What is the displacement of the Yamaha R6?

1 Answers
MicahFitz
07/29/25 9:20am
The displacement of the Yamaha R6 is 599cc, which belongs to the category of large-displacement motorcycles. The Yamaha R6 is a top-tier motorcycle produced by Yamaha Motor Company. In terms of body parameters, the Yamaha R6 has a length of 2040mm, width of 705mm, and height of 1095mm. The seat height is 850mm, the minimum ground clearance is 130mm, the wheelbase is 1375mm, the curb weight is 189kg, and the fuel tank capacity is 17 liters. Regarding the engine, the Yamaha R6 has an actual displacement of 599cc, featuring a four-cylinder, four-stroke configuration with four valve chambers and a DOHC valve train. The engine delivers a maximum power of 91kw and a maximum torque of 65.7nm, utilizing a liquid-cooled cooling system and electronic fuel injection for fuel delivery.
Was this review help?
17
0
Share
More Forum Discussions

Are Motorcycles Allowed on Fujian Highways?

According to Article 26 of Chapter IV (Traffic Safety Management) in the Fujian Expressway Regulations, motorcycles are not permitted on expressways in Fujian. Key considerations for urban motorcycle riding are as follows: Observe drivers' head movements and mirrors: A driver's head movements often precede turn signals or steering wheel actions. Monitoring these directly or through rearview mirrors helps predict their next move. Anticipate sudden braking or lane changes: Taxi drivers pose higher risks as they divert attention to spot passengers. Exercise extra caution when following taxis displaying "For Hire" signs. Mind vehicle blind spots: All vehicles have dangerous blind areas, particularly large vehicles like buses and concrete mixers with significantly limited visibility. Expressway driving precautions: Maintain consistent speed: After toll gates, use acceleration lanes to merge safely. Keep steady speed with adequate following distance (e.g., 100m gap at 100km/h). Stay in your lane: Avoid unnecessary lane changes, sudden braking, or prolonged use of passing lanes. Never overtake via emergency lanes. Prepare exits/merges 500m in advance. Execute decisive overtaking: Check rear traffic and passing lane conditions before overtaking. Use audible/visual signals when passing large vehicles, maintaining safe distance (50-100m) before returning. Nighttime vigilance: Use high beams when appropriate, watch for taillights, and avoid fatigue driving. Activate hazard lights during heavy fog. Adverse weather adaptation: Rain reduces visibility - halve speed, avoid puddles, double following distance, and refrain from sharp maneuvers. Emergency parking protocol: For breakdowns, signal early, park on shoulder/emergency lane, activate hazards, and place warning triangles 150m behind vehicle.
4
3
Share

Why does the Forte sell less than the Elantra?

In addition to its own reasons, it is also closely related to the enhanced strength of competitors and its own stagnation. The following is an introduction to the Forte: The Forte is a new generation global strategic model of Dongfeng Yueda Kia, officially launched in June 2009 and participated in the C-NCAP test. The Forte is equipped with dual front airbags and ISOFIX devices, with the front seat belts featuring pre-tensioning and force-limiting functions, and the driver's seat is equipped with a seat belt reminder. Overall, the Forte incorporates many design elements from the Koup concept car, using a large number of straight lines and folded edges to break away from the rounded and soft design style of previous Korean cars, fully reflecting the new design philosophy Peter Schreyer has infused into Kia models. It offers two interior color schemes: yellow-black and pure black. The light tones highlight a homely and warm style, while the darker tones better match the sporty characteristics emphasized by the Forte. Inside the car, a large number of chrome decorations and black high-gloss metallic paint are visible everywhere, and the layout of the dashboard is simple and reasonable, facilitating the driver's operation. Basic introduction: The Kia Forte is a new generation global strategic model, a masterpiece developed by Kia using cutting-edge technology, costing $200 million, and taking 29 months. The Forte is full of beauty and futuristic feel, with elongated integrated headlights, a dark grille, and clean body lines reflecting a simple and stylish design. The angular design at the junction of the hood and front wheel arches is also very prominent, complementing the muscular side profile and slightly raised waistline, giving it a poised and dynamic appearance. The coupe-style rear design echoes the overall sporty style of the car, highlighting a bold and sharp strong image. The Kia Forte belongs to its own series. The sunroof of the Forte is not particularly outstanding in terms of length or width, and the area is naturally relatively small. It has two standard opening modes: ventilation and full opening, and can be operated with one touch.
1
3
Share

Is the Vios produced by FAW or GAC?

Vios is a family sedan produced by FAW Toyota and launched in 2004. The Vios is an entry-level family model specifically designed and developed by Toyota for the Asian market. Based on the NBC platform, with an extended wheelbase, the Vios developed on a small car platform approaches the level of a compact sedan. The Vios is equipped with a domestically produced 16-valve 5A-FE engine, which is almost identical to the commonly used 8A engine in China, except for an increased piston stroke. The fuel tank capacity is 42 liters, and the displacement has been increased from 1.3 liters to 1.5 liters, with a corresponding maximum power output of 82kw. There are significant differences in configurations, with top-tier models featuring a DVD voice navigation system, while lower-end models cater to consumers with varying budget levels. The new Vios comes in six different models, equipped with a 1.5L 112-horsepower 5NR-FE engine. The body dimensions are 4435*1700*1490 (mm), with a front MacPherson independent suspension and a rear torsion beam non-independent suspension. The ground clearance also reaches 160mm.
12
2
Share

Where is the tire pressure monitoring location on the Focus?

The tire pressure monitoring on the Focus needs to be activated by reprogramming the vehicle's onboard computer. Once activated, the tire pressure icon on the dashboard will light up during the key-on self-test and will also illuminate if there is an issue with the tires. Common tire pressure monitoring methods: Direct tire pressure monitoring uses wireless transmitters to send pressure information from inside the tires to a central receiver module, which then displays the tire pressure data for each tire. Indirect tire pressure monitoring compares the rotational speed differences between tires to monitor tire pressure. The Tire Pressure Monitoring System (TPMS) combines direct sensors installed in two diagonally opposite tires with an indirect system for all four wheels. Daily tire pressure considerations: Most vehicles are equipped with a tire pressure monitoring system that alerts drivers to tire leaks and abnormal tire pressure to ensure driving safety. It's important to regularly check the tire pressure monitoring light on the dashboard, as both underinflation and overinflation can affect driving performance and increase tire wear.
18
2
Share

How to Open the Hood of a Santana?

The method to open the hood of a Santana is as follows: The hood release handle is located in the driver's side footwell. Pull the handle to open the hood. The hood serves to insulate noise, block dust, and protect the engine. After opening the hood, use the support rod to prop it up. The benefits of cleaning the engine are as follows: 1. Clean oil passage sludge: The engine block is filled with oil passages, and over time, sludge and other deposits may accumulate inside these passages. Engine cleaners can remove and clear these sludge impurities from the oil passages, ensuring the proper functioning of the engine's lubrication system. 2. Clean piston ring carbon deposits: When the engine cleaner is added to the oil, it cleans the residual carbon deposits from the piston rings and ring grooves as the oil spreads on the cylinder walls. 3. Maintain the engine: By removing sludge, carbon deposits, and other substances that affect the engine's normal operation, the engine's performance can be improved, and its service life can be extended.
20
2
Share

What is the appropriate tire pressure for Nissan Qashqai?

The recommended tire pressure for Nissan Qashqai is between 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be increased by 0.2 bar in winter and decreased by 0.1 bar in summer. The tire pressure of the new Nissan Qashqai can be viewed on the dashboard display. Press the menu button on the left side of the steering wheel to switch to the tire pressure page, but it requires a period of normal driving before the tire pressure is displayed. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no seal on top and four small spikes at the bottom, with an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. The tire pressure monitoring system has not been reset. After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator light to come on. Simply reset the tire pressure to resolve this issue. The tire pressure sensor is damaged. The tire pressure sensor, which is used to monitor tire pressure, is installed directly inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new one.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.