What is the displacement of the Hongqi HS7?

1 Answers
LaAlina
07/29/25 4:29pm
The displacement of the Hongqi HS7 is 3.0L, and its drive system is front-engine four-wheel drive. Taking the 2021 ZhiLian QiXiang Edition Hongqi HS7 as an example, its body dimensions are: length 5035mm, width 1989mm, height 1778mm, wheelbase 3008mm, fuel tank capacity 75L, and trunk capacity 858L. The 2021 ZhiLian QiXiang Edition Hongqi HS7 features a front suspension of double-wishbone independent suspension and a rear suspension of trapezoidal-arm multi-link suspension. It is equipped with a 3.0T turbocharged engine, delivering a maximum horsepower of 337PS, maximum power of 248kW, and maximum torque of 445Nm.
Was this review help?
6
4
Share
More Forum Discussions

What are the common faults of the CRV hybrid transmission?

This transmission basically has no faults, offering a very smooth driving experience with intelligent shifting logic. Related details are as follows: 1. The Honda CRV hybrid transmission comes from one of the best manufacturers currently available. Based on actual driving experience, it significantly reduces the drag sensation during downshifts compared to other brand models, delivering a direct power feel similar to a manual transmission while effectively maintaining smoothness and fuel efficiency. 2. It employs G-Design-Shift control technology and a high-strength transmission belt, featuring a wider gear ratio. Additionally, it further reduces friction based on lightweight and compact design, improving transmission efficiency.
9
2
Share

Where to Check the Oil Level for the First Maintenance of a Cayenne?

The oil level for the first maintenance of a Cayenne can be checked through the display in the combination instrument. Access the oil level information on the multifunction display, and it should be displayed between the minimum and maximum marks. Oil Level Reset: After opening the engine hood, the oil level will be reset. If the engine hood is closed, the oil level can be measured immediately. The oil level can be checked when the ignition is on, when the vehicle is stationary but the engine is still running, or even while the vehicle is in motion. Different Oil Level Scenarios: If the engine hood has been opened, the oil level can only be measured after the vehicle has been driven for at least 10 km. The difference between the min (minimum) and max (maximum) marks is approximately 1 liter, with each displayed segment corresponding to a 0.251-liter fill quantity.
6
2
Share

What is the Difference Between Gasoline Grades?

Taking 92-octane and 95-octane gasoline as examples, the specific differences between gasoline grades are as follows: 1. Applicable compression ratio: Vehicles with a compression ratio between 8.5-9.5 should generally use 92-octane gasoline, while cars with a compression ratio greater than 9.5 should use 95-octane gasoline. 2. Octane rating: 92-octane gasoline has a lower octane rating than 95-octane gasoline. Specifically, 92-octane gasoline contains 92% isooctane, while 95-octane gasoline has an octane rating of 95%. The gasoline grade represents the octane number of the gasoline. For example, 92-octane gasoline consists of approximately 92% isooctane and 8% n-heptane. Since isooctane has better anti-knock properties while n-heptane has poorer anti-knock performance, a higher octane number indicates better anti-knock properties of the gasoline.
6
5
Share

Where is the spark plug located in a Chery car?

The spark plug in a Chery car is generally located at the top of the engine cylinder and can be clearly seen after removing the high-voltage ignition coil. Spark plug replacement process: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris such as leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires in the firing order and secure the cover. Spark plug replacement interval: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
2
1
Share

Will an Automatic Transmission Car Roll Back on a Slope?

Automatic transmission cars are prone to rolling back when encountering steep slopes, while on gentle slopes, the occurrence of rolling depends on the vehicle's performance. Below are detailed introductions to the gears of an automatic transmission car: 1. The R gear is the reverse gear. Engaging this gear connects the hydraulic system's reverse oil circuit, causing the drive wheels to rotate in reverse for backward movement. Do not forcibly shift to the "R" gear when the vehicle is not completely stopped, as this may damage the transmission. 2. The N gear is the neutral gear. When in neutral, the planetary gear system idles and cannot output power. 3. The D gear is the drive gear. When the gearshift lever is in this position, the hydraulic control system automatically connects the corresponding forward gear oil circuit based on throttle opening and vehicle speed signals. It can automatically shift up or down with changes in driving speed, achieving automatic transmission functionality. 4. The P gear is the parking gear. It uses a mechanical device to lock the rotating parts of the car's tires, preventing the vehicle from moving.
17
4
Share

What does cold start mean for a car?

Cold start of a car refers to starting the engine when it has been shut down for a period of time and its internal temperature has reached the ambient temperature. In contrast, there is also hot start of the engine, which means starting the engine shortly after it was last shut down while there is still relatively high residual heat inside. Cold starting an engine is more difficult than hot starting, especially when the ambient temperature is very low and the fuel is diesel. Car ignition starting method: 1. Insert the key: Get in the car and insert the key, turn the key to the second power-on position for ignition, and wait for the system self-check to complete; 2. Start the car's engine: Shift the gear lever from P to N; release the brake and start the car's engine; 3. Start moving: Press the brake pedal with your foot, shift the gear lever from N to D, release the brake and press the accelerator to start moving.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.