What is the displacement of the Civic Type R?

1 Answers
OAlice
07/30/25 6:31am
The displacement of the Civic Type R is 2.0T, equipped with a turbocharged engine. Taking the 2020 Civic Type R as an example, it belongs to the compact car category with body dimensions of: length 4658mm, width 1800mm, height 1416mm, wheelbase 2700mm, fuel tank capacity 47L, and curb weight 1245kg. The 2020 Civic Type R features a MacPherson strut front suspension and a multi-link independent rear suspension, with a maximum horsepower of 125PS, maximum power of 92kW, maximum torque of 173Nm, and is paired with a continuously variable transmission.
Was this review help?
17
3
Share
More Forum Discussions

What's the matter with incorrect exhaust camshaft assembly?

In this case, it is necessary to inspect the engine's variable timing system, specifically whether the oil solenoid valve of the VANOS system is functioning properly. Check the solenoid valve's resistance value, wiring, and whether the solenoid valve spool is stuck. If stuck, try cleaning it! Additionally, inspect whether the exhaust camshaft position sensor is working correctly. If necessary, examine the electronic valve system, namely the VALVETRONIC system. Introduction to Camshaft: The camshaft is a component in a piston engine. Its function is to control the opening and closing actions of the valves. Although in a four-stroke engine, the camshaft's speed is half that of the crankshaft (in a two-stroke engine, the camshaft's speed is the same as the crankshaft), its speed is generally still very high, and it needs to withstand significant torque. Therefore, the design requires high strength and support for the camshaft, and its material is usually high-quality alloy steel or alloy steel. Camshaft Structure: The main body of the camshaft is a cylindrical rod approximately the same length as the cylinder group. It has several cams mounted on it to drive the valves. The camshaft is supported within the camshaft bearing holes via camshaft journals, so the number of camshaft journals is an important factor affecting the camshaft's support stiffness. If the camshaft's stiffness is insufficient, it may bend and deform during operation, affecting the valve timing.
5
4
Share

What is the inventory turnover rate for new cars?

New car inventory turnover rate is generally around 70%. A higher inventory turnover rate indicates better sales performance. Increase or decrease in inventory: Under the conditions of material shelf life and capital allowance, the inventory control target days can be appropriately increased to ensure reasonable inventory. Conversely, the inventory control target days can be appropriately reduced. Calculation formula for inventory turnover rate: The commonly used inventory turnover rate = Annual cost of goods sold / Average inventory value for the year. The annual cost of goods sold (COGS) (excluding sales expenses and management costs) is used as the numerator, divided by the annual average inventory value.
11
3
Share

What is the horsepower of the Qiao Ge i125?

The maximum power of the Qiao Ge i125 is 6.1 kilowatts. Since 1 kilowatt equals 8.296 horsepower, 6.1 kilowatts can be calculated as 8.296 horsepower, meaning the Qiao Ge i125 has 8.296 horsepower. Introduction to Horsepower: Horsepower is a unit of power, with the international unit of power being the watt. Horsepower is commonly used to measure the power of automobiles, such as a car's maximum power being 130 horsepower. When Maximum Power Occurs: For family cars, the ideal engine should achieve maximum torque at relatively low RPMs, while maximum power should occur at higher RPMs.
18
3
Share

What to Do When a Hybrid Car Battery Runs Out of Power?

Specific solutions for when a hybrid car battery runs out of power are as follows: 1. For plug-in hybrid electric vehicles (PHEVs) with a dead battery, simply drive it as a conventional fuel-powered car. 2. For hybrid vehicles primarily powered by fuel, theoretically, they cannot continue to drive when the battery is dead. 3. For range-extended hybrid electric vehicles (EREVs), the battery will not run out of power as the engine continuously charges the battery to ensure the motor has a continuous power output. Below is an introduction to the three types of hybrid vehicles: 1. Plug-in hybrid electric vehicles, commonly known as PHEVs. They are driven by two power systems, with three driving modes including motor drive, engine drive, and combined motor-engine drive. However, their pure electric range is short, and when driven solely by the engine, their fuel consumption is significantly higher than that of conventional fuel-powered cars. 2. HEV hybrid vehicles, where the power output is mainly from the fuel engine. At low speeds, they rely on the motor for power output, while the engine intervenes during acceleration and high-speed driving. 3. Range-extended hybrid electric vehicles, commonly known as EREVs. This type of hybrid vehicle differs from the above two, as its power mainly comes from the engine whether driving at low or medium-high speeds, but the motor plays the role of power output.
12
2
Share

What transmission is equipped in the new Vios?

The new Vios is equipped with a CVT continuously variable transmission. It comes with a 1.6L Dual VVT-i engine and a 1.3L VVT-i engine. In terms of safety features, standard configurations include the GOA body structure, front passenger airbags, ABS with EBD, BA (Brake Assist System), and driver's seat belt reminder (warning light plus alert sound). The new Vios features an enlarged front grille area with multi-slat horizontal chrome grille bars, replacing the current single body-colored slat design. The fog light surrounds have been changed from black to bright silver. The current Vios tail lights adopt a red-on-top and white-on-bottom color scheme, while the facelifted Vios uses a white-on-top and red-on-bottom combination. Maintenance methods for the new Vios transmission: 1. Follow the manufacturer's requirements to regularly check transmission fluid, change it on schedule, and use the manufacturer-specified transmission fluid grade. 2. Only about 30% of the total fluid volume can be drained through the drain bolt. In this case, using a transmission cleaner is not recommended. 3. For a complete transmission fluid change, use a transmission cleaner with a transmission fluid exchange machine. Before draining the old fluid, pour the cleaner into the transmission, lift the drive wheels off the ground, start the engine, and shift gears repeatedly to allow the cleaner to flush all internal areas. After cleaning, use the exchange machine to drain the old fluid while injecting new fluid, and finally replace the filter.
5
1
Share

What are the mnemonic rhymes for penalty questions in Subject One?

Here are the mnemonic rhymes for penalty questions in Subject One: 1. Overwork, alcohol, highway stop: deduct six points: continuous driving of road passenger vehicles or dangerous goods transport vehicles for more than 4 hours without rest or with rest time less than 20 minutes; driving under the influence of alcohol; illegal parking on highways. 2. Low visibility violation: driving on highways in low visibility weather conditions without following regulations, deduct three points. 3. Violating signs and markings: violating prohibitory signs, warning signs, prohibitory markings, or warning markings, deduct two points.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.