What is the displacement of the Porsche 718?

Where is the throttle located?

In manual transmission cars, from left to right, they are the clutch, brake, and throttle, while in automatic transmission cars, the brake is on the left and the throttle is on the right, so the throttle is located on the right. Below is an introduction to the throttle: 1. Throttle introduction: The throttle, also known as the accelerator or throttle valve, is a control device that regulates the engine's power (thrust). In piston aircraft engines, the throttle controls the opening of the carburetor's throttle valve to regulate the cylinder's filling amount, thereby determining the engine's output power. In gas turbine engines, the throttle controls the metered fuel flow of the fuel regulator, thus determining the thrust produced by the engine. 2. Usage: In manual transmission cars, the left foot is only responsible for pressing the clutch pedal, while the throttle pedal and brake pedal are both controlled by the right foot. In automatic transmission cars, the left foot is not used, and only the right foot controls the brake pedal and throttle pedal.

6

3

Share

What is the time limit for the Subject 1 exam?

The exam has a time limit of 45 minutes. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the Subject 1 exam can be taken twice on the same day. If the first attempt is unsuccessful, a free second attempt is allowed. If the second attempt also fails, the Subject 1 exam is terminated, and the candidate must wait ten days before rescheduling. Subject 1, also known as the theoretical exam or driver's theory exam, is part of the motor vehicle driver's license assessment. The exam content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The exam is conducted on a computer. The Subject 1 exam consists of 100 questions, divided into single-choice and true/false questions, each worth 1 point, totaling 100 points. If a candidate answers 11 questions incorrectly, the system will automatically submit the exam and end the test. Subject 1 exam content: Regulations on driver's licenses and motor vehicle management; Road traffic conditions and regulations; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; Specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: Candidates should dress appropriately for the exam; no slippers are allowed. Electronic devices and bags are prohibited in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal items in a locker before entering the exam room. Upon entering, the identity verification desk will assign a seat. After finding your seat, begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it. Failure to sign renders the result invalid. There is no limit to the number of times you can schedule the Subject 1 exam. Each subject can be taken once, with one retake allowed if the first attempt is unsuccessful. If the retake is also unsuccessful, the exam is terminated, and the applicant must reschedule. For Subject 2 and Subject 3, only five exam attempts are allowed, and rescheduling must occur ten days later. If the Subject 3 safe driving knowledge exam is unsuccessful, the passed road driving skills exam results remain valid. There are three subjects in the driver's license exam: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge exam. Subject 2 refers to the field driving skills exam. Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge exam is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include "Subject 4."

16

3

Share

What is the situation when the gear of Audi A6 cannot be engaged?

Generally, it is caused by incorrect positioning or damage of the gear switch, which can lock the gear lever. Most vehicles have a lock release switch, but it will limit the engine's power transmission and gear engagement. The method of using the gears in Audi A6 is: 1. D is the drive gear: Step on the brake, press the button on the side of the gear lever and push it downward; 2. P is the parking gear: Press and hold the P button on the gear lever. The Audi A6 is equipped with a 2.0T turbocharged engine, with a maximum power of 140 kilowatts, a maximum power speed of 5000 to 6400 revolutions per minute, a maximum torque of 320 Newton meters, and is paired with a 7-speed dual-clutch transmission.

14

2

Share

What do PRNDL stand for in a car?

The P gear in a car is the parking gear, R gear is the reverse gear, N gear is the neutral gear, D gear is the drive gear, and L gear is the low gear. It is necessary to switch to the correct gear according to the driving state to enable the car to transition to the desired driving state. Here is a detailed introduction: 1. P (Parking) gear: P is used for parking, which uses a mechanical device to lock the rotating part of the car, preventing the car from moving. When parking, the gear lever must be moved to the P position, thereby locking the output shaft through the parking brake device inside the transmission and tightening the hand brake to prevent the car from moving. 2. R (Reverse) gear: R is used when reversing. Usually, you need to press the safety button on the lever to move the lever to the "R" gear. It should be noted that when the vehicle has not completely stopped, you must not forcibly switch to the "R" gear, otherwise the transmission will be severely damaged. 3. N (Neutral) gear: The N gear refers to the neutral gear, which can be used when starting, towing, or temporarily stopping (such as at a red light). To prevent the vehicle from rolling on a slope, you must step on the brake when in neutral. 4. D (Drive) gear, also known as the driving gear: In this gear, the transmission will automatically switch between 1 and overdrive gears (equivalent to 1 to 4 gears) based on speed and throttle conditions. This gear is used for general road driving. 5. S gear: S stands for sport mode. In this gear, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high speed for a longer time, thereby increasing the vehicle's power. 6. L (Low) gear: The L gear is also a low forward gear. When going downhill or on a long downhill slope, placing the gear here can limit the car's gear to automatically stay in the lowest gear, allowing the car to use the engine's power for braking when going downhill.

10

3

Share

What is the actual fuel consumption of the Leopaard Qibing 2.2?

Leopaard Qibing 2.2 has a fuel consumption of 10.7L per 100km. Factors affecting fuel consumption: Poor driving habits: Squeezing into gaps, sudden stops and starts, driving at high speeds in low gears, and other habits can increase fuel consumption. Engine carbon buildup: Carbon buildup in the engine can also lead to higher fuel consumption. Low tire pressure: Insufficient tire pressure and underinflated tires can also increase fuel consumption. Heavy trunk: Carrying too many items in the trunk can also increase fuel consumption. Regularly clean out unnecessary items from the trunk to reduce fuel consumption. Methods to reduce fuel consumption: Try to maintain a steady speed while driving. Avoid sudden acceleration, and perform regular vehicle maintenance.

1

2

Share

What is the difference between a full-frame subframe and a non-full-frame subframe?

Full-frame subframe and non-full-frame subframe differ as follows: 1. Full-frame subframe: It has many advantages. Due to its larger size, it can accommodate a more robust suspension and support a more powerful engine. It covers the entire engine compartment, providing better cabin rigidity when connected to the body. It allows for more layout flexibility in the engine compartment. By optimizing its side rails, it can better control the engine's sinking trajectory and absorb some collision energy. Since the entire engine bottom is enclosed within it, as long as the ground clearance is designed to be lower than that of the powertrain, it can effectively protect the powertrain. 2. Subframe: This refers to the full-frame subframe. The subframe can be seen as the skeleton of the front and rear axles and is a component of them. The subframe is not a complete frame but rather a bracket that supports the front and rear axles and suspension, connecting them to the "main frame," hence it is commonly referred to as a "subframe."

3

1

Share

What is the displacement of the Porsche 718?

Where is the throttle located?

What is the time limit for the Subject 1 exam?

What is the situation when the gear of Audi A6 cannot be engaged?

What do PRNDL stand for in a car?

What is the actual fuel consumption of the Leopaard Qibing 2.2?

What is the difference between a full-frame subframe and a non-full-frame subframe?

How to Reset the Beetle Maintenance Light?

Will points be deducted for failing to yield to pedestrians when turning left?

What are the symptoms of a faulty front oxygen sensor in the Lavida?

What is the fuel consumption of the Audi Q5L?