What is the displacement of the Mercedes-Benz GLS?

3 Answers
HoldenRose
07/29/25 2:59pm
Mercedes-Benz GLS is equipped with a 3.0-liter turbocharged engine across the entire lineup, so the displacement of this vehicle is 3.0 liters. Below is relevant information about the Mercedes-Benz GLS: 1. The 3.0-liter turbocharged engine in the Mercedes-Benz GLS has a maximum power output of 270 kW, a maximum torque of 500 Nm, a maximum power speed of 6400 rpm, and a maximum torque range of 1600 to 4500 rpm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with a 9-speed automatic transmission (9AT). The 9AT is a relatively comfortable transmission, known for its excellent shift smoothness, which enhances both the comfort and driving quality of the vehicle. 2. The Mercedes-Benz GLS also boasts a highly sophisticated chassis. Both the front and rear suspensions of this vehicle employ double-wishbone independent suspensions, which significantly improve the car's handling and comfort. The double-wishbone suspension can absorb more impacts.
Was this review help?
11
0
Share
OThomas
08/13/25 7:36am
I drive a Mercedes-Benz GLS 450 daily for commuting, equipped with a 3.0-liter inline-six turbocharged engine. It runs smoothly in the city with quick acceleration, and the fuel consumption is around 13-15 liters per 100 km. On the highway, it drops to about 9 liters, and the power is sufficient for overtaking without hesitation. Compared to the 4.0-liter AMG version, the smaller displacement means less maintenance hassle and lower insurance costs. Choosing the right car based on usage scenarios is crucial; if you frequently drive long distances or on mountain roads, a larger displacement engine will be more powerful, but fuel consumption can rise to 16-18 liters. The Mercedes-Benz GLS typically ranges from 3.0 liters to 4.0 liters in displacement, with models like the GLS 580 offering a more thrilling drive. However, based on my experience, a 3.0-liter engine is more than enough for family use, and there's no need to chase extreme performance at extra cost. In short, displacement directly affects driving comfort and your wallet, so it's best to choose based on personal habits.
Was this review help?
2
0
Share
Expand All
HenryFitz
10/11/25 5:49am
I've been researching Mercedes-Benz vehicles for years. The GLS typically has a displacement ranging from 3.0L to 4.0L, depending on the model. For example, the GLS 450 features a 3.0L turbocharged inline-six engine with 367 horsepower, making it perfect for city driving. Stepping up to the GLS 580 brings a 4.0L V8, boosting power to 483 horsepower for exceptional highway performance. Larger displacement engines tend to be quieter but consume more fuel, and maintenance costs are slightly higher due to increased oil capacity. Compared to older models, the current GLS incorporates hybrid technology, improving energy efficiency without changing displacement—hybrid power compensates for low-speed torque. In real-world driving, the 3.0L suits commuters, while the 4.0L is ideal for speed enthusiasts. When choosing a GLS, always check local emissions regulations, as higher-displacement models may incur greater taxes. Displacement is just the starting point—personal preferences and budget should ultimately guide your decision.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

What is the internal structure of a car fuel tank?

The fuel tank consists of two welded components and is stamped from lead steel. Inside the tank, there is a diaphragm to prevent fuel splashing and increase structural rigidity, which also prevents gasoline from rubbing against each other and causing combustion. The maintenance of the fuel tank is as follows: Drain accumulated water and sediment from the tank, and check for oil leaks at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and steam valves, also check if their ventilation holes are clear. The filter screen at the fuel filler port should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket of the fuel filler cap should also be intact to prevent fuel from overflowing while driving. If the owner wants to know the remaining fuel level in the tank, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is close to E, it indicates that the tank is almost empty, and when it is near F, it means the fuel level is sufficient.
3
4
Share

What brand are the original tires of the Volkswagen 2017 Lavida?

2017 Lavida uses Hankook OPTIMO-k415 tires. The tire size is 205/55-R16. Below are relevant details: 1. As the original tire brand for the new Lavida, Hankook tires are known for their durability and high cost-performance ratio, making them well-suited for the Lavida's positioning as a family sedan. 2. The interior features the authentic Volkswagen family-style design. The dashboard includes a screen at the top, air vents below it, and Volkswagen's iconic air conditioning control buttons further down. The area behind the gear lever has a more spacious design due to the absence of a mechanical handbrake, freeing up additional space and giving a more stable appearance. The dashboard design is distinctive, with a glossy black decorative panel in front of the passenger seat that elegantly connects to the central screen, creating a very tidy look. The air vents have been moved below the screen for better usability. 3. The Volkswagen Lavida is produced by Shanghai Volkswagen. Tailored specifically for Chinese consumers, the LAVIDA Lavida retains the excellent quality of German design while incorporating more luxurious and grand elements into its A-class car design.
6
5
Share

What are the symptoms of a faulty car throttle pedal sensor?

Car throttle pedal position sensor failure can result in uncontrollable throttle response or no acceleration response. If one or both sensor signals are interrupted, the electronic throttle fault indicator will activate. When the two internal resistor sets of the sensor cannot mutually verify, the ECU fails to obtain the correct current throttle pedal position, manifesting as weak engine acceleration. The car throttle pedal is a vehicle accessory designed to enhance driver control and improve driving safety. Most throttle pedals feature aluminum alloy construction, and installing an additional pedal can significantly increase vertical contact surface area. Repair methods for faulty throttle sensors: Timely maintenance is required for damaged throttle sensors. Remove the throttle assembly, locate the sensor's signal output wires, measure circuit resistance with a multimeter, operate the pedal while observing meter value changes to diagnose faults. Check for broken wires or disconnected connectors in the sensor harness, replacing if damaged. Throttle pedal sensor fault detection procedure: Remove the throttle pedal assembly, locate the throttle position sensor, identify its corresponding signal output wires, measure circuit resistance with a multimeter, operate the pedal while monitoring multimeter value changes to determine faults.
2
2
Share

What are the reasons for a car fuel pump having no power?

Possible causes include faults in the fuel injector's input and output circuits, such as loose wiring or poor connectors; it may also burn out due to voltage fluctuations from other parts of the car, resulting in no power. Function of the fuel pump: The role of the car fuel pump is to draw gasoline from the fuel tank and press it through the pipeline and fuel filter into the float chamber of the carburetor, providing the car engine with the power to start, thereby enabling the vehicle to operate. It is precisely because of the fuel pump that the gasoline tank can be placed at the rear of the car, away from the engine, and below the engine. Purpose of the fuel pump: The purpose of the gasoline pump is to supply the fuel required by various fuel injectors and cold start injectors. In electronically controlled fuel injection systems, there are generally two types of electric fuel pumps used: roller-type electric fuel pumps and vane-type electric fuel pumps. In a roller-type electric fuel pump, one end of the pump housing is the inlet, and the other end is the outlet. The roller pump on the inlet side is driven at high speed by the drive motor located in the middle of the pump housing. The rotor is eccentrically installed in the pump body, and the rollers are placed in the grooves of the rotor.
8
5
Share

What are the differences between Skoda KAMIQ and KAROQ?

KAROQ and KAMIQ differ in the following aspects: 1. Different development backgrounds: KAROQ was developed by Skoda with an 'authentic' approach, based on the MQB platform, and can be regarded as a scaled-down and simplified version of KODIAQ, or as a replacement for the previous YETI. KAMIQ, on the other hand, can be seen as a localized model developed by SAIC Volkswagen Skoda, which can also be considered Skoda's first localized model in the Chinese market. In terms of platform, KAMIQ can be viewed as being developed based on the Rapid (Santana, Jetta). 2. Different positioning of the two models: Although KAROQ has a compact size and simple suspension, its overall positioning remains in the 'small compact SUV' segment, with core competitors being products like the Qashqai. Therefore, it starts with TSI power and comes standard with a 7-speed dual-clutch transmission. KAMIQ's core competitor is the C3-XR. Of course, due to the low sales of the C3-XR, KAMIQ will eventually form a differentiated competition with mainstream competitors—its technical content, power configuration, and even price will be comparable to those of joint-venture small SUVs, but it will be larger in size and offer more space than mainstream joint-venture small SUVs.
5
0
Share

What are the methods for remote window closing on the 10th-generation Civic?

Top trim models can both open and close windows remotely, while other trims can only open but not close windows. The method is to press unlock, release, then press and hold unlock. Below are other methods for closing windows on the 10th-generation Civic: 1. Window button operations are as follows: Close; One-touch close (driver's window only); Open; One-touch open (driver's window only); Reversing the switch operation can stop the window midway. 2. There is also a window lock switch on the driver's side. This switch can prevent children from accidentally opening or closing passenger windows. Power windows can be operated within approximately 10 minutes after turning off the ignition or before opening the driver's door. If windows are operated repeatedly within a short time, window operation will be temporarily disabled. Car remote refers to the wireless remote control function of the central locking system. Owners can remotely open/lock doors or operate windows without inserting the key into the lock cylinder. Its greatest advantage is: Regardless of day or night, without needing to locate the keyhole, users can conveniently perform remote unlocking (opening doors), locking (closing doors), and window operations.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.