···
Log in / Register

What is the distance between 5 stakes for motorcycles?

3 Answers
VanHarley
07/29/25 10:32pm
In the two-wheeled motorcycle subject two slalom test, there are 5 stakes with a spacing of 2.3 meters and a stake length of 1.1 meters. 2.3 multiplied by 5 equals 11.5 meters. Therefore, the distance for five stakes is 11.5 meters. Passing score: For motorcycles, subject two and subject three are usually taken together at the test site, with a passing score of 80 points for both. Subject two is the slalom test (touching one stake deducts 10 points, hitting one stake deducts 20 points, and if any wheel runs over the edge line of the stake path, it results in failure). Motorcycle test requirements: Navigate through 5 stakes in an S-shape with a spacing of 2.5m. There is a little over 1m of white line on both sides. Crossing the line, hitting a stake, or stalling results in failure. After completing the slalom, circle around and navigate back through the stakes.
Was this review help?
3
2
Share
AdrianDella
08/15/25 11:30pm
When I first started learning to ride a motorcycle, the instructor took us to the training ground to practice the slalom test. There were five cones arranged in a row, with each spaced about 2.5 meters apart. This distance isn't particularly far, but it's quite challenging for beginners because you have to maintain a steady speed without knocking over the cones. I remember during my first attempt, I was always worried about not being able to control the bike properly, which led to frequent mistakes. Later, with more practice, starting slowly and gradually increasing speed, I finally got the hang of the rhythm. The instructor said this setup is designed to test steering ability and balance—too close and it's easy to knock them over, too far and there's no pressure, so 2.5 meters is just right to train reaction speed. For self-practice, it's recommended to mark the ground to simulate the cone positions. First, walk a few rounds without the bike to familiarize yourself with the path, then mount the bike and ride slowly around the cones, focusing on maintaining steady throttle and keeping your gaze forward. Safety comes first—if a cone is knocked over, stop and check it, don't rush to save time.
Was this review help?
6
5
Share
Expand All
LaLuke
10/18/25 3:33am
The guy teaching me to ride keeps talking about the motorcycle slalom test. The standard distance between the 5 cones is usually between 2.5 to 3 meters, depending on the driving school setup, but it's fixed at 2.5 meters in most places. Why this distance? It balances training difficulty and safety—too short increases collision risk, too long doesn't sharpen turning skills. When coaching beginners, I emphasize starting simple: ride slowly, don't stare at the cones but focus on the overall path; keep your body relaxed against the fuel tank, avoid stiffness. You can practice by setting up bottles as cones in an open space, using a tape measure for accurate spacing—always wear full protective gear. A few rounds and you'll get the hang of it; the key is practicing reactions and building confidence. Most importantly, don't rush—the test isn't timed, steady and safe completion matters most.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What Causes a Car to Feel Bumpy on Smooth Roads?

Car feels bumpy on smooth roads due to: 1. Corrosion or aging of the stabilizer bar bushings; 2. Damaged brake pads; 3. Malfunction in the connection between the suspension and shock absorbers; 4. Abnormal noise from wheel bearings; 5. Deformation of shock absorber springs; 6. Aging or wear of shock absorber pressure bearings. Solutions for a bumpy car on smooth roads include: 1. Clean the fuel system and check the idle speed motor for carbon buildup, clean promptly; 2. Check oil pressure and replace faulty components; 3. Replace brake discs in time; 4. Inspect or replace spark plugs; 5. Check the engine to identify problematic parts; 6. Clean the fuel filter.
1
5
Share

What is the working principle of an exhaust gas turbocharging system?

The working principle of an exhaust gas turbocharging system is to increase the intake air volume by compressing air, utilizing the inertial impulse of the exhaust gas discharged from the engine to drive the turbine in the turbine chamber. The turbine drives the coaxial impeller, which compresses the air delivered from the air filter pipe, pressurizing it into the cylinder. The maintenance methods for an exhaust gas turbocharging system are: 1. After starting the car engine, do not abruptly press the accelerator pedal; 2. Do not immediately turn off the engine after prolonged high-speed operation; 3. Choose the appropriate engine oil; 4. Regularly clean the engine oil and filter; 5. Clean the air filter on time; 6. Periodically check the sealing rings of the turbocharger; 7. Regularly clean the air filter; 8. Periodically inspect the lubrication oil pipes and joints.
9
2
Share

What are the steps to replace the battery in a Ford Mustang key?

The steps to replace the battery in a Ford Mustang key are: 1. There is a button on the back of the key. Press and hold the button to pull out the mechanical key inside; 2. After pulling out the mechanical key, you can see a small black switch. Press the switch to remove the old battery; 3. Take out the old battery and replace it with a new one. Taking the 2019 Mustang as an example, its front suspension is a MacPherson independent suspension, the rear suspension is a multi-link independent suspension, the body dimensions are: length 4555mm, width 1835mm, height 1715mm, wheelbase 2665mm, fuel tank capacity 60l, and curb weight 1545kg.
6
2
Share

Which country does Ferrari originate from?

Ferrari originates from Italy and is a manufacturer of world-class racing and sports cars, primarily producing Formula One racing cars, racing vehicles, and high-performance sports cars. Models under the Ferrari brand include: Ferrari 488, Ferrari 812, Ferrari 458, Ferrari LaFerrari, Ferrari F8, etc. Taking the 2020 Ferrari 812 as an example, its body structure is a two-door, two-seater hardtop convertible, with body dimensions of: length 4693mm, width 1971mm, height 1276mm, a wheelbase of 2720mm, a fuel tank capacity of 92 liters, and a luggage compartment capacity of 210 liters.
4
4
Share

How to remotely start the LaCrosse?

To remotely start the LaCrosse, follow these steps: 1. Press the lock button on the car key; 2. Hold down the 'C' button on the car key, and the car will automatically start. Remote start refers to starting the engine remotely using the key fob. When using this feature, owners should note the following: 1. The vehicle must be within a 50-meter range for the remote start to work; 2. After the vehicle is remotely started, it is advisable to open the door and wait a moment to allow stale air to circulate out. Taking the 2021 LaCrosse as an example, it is a mid-size sedan with the following dimensions: length 5026mm, width 1866mm, height 1459mm, wheelbase 2905mm, fuel tank capacity 55l, and curb weight 1535kg.
1
2
Share

What does Hill Descent Control (HDC) mean in cars?

Hill Descent Control (HDC) refers to a slope control system, which is an automatic control system designed for downhill driving. Its primary function is to maintain a low speed and ensure tire traction on steep downhill roads, allowing the vehicle to safely descend to level ground. When the HDC function is activated, it enables the driver to focus solely on steering without needing to press the brake pedal, ensuring a smooth descent on steep slopes. To use the HDC system: Before descending a steep slope, turn on the HDC switch. Then, release the accelerator and brake pedals, and the HDC system will automatically engage. The system will immediately deactivate if the brake or accelerator pedal is pressed.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.