What is the displacement of the Trumpchi GS4 200T?

1 Answers
BrantleyLynn
07/29/25 6:03pm
The displacement is 1.5L. Below is the relevant introduction of the Trumpchi GS4: 1. Exterior: It adopts the latest "Lingyun Wing 3.0" design language, enhancing the visual impact of the Trumpchi family's signature Lingyun Wing front face. The front grille integrates with the headlights, making the new car appear more imposing and distinctive. The headlights feature a dual-module LED light core design, complemented by a diamond-array turn signal, creating a dual-star cruising effect when lit, full of dynamic and technological appeal. 2. Space: It not only has a wheelbase of 2680 mm but also boasts the widest interior space in its class. Coupled with the over-level flat rear floor, every passenger can enjoy spacious luxury.
Was this review help?
7
2
Share
More Forum Discussions

How often should the coolant be replaced in a new Santana?

The new Santana requires the coolant to be replaced every 45,000 kilometers or every 60 months. The method for replacing the coolant is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a particular focus on the five-way water pipe. The coolant flows through the five-way pipe and is then distributed to different parts of the car to function. If there is any leakage of coolant in this section, replace the water pipe or re-secure the connection as needed. Drain the old coolant and then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue to pour water into the reservoir, allowing it to flow continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will be slightly pinkish; continue adding clean water until the water coming out is clear. Note: Do not forget to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose. Then, add another container of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as some air is expelled from the cooling system. Add more coolant until the reservoir reaches the maximum mark "MAXT."
8
3
Share

What are the types of joint venture cars?

Top 5 joint venture cars in terms of quality: 1. Nissan Sylphy: As one of Nissan's earlier models, the Sylphy has stood the test of time and remains a top seller. Its leading position in sales is largely due to its quality and reputation. Although the three major components—engine, transmission, and chassis—are somewhat outdated, they are still reliable, making the Sylphy one of the best joint venture cars in terms of these components. 2. Volkswagen Lavida: The Lavida is considered a 'god car' and is often referred to as a 'China special' due to its frequent appearance at the top of sales charts. In terms of the three major components, the 1.2T turbocharged model achieves a real-world fuel consumption of 6.8L per 100 km, while the 1.6L naturally aspirated model consumes just 7L per 100 km. The naturally aspirated model offers excellent smoothness, and its transmission and chassis are also top-notch, with a comfortable ride. 3. Toyota Corolla: Nissan's core engine technology lies in its engines. As a joint venture brand, the Toyota Corolla offers different engine options—1.2T, 1.6L, and 1.8L—positioned as a family sedan. The legendary 1GR-FE engine is known for its durability, requiring no major repairs even after hundreds of thousands of kilometers, while maintaining stability and fuel efficiency. The transmission and chassis incorporate Nissan's technology, earning the Corolla recognition for its quality and reputation. 4. Volkswagen Jetta: Many driving schools and test centers use the Volkswagen Jetta due to its durability and reliability. It's often said that a Jetta can run for 15 years with minimal issues. While its design is understated and conservative, its reliable quality earns it the fourth spot on this list, also recognized as one of the best joint venture cars in terms of the three major components. 5. Volkswagen Sagitar: The Sagitar, produced by FAW-Volkswagen, is as well-known in China as the Passat and serves as a 'pillar' of Volkswagen's sales. With the retirement of the older model, the new Sagitar adopts the MQB platform, targeting the compact car segment with a fresh design language and richer configurations, while inheriting the quality genes of its predecessor.
6
4
Share

Will I Get Penalty Points for Making a U-Turn at a Pedestrian Crossing with Traffic Lights?

Making a U-turn at a pedestrian crossing will result in penalty points as it is a traffic violation. According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," offenders will be penalized with 3 penalty points and a fine of 200 yuan. This is based on Article 49, which states that motor vehicles are not allowed to make U-turns at locations with no U-turn or no left-turn signs or markings, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or other dangerous sections of the road. Definition of yielding to pedestrians at crossings: Pedestrians walking on the right side of the road's pedestrian crossing, not reaching the centerline of the road. Vehicles on the left side of the road should slow down and proceed only when it is safe to do so, allowing pedestrians to cross. Pedestrians waiting outside the boundary line of the motorized and non-motorized lanes. If they have not entered the roadway, vehicles should slow down and proceed only when it is safe to do so. When pedestrians cross the dividing line between motorized and non-motorized lanes, vehicles that do not stop and yield are committing a violation and should be penalized. After pedestrians enter the motorized lane along the pedestrian crossing, motor vehicles should slow down and proceed only when it is safe to do so. Vehicles that do not stop and yield are committing a violation and should be penalized. Pedestrians waiting at the centerline of the road without entering the motorized lane. Vehicles that do not stop and yield are committing a violation and should be penalized. Pedestrians crossing the centerline of the road and entering the lane. Vehicles that do not stop and yield are committing a violation and should be penalized. When the road is divided by a green belt in the middle, and pedestrians are waiting in the central stopping area, vehicles must slow down and proceed only when it is safe to do so. Permissible U-turn situations: Intersections with U-turn signs: If there is a clear U-turn sign at an intersection, U-turns are allowed. If there is a U-turn traffic light, follow the signal. If there is no signal, make the U-turn based on the specific situation without obstructing other vehicles or pedestrians. Intersections without explicit no U-turn or no left-turn signs: If there are no signs explicitly prohibiting U-turns, then U-turns are allowed. "No explicit prohibition" means the absence of "no U-turn" or "no left-turn" signs, and the centerline is not solid. In such cases, U-turns are permitted. Yellow grid lines also allow U-turns: Yellow grid lines are no-stopping zones marked at intersections prone to congestion due to temporary stops, important unit entrances, and other necessary locations. Stopping on these lines (including waiting for traffic lights) is a violation. Although stopping is prohibited in yellow grid zones, U-turns are allowed unless there is a central barrier. Yellow grid lines without barriers are equivalent to "U-turn permitted." Intersections with U-turn traffic lights: This is straightforward—if there is a U-turn signal, follow it. Only proceed on green. When no left-turn and U-turn permitted signs appear together: U-turns are allowed, but left turns are prohibited. Note that "no U-turn" is not the same as "no left-turn." Precautions when making U-turns at intersections: Observe road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable location. If there is a "no left-turn" sign, even without a "no U-turn" sign, U-turns are not allowed at that intersection, as U-turns inherently involve left turns. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, U-turns are not permitted at that intersection. Always yield to through traffic when making a U-turn. Proceed only if it does not interfere with the normal flow of through vehicles; otherwise, you will bear full responsibility for any accidents. Near intersection stop lines, lanes usually have guiding arrows for vehicle direction. The leftmost lane does not always have a left-turn arrow. If it has a straight arrow, even without explicit "no U-turn" signs, U-turns are not allowed.
4
4
Share

Is the Subaru BRZ a Four-Wheel Drive Vehicle?

According to the official introduction from Subaru, the Subaru BRZ adopts a front-engine, rear-wheel-drive system, so it is not a four-wheel-drive vehicle. Generally speaking, due to the higher cost of four-wheel-drive systems, they are usually equipped on off-road vehicles or high-performance cars. Compared to two-wheel-drive systems, vehicles equipped with four-wheel-drive systems are more stable during high-speed driving and have better off-road capabilities in complex road conditions, improving the stability of the vehicle to a certain extent. Below is a brief introduction to the Subaru BRZ: 1. The Subaru BRZ is a hardtop sports car produced by Subaru. The Subaru BRZ is equipped with a naturally aspirated engine with a displacement of 2.0 liters, coded FA20, and the transmission options include a 6-speed manual and a 6-speed automatic. 2. The new BRZ is the result of a collaboration between Subaru and Toyota, serving as the sister car to the Toyota 86 (Note: the North American version is called Scion-FR-S, the European version is GT86, and the Japanese version is called 86). The car features a horizontally opposed engine and a front-engine, rear-wheel-drive layout. The suspension setup includes a front MacPherson strut independent suspension and a rear double-wishbone suspension. The wheelbase reaches 2570mm, with a vehicle length of 4239mm, width of 1775mm, and height of 1285mm.
11
5
Share

How to Replace Engine Oil and Oil Filter for Chery A3?

Method for replacing engine oil and oil filter for Chery A3: 1. Open the engine hood and unscrew the oil filler cap. 2. Use a Phillips screwdriver to remove the three screws on the air filter housing, then take out the air filter element. Replace it if it's too dirty; if not too dirty, it can be reused and replaced next time. 3. Start the vehicle and check for oil leaks around the drain screw and oil filter element. After confirming there are no leaks, clean the vehicle to complete the maintenance. Introduction to Chery A3: 1. Interior: Utilizes various new color elements, emphasizing a noble, elegant, and comfortable family atmosphere. 2. Powertrain: Can be equipped with Chery's 1.6L, 1.8L, 2.0L engines, paired with a continuously variable transmission (CVT) or a five-speed manual transmission, offering strong power and easy, comfortable handling.
11
1
Share

What Causes the Tire Pressure Warning in the Tiguan?

When the tire pressure warning appears in the Volkswagen Tiguan, it is due to abnormal tire pressure conditions. This usually occurs when the tire is underinflated because of slow air leakage or a puncture, or when the tire pressure is too high. It is recommended that the owner visit a nearby repair shop to identify the cause and take appropriate measures. Additional information: 1. There are currently 4 models of the Tiguan available for sale, featuring 2 engine displacements—1.4T and 1.8T—and 2 transmission options: dual-clutch and automatic. The engine has a maximum power output of 118kW, a maximum horsepower of 160PS, and a maximum torque of 250N·m. 2. All current Tiguan models come standard with a tire pressure monitoring system. Each tire is equipped with a highly sensitive sensor transmitter that monitors tire pressure and temperature in real time, wirelessly transmitting data signals to the onboard terminal receiver system. If abnormalities such as air leakage, excessively high or low tire pressure, or excessively high temperature are detected, the terminal will automatically issue an alarm and display the tire status to ensure driving safety.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.