What is the displacement of the Nissan GTR?

1 Answers
DiStephanie
07/29/25 6:17pm
Nissan GTR is a sports car under the Nissan brand, equipped with a 3.8-liter twin-turbocharged engine, so the displacement of this car is 3.8 liters. Here are the relevant details: 1. The Nissan GTR is powered by a 3.8-liter twin-turbocharged V6 engine, delivering 555 horsepower and a maximum torque of 632 Nm. This engine reaches its peak power at 6,800 rpm, with maximum torque available between 3,300 and 5,800 rpm. The engine features a continuous variable valve timing system and utilizes an aluminum alloy cylinder head and block. 2. The dual-clutch transmission is highly suitable for performance vehicles, offering high transmission efficiency and rapid gear shifts. 3. The Nissan GTR employs a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The double-wishbone suspension is a structurally complex system with two wishbones and a connecting link between them. This suspension design helps reduce body roll, minimizes brake dive, and enhances the vehicle's handling performance.
Was this review help?
1
1
Share
More Forum Discussions

Can Blocking the Exhaust Pipe Cause the Engine to Stall?

Blocking the exhaust pipe will cause the engine to stall. Reason for stalling: Combustion requires a mixture of fuel and air to form a combustible mixture. After each combustion, the exhaust gases are expelled through the exhaust pipe. If the exhaust pipe is blocked, the exhaust gases cannot be expelled from the vehicle, and at the same time, new combustible mixture cannot enter, causing the engine to stall and the vehicle to stop starting. Ignition method: When the engine starts, the mixture of air and gasoline is atomized (in a ratio of 14.7:1) and enters the cylinder. The piston, driven by the motor, compresses the mixture. The spark plug then ignites the mixture, causing an explosion that drives the engine to operate.
3
0
Share

Should You Press the Clutch or Brake First in a Manual Transmission Car?

Whether to press the clutch or brake first in a manual transmission car depends on the situation. Press the brake first: If the car is moving too fast when braking, press the brake first and then the clutch. When the car is moving too fast, the brake can effectively stop the car. The speed will decrease quickly due to braking, and then pressing the clutch will result in a better stopping effect. Press the clutch first: If the car is moving slowly, press the clutch first and then the brake. When the car is moving slowly, pressing the clutch can basically stop the car. If the car is moving very slowly, pressing the brake rashly may cause the car to stall directly, which can cause great damage to the car.
15
0
Share

Where is the rear panel of a car located?

The rear panel of a sedan is the rear barrier of the trunk. Overview of the rear panel: The rear panel is a body covering component. Replacing it won't cause significant depreciation. The rear panel is composed of several combined parts, not a single piece. Damage to the rear panel: Deformation of the rear panel has minimal impact on the vehicle; the car's handling and other performance aspects are largely unaffected. If the rear panel is damaged, it's best to repair it with sheet metal work if possible, and avoid cutting it at all costs. Once cut, the car is considered an accident vehicle. If it's an accident vehicle, the repaired strength will be significantly reduced, and the resale value will depreciate considerably.
4
3
Share

How many seconds should you not exceed when starting a car?

Car starting time should not exceed 5 seconds. Normal starting time: The normal starting time for a car is 1 to 4 seconds. The starting time of a car should not exceed five seconds. If it exceeds this time or you clearly feel the car is struggling to start, it indicates that the battery can no longer provide sufficient power for the car's startup. The interval between two starts should not be less than 15 seconds, as starting too frequently can burn out the battery. Reasons why a car cannot start: Insufficient battery power will cause the car to fail to start. After ruling out battery issues, you can also check the cables to see if they are loose or corroded. If it's a problem with poor wire connection, simply tightening the cables will suffice.
3
3
Share

What should be noted when replacing the battery of a Mercedes GLE400?

For Mercedes-Benz series models, when replacing the battery, unlike other German cars that require matching, as long as the battery model and ampere-hour rating match, no matching is needed. It is important to note that when installing the battery, the positive and negative terminals must not be reversed. What should be noted when replacing the battery? 1. When replacing the battery, it is necessary to replace it with an AGM battery of the same specifications as the original. If a general battery is replaced, due to different specifications, the engine module may judge the supply voltage as too low, resulting in the inability to eliminate the fault indicator light. (1) If replacing with the power disconnected, first take the key out of the car and wait for 5 minutes to allow the vehicle to enter sleep mode before replacing. (2) If replacing without disconnecting the power, be careful not to let the positive terminal touch the car body during the replacement process, as this may cause other phenomena such as module fault indicators. 2. When connecting the battery terminals, connect the positive terminal first, then the negative terminal. After installation, anti-rust protective agent or acid-free grease can be sprayed on the battery terminals for protection. When the Mercedes ammeter pointer shows insufficient battery charge, it should be charged in time. The battery charge of the Mercedes E-Class can be reflected on the dashboard. Sometimes, if you find the charge is insufficient on the road and the engine stalls and cannot be started, as a temporary measure, you can seek help from other vehicles, using their vehicle's battery to start the vehicle by connecting the negative terminal to the negative terminal and the positive terminal to the positive terminal.
20
3
Share

What Causes Unstable Engine Idle When Turning the Steering Wheel While Stationary?

Here are the detailed explanations for the causes of unstable engine idle when turning the steering wheel while stationary: Unstable Oil Pressure: If the fuel pump's supply pressure is abnormal or the intake pressure sensor's readings are incorrect and malfunctioning, it can cause vehicle shaking. The solution is to check the oil pressure and replace components if necessary. Ignition System Issues: If there is a malfunction in the car's ignition system, it can lead to poor ignition system performance, inadequate spark plug firing, and other issues, resulting in unstable engine idle. The solution is to inspect the condition of the spark plugs, high-voltage wires, and ignition coils, checking for excessive carbon buildup on the spark plugs. If found, clean or replace the spark plugs immediately.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.