and producing sludge that can clog the oil passages. The oil filter should be replaced at the same interval as the engine oil and must be changed simultaneously with the oil. 3. The air filter serves to block dust and particles inhaled by the engine during the intake process. If the filter is not cleaned for a long time, dust can enter the engine, causing abnormal wear on the cylinder walls. It is recommended to clean the air filter every 5,000 kilometers using an air gun to blow out the dust, and replace it every 10,000 kilometers. 4. Although gasoline quality is gradually improving, it may still contain some impurities and water. Therefore, gasoline must be filtered before entering the fuel pump to ensure smooth fuel flow. Since the fuel filter is disposable, it should be replaced every 10,000 kilometers.
2
0
Share

What is the legal age for obtaining a driver's license?

Generally speaking, you can get a driver's license at the age of 18 or above. However, different types of driver's licenses have different age requirements. According to Article 11 of the Regulations on the Application and Use of Motor Vehicle Driver's Licenses (Ministry of Public Security Order No. 71), the age of applicants for motor vehicle driver's licenses shall meet the following requirements: 1. For small cars, small automatic transmission cars, or light motorcycles, the applicant must be between 18 and 70 years old; 2. For low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the applicant must be between 18 and 60 years old; 3. For urban buses, medium-sized buses, large trucks, trolleybuses, or trams, the applicant must be between 21 and 50 years old; 4. For tractors, the applicant must be between 24 and 50 years old; 5. For large buses, the applicant must be between 26 and 50 years old.
13
4
Share

What is the difference between 5w40 and 0w40?

The differences between 5w40 and 0w40 are as follows: 1. Different working capabilities in low-temperature environments. 5W oil can ensure normal vehicle startup in temperatures as low as -30 degrees Celsius, while 0W oil can function normally at -35 degrees Celsius. 2. Different low-temperature fluidity. 0w40 has lower low-temperature fluidity compared to 5w40. The '0' indicates that the oil remains liquid at -40 degrees Celsius, and it will solidify below -40 degrees. The '5' means the oil stays liquid at -35 degrees Celsius and solidifies below -35 degrees. Here are some considerations for choosing engine oil: 1. When selecting oil, car owners should consider the highest and lowest temperatures in their local area, the vehicle's grade, and its condition. Using oil with excessively high viscosity will increase movement resistance and affect engine power. Conversely, oil with too low viscosity may not provide adequate lubrication, leading to increased engine wear. 2. For engines that are already significantly worn with larger component clearances, a higher viscosity grade oil can be chosen to enhance the sealing performance of the components.
4
1
Share

What to Do If License Plate Gets Bent?

If the license plate is slightly bent, you can straighten it by hand. However, if it is severely bent, you need to report it and replace it promptly. The motor vehicle license plate should remain clear and intact. You can bring the vehicle registration certificate, ID card, and the license plate to the vehicle management office to apply for a replacement. The new traffic regulations specify the following requirements for license plate installation: 1. Fixed license plate frames can be used, but the inner edge of the frame must be more than 5cm away from the edge of the license plate number. 2. The license plate frame must not display any logos, characters, decorative patterns, or obstruct the license plate. 3. When installing the license plate, special fasteners must be used. The fasteners must display the Chinese character representing the province, autonomous region, or municipality and the letter representing the issuing authority. 4. Each motor vehicle should be equipped with 8 new-style fasteners. 5. Unless restricted by the vehicle, all 4 mounting holes for the front and rear license plates must be fitted with fasteners.
9
2
Share

How to Determine When Carbon Brushes Need Replacement?

When carbon brushes exhibit the following symptoms, it indicates they need replacement: 1. Overheating, excessive noise, or breakage during operation; 2. Significant sparking during operation; 3. Contact surface between carbon brush and slip ring is less than 70%; 4. Improper single-brush pressure, etc. Below are the performance impacts of damaged carbon brushes: 1. Failure to replace them promptly may damage the rotor's copper segments, cause poor contact during operation, harm the coils, and reduce the machine's power output. 2. The machine may overheat, shortening its service life. Carbon brushes are devices that transfer energy or signals between the stationary and rotating parts of electric motors, generators, or other rotating machinery. When the motor rotates, they deliver electrical energy to the coils through the commutator.
12
0
Share

Should I Perform Maintenance When the Time is Due but the Mileage Hasn't Been Reached?

Vehicle maintenance should be performed when the time is due even if the mileage hasn't been reached. The first maintenance of a car refers to its initial service, which is generally recommended at 5,000 kilometers/6 months (with some exceptions). Many brand 4S dealerships, aiming to shorten customers' maintenance intervals, have adjusted this to remind customers to perform maintenance at 3,000 kilometers/3 months. The maintenance should be done based on whichever of these two values comes first. The regulations for the first maintenance of a new car are as follows: 1. The period from when a new car is driven until its first maintenance is called the break-in period. During this time, since the engine, transmission, and other gears are not fully broken in, it's generally advised not to drive too fast—definitely not exceeding 100 km/h, and preferably not exceeding 80 km/h. 2. During the break-in period, besides not exceeding 100 km/h, the engine speed should also not exceed 3,000 RPM. Avoid accelerating too aggressively, as poor engine break-in can lead to more issues later on and less fuel efficiency. 3. After a new car is driven, 4S dealerships usually require the owner to perform the first maintenance within 3,000 kilometers. In fact, car manufacturers require the first maintenance to be completed within 5,000 kilometers, so it's crucial not to exceed 5,000 kilometers before the first maintenance.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.