What is the displacement of the Golf R series?

What is a Left-Turn Waiting Area?

A left-turn waiting area is designated for vehicles preparing to make a left turn. It spans from the original vehicle stop line to the center of the road, with a slight curve at the end. Roads implementing left-turn waiting areas are typically one-way streets with three or more lanes. Below are additional details: 1. When both straight and left-turn signals are red: Left-turning vehicles must not enter the waiting area and should queue behind the stop line until permitted. 2. When the straight signal in the same direction turns green (while the left-turn signal remains red): Left-turning vehicles should enter the waiting area in order and wait to turn left. When the left-turn signal subsequently turns green, vehicles in the waiting area should proceed left through the intersection in sequence. 3. When the left-turn signal is red (or yellow): Left-turning vehicles that have not entered the waiting area must stop behind the stop line and wait, refraining from entering the waiting area. Vehicles already in the waiting area should continue to turn left through the intersection without stopping, ensuring smooth traffic flow.

5

Share

Why does the fan not spin at the first speed but only at the third speed?

It is caused by the decrease in the capacity of the fan starting capacitor. Replacing it with a capacitor of the same capacity will solve the problem. Fan capacitors are generally divided into two types: starting capacitors and running capacitors. The relevant introduction is as follows: 1. Starting capacitor and running capacitor: The starting capacitor assists the motor during startup and becomes inactive once the motor starts running; the running capacitor continues to assist the motor operation even after startup, meaning it remains active. The capacitor in an electric fan is usually a starting capacitor. 2. The function of the fan: A fan refers to a device used to generate wind for cooling on hot days. An electric fan is a device that uses electricity to generate airflow, with an internal configured blade that rotates when powered to create natural wind for cooling purposes.

5

2

Share

Is the highway free during holidays without ETC?

During legally designated free holidays, vehicles passing through highway toll stations are exempt from fees regardless of whether they have ETC or not. How ETC works: Through dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at toll stations, computer networking technology is used for backend settlement processing with banks. This enables vehicles to pass through highway or bridge toll stations without stopping while paying the required fees. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Low-carbon solution where vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, thereby minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle acceleration and braking, lowering mechanical wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase vehicle processing efficiency by 2-3 times, making traditional ETC systems more updated, faster, and higher-tech. Compared to license plate payment systems, ETC technology is more mature and advantageous.

7

3

Share

How to Reset the Golf Maintenance Reminder Light?

To reset the Golf maintenance reminder light, follow these steps: 1. Turn off the ignition switch and press the "set" button on the odometer side. 2. Hold the button and turn on the ignition switch. The maintenance cycle display area will enter the reset mode. 3. Release the button and press the button at the bottom left of the tachometer within 20 seconds. The display will return to the normal display mode. Here is some related information about the car maintenance reminder light: The car maintenance light is triggered when the vehicle reaches a certain mileage. The onboard computer detects that the vehicle requires maintenance, and the dashboard will illuminate to alert the owner.

15

5

Share

How Long Does a Manual Transmission Last?

Manual transmissions typically last 8-10 years. Extended information: Methods to prolong the lifespan of a manual transmission are as follows: 1. Reduce idle warm-up time: Warming up the oil through idling is slower than driving while warming up. The shorter the time it takes for the engine to reach normal operating temperature, the less wear it experiences. Prolonged idling extends the time needed for the engine to reach normal temperature and increases carbon buildup. 2. Shift to a lower gear when climbing hills: When the car creeps forward without braking or accelerating, the clutch is in a semi-engaged state, which causes significant wear on the clutch plates. 3. Avoid excessively low RPMs: Engine RPMs are too low when they fall below the first gear's RPM at 10 km/h. Low RPMs reduce the car's inertia, increasing pressure on engine components and leading to incomplete fuel combustion and insufficient power. 4. Slow down before turning off the engine: When parking, shift to park, engage the handbrake, and turn off the engine—avoid rushing this process. 5. Use manual mode on steep slopes: For vehicles with manual-automatic transmissions, limit the gear to first when frequently starting on slopes to protect the transmission. Similarly, use lower gears in manual mode when descending steep slopes or driving in underground garages. 6. Use manual mode for overtaking: If the transmission is in a high gear when overtaking, quickly downshift using manual mode to leverage the high torque of lower gears for a rapid speed increase, enabling faster overtaking.

15

2

Share

Will Fuel Consumption Decrease After the First Maintenance?

New car fuel consumption reduction is unrelated to the first maintenance but is related to the break-in period. Relevant explanations are as follows: 1. Unrelated to the first maintenance: The first maintenance is done at a 4S shop, where the oil used is the same as that originally installed in the car, so there is no change in the oil aspect—it just becomes cleaner. Other aspects are merely routine checks, and the engine program will not be adjusted with a computer; at most, it checks for any fault codes and whether the data is normal. Therefore, fuel consumption is unrelated to the first maintenance items themselves. 2. Related to the break-in period: Fuel consumption has some relationship with the break-in period, but it is not significantly related to the mechanical break-in itself; rather, it is more related to the driver's habits. Mechanically, during the break-in period, the coordination between various moving parts is not yet perfect, resulting in relatively higher friction, less smooth movement, and greater resistance, which leads to higher fuel consumption.

5

3

Share

What is the displacement of the Golf R series?

What is a Left-Turn Waiting Area?

Why does the fan not spin at the first speed but only at the third speed?

Is the highway free during holidays without ETC?

How to Reset the Golf Maintenance Reminder Light?

How Long Does a Manual Transmission Last?

Will Fuel Consumption Decrease After the First Maintenance?

Can Airbags Be Installed Aftermarket?

What is the real fuel consumption of the Volkswagen Sharan?

How Long Can China IV Last?

Why is the tire pressure yellow light on?