What is the displacement of the Volkswagen Magotan 330TSI?

1 Answers
GabriellaLee
07/29/25 3:29pm
The displacement of the Volkswagen Magotan 330TSI is 2.0 liters. It is equipped with an inline 4-cylinder turbocharged engine, with a maximum power of 137 kilowatts and a maximum power speed range of 4,100 to 6,000 revolutions per minute. The maximum torque is 320 Newton-meters, with a maximum torque speed range of 1,500 to 4,000 revolutions per minute. It is paired with a 7-speed dual-clutch transmission. The Volkswagen Magotan 330TSI is a mid-size sedan with a body structure of 4 doors and 5 seats. Its body dimensions are: length 4,865 millimeters, width 1,832 millimeters, height 1,471 millimeters, with a wheelbase of 2,871 millimeters. The fuel tank capacity is 66 liters, and the curb weight is 1,540 kilograms.
Was this review help?
13
1
Share
More Forum Discussions

Where is the OBD port on the Nissan Sylphy?

Behind the plastic cover under the steering wheel, you need to use a flat-head screwdriver to pry open the cover to see the OBD interface. More details are as follows: 1. The full English name of OBD is On-Board Diagnostics, and the Chinese meaning of OBD is the on-board self-diagnosis system. The location of the OBD interface may vary for different types of cars, which depends on the specific model. 2. The self-diagnosis system is mainly used to monitor the operating conditions of the engine. During operation, the engine consumes fuel, and the burned fuel produces exhaust. The on-board self-diagnosis system constantly monitors whether the vehicle's exhaust emissions exceed the standard. If the vehicle's exhaust emissions exceed the standard, the OBD warning light will immediately illuminate to alert the driver. This is also a safety feature of the car. 3. When there is a problem with the vehicle's operating conditions, while issuing an alert, the OBD system will store the fault information in the memory, making it convenient for maintenance personnel to diagnose the issues with the vehicle.
4
4
Share

Does the Buick Excelle have front and rear anti-collision beams?

The Buick Excelle is equipped with both front and rear anti-collision beams, which serve as the first line of defense in passive safety. These beams are crucial safety devices designed to absorb and mitigate external impact forces, protecting the front and rear sections of the vehicle body. Here is an introduction to the anti-collision beams: 1. The anti-collision beam is a device used to reduce the impact energy during a collision. It consists of a main beam, an energy-absorbing box, and mounting plates that connect to the vehicle. Both the main beam and the energy-absorbing box effectively absorb collision energy during low-speed impacts, minimizing damage to the vehicle's longitudinal beams and thereby protecting the vehicle. 2. The front anti-collision beam in the new Excelle provides an effective protection area of up to 90%, covering most of the front section of the vehicle. It is made of aluminum alloy, a material rarely seen in vehicles of the same class. Compared to steel, the primary advantage of aluminum alloy is its ability to reduce the vehicle's weight by one-third while maintaining the same strength. This is currently the most common method for vehicle lightweighting, thereby improving the overall mechanical performance of the vehicle.
12
3
Share

Does the Mustang have a 4WD model?

The Ford Mustang does not have four-wheel drive; the Mustang is a front-engine, rear-wheel-drive car. Below is an introduction to the Ford Mustang: 1. The Mustang uses two engines in total, one is a 2.3-liter turbocharged engine, and the other is a 5.0-liter V8 naturally aspirated engine. The transmission paired with these engines is a 10-speed automatic transmission. 2. Taking the 2.3-liter turbocharged engine as an example, it delivers 299 horsepower and a maximum torque of 434 Nm. This engine can output its maximum power at 5,600 rpm and its maximum torque at 3,000 rpm. 3. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
3
2
Share

What is the use of cruise control function?

Cruise control allows drivers to maintain a stable speed without stepping on the accelerator, greatly alleviating leg and waist fatigue during long-distance driving and reducing the likelihood of accidents. The following is a related introduction to cruise control: 1. Activation method: First, ensure the vehicle speed is above 40 km/h, then press the ON/OFF button (the middle one) to activate this function. Note that activating this function does not mean cruise control is engaged. You also need to press the topmost of the three buttons for the cruise function to truly activate. 2. Cruise control system operation process: Cruise control is used to maintain a constant speed for the vehicle. Once the car is set to cruise mode, the engine's fuel supply is controlled by the computer. The computer continuously adjusts the fuel supply based on road conditions and the vehicle's driving resistance to keep the car moving at the set speed without the need to operate the accelerator.
20
2
Share

What does the 17-digit VIN represent?

Vehicle Identification Number (VIN) consists of 17 digits and letters, divided into six main sections. Extended information: 1、Section 1: 3 codes represent the country of manufacture, manufacturer, and vehicle type, identified by numbers or letters (positions 1~3). 2、Section 2: 5 codes indicate vehicle characteristics, defined by manufacturers—refer to manuals for details (positions 4~8). 3、Section 3: Check digit, represented by a letter or number, determined by manufacturers (position 9). 4、Section 4: Model year code, using letters/numbers per international standards (position 10). 5、Section 5: Assembly plant and location code, assigned by manufacturers (position 11). 6、Section 6: Serial number, manufacturer-defined (positions 12~17).
19
4
Share

What is the emission standard for the 2012 Focus?

2012 Focus meets the China IV emission standard. Below are specific details about the Focus emission standards: 1. Emission standard by year: The China IV standard was implemented starting in 2011, so the 2012 Focus complies with the China IV standard. A car's emission standard can be determined by its production year. Cars produced before 2011 generally meet the China III standard, while those produced after 2011 mostly comply with China IV and China V standards. Cars produced in 2019 may meet either China V or China VI standards. 2. Methods to check the emission standard: Look for the vehicle's environmental protection label, which has a clear mark on the back. You can also check on professional inquiry websites. For new cars, refer to the vehicle's factory certificate. Alternatively, take the vehicle's registration certificate to the relevant authorities for verification.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.