···
Log in / Register

What is the displacement of the Changan CX20?

4 Answers
DelDelaney
08/27/25 2:13am
The Changan CX20 has two displacement options: 1.3L and 1.4L. The vehicle is equipped with two engines: a 1.3L naturally aspirated engine and a 1.4L naturally aspirated engine. The 1.3L engine delivers a maximum power of 63kW and a maximum torque of 110Nm, while the 1.4L engine produces a maximum power of 74kW and a maximum torque of 131Nm. The Changan CX20 is a compact car under the Changan brand, with dimensions of 3970mm in length, 1730mm in width, and 1615mm in height, and a wheelbase of 2450mm. It features a MacPherson independent front suspension and a trailing arm rear suspension, with a front-wheel-drive layout.
Was this review help?
6
4
Share
MacJames
09/08/25 8:57am
The Changan CX20 has a 1.4-liter engine. I've been driving it to and from work for over three years, and I find this displacement quite suitable. It provides adequate power for city driving without being fuel-thirsty. My average fuel consumption is around 7 liters per 100 kilometers, and a full tank can last over 400 kilometers, which is very economical. The engine runs smoothly, with decent responsiveness when starting and overtaking, making it ideal for commuters like me stuck in traffic daily. Maintenance is straightforward, basically requiring an oil change every 5,000 kilometers, and the parts are reasonably priced. If you're considering buying a used one, this displacement version holds its value well, with a durable engine and few faults, making it a cost-effective family car choice overall.
Was this review help?
18
4
Share
Expand All
CourtneyAnn
10/23/25 2:17am
In terms of engine details, the Changan CX20 has a displacement of 1.4 liters, with a 1399cc specification, featuring an inline four-cylinder design, and delivers approximately 101 horsepower. The displacement affects overall performance, and paired with the naturally aspirated system, it provides decent torque at low speeds, making city driving agile and effortless. Fuel consumption is measured at around 6.5L/100km, and it meets the National V emission standards. Transmission options include manual and automatic versions—I've driven the manual version, and the gear shifting feels smooth. If durability is a concern, this engine has a compact structure, with primary maintenance checks focusing on spark plugs and intake valves, but overall, it's not prone to issues. The modification potential is limited, and keeping the factory tuning ensures stability.
Was this review help?
12
1
Share
Expand All
McWalker
12/06/25 2:41am
I often drive the Changan CX20 with a 1.4-liter engine, which is very handy for daily commuting. The steering wheel is light, and the acceleration from a standstill is not sluggish. In city traffic jams, the power is sufficient, and fuel consumption is well controlled, averaging about 7 liters per 100 kilometers. When cruising on the highway at 100km/h, it performs decently, but you need to press the accelerator more when overtaking, and the engine noise is moderate. For those on a tight budget, this displacement car is cheap to maintain, with easily available parts, making it suitable for beginners or family use.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

How to Install a Child Safety Seat Without ISOFIX Interface?

The following are specific methods for installing a child safety seat without an ISOFIX interface: 1. Use the seat belt to secure the seat. There are two installation methods: forward-facing and rear-facing, with rear-facing being more suitable for infants. 2. Since the seat belt can easily get stuck when stretched too long, pull it out completely at the beginning to facilitate subsequent steps and avoid insufficient length or getting stuck, which would require restarting the process. 3. Thread the seat belt through the seat, secure it with the seat's red fixing clip to prevent the belt from sliding and failing to hold the seat in place, then insert it into the buckle.
11
2
Share

How to Replace Car Air Conditioning Refrigerant?

Here are the steps to replace the refrigerant: 1. Discharge the refrigerant from the air conditioning system. 2. Remove the radiator; 3. Remove the condenser inlet and outlet pipes; 4. Unscrew the fixing bolts and remove the condenser; 5. Before installation, thoroughly clean the condenser to ensure sufficient airflow through the condenser coils for adequate heat dissipation; 6. During installation, pay attention to the correct position of the lower part of the condenser. The gap between the upper end and the engine hood should not be less than 5mm. Here is additional information on the symptoms of excessive refrigerant in car air conditioning: 1. The suction and discharge pressures of the air conditioning system are too high, and the equipment operates at elevated temperatures; 2. The current value of the compressor power supply is significantly higher, and prolonged operation may burn out electrical components; 3. The condenser is filled with refrigerant, reducing the heat exchange area, leading to high-pressure protection when the car air conditioning is turned on.
12
0
Share

How to Turn on the Air Conditioning Cooling in Audi Q5?

Here are the methods to turn on the air conditioning cooling in Audi Q5: 1. OFF air conditioning unit button, press the rotary regulator 2 to turn on or off the air conditioning unit. If another button or a rotary regulator is pressed, the air conditioning unit will also be turned on. When the air conditioning unit is turned off, the air supply from outside the vehicle is cut off. 2. A/C cooling operation mode, press the A/C button to turn on or off the cooling mode. When the cooling operation mode is turned off, the air is not cooled or dehumidified. In this case, water mist may form on the windshield. When the outside temperature is below zero, the cooling mode is automatically turned off. 3. Cooling operation, use the button to turn on/off the maximum cooling. When the cooling operation mode is turned off, the air is not cooled or dehumidified.
19
5
Share

What to Do When Your Car Battery Dies Because the Headlights Were Left On

Solutions for when your car battery dies due to leaving the headlights on are as follows: 1. Jump-start the car: If the battery dies in the city, the owner can ask a friend or a passing vehicle to jump-start the car using jumper cables. Connect the positive and negative terminals of the dead battery with the jumper cables, then attach the other ends to the rescue vehicle's battery. Start the dead car and drive to a repair shop as soon as possible for battery repair or replacement. 2. Call a tow truck: If this happens in a remote area, call a tow truck to take the car to a repair shop for charging. 3. Push-start the car (only for manual transmission cars): If the battery dies in the countryside with no passing vehicles to help, you can push-start the car. The specific method is to find a passerby to help push the car while the ignition is on. As the car starts moving, the driver should press the clutch and shift into second gear. When the speed increases slightly, release the clutch and gently press the accelerator to start the car.
5
3
Share

What Causes Steering Wheel Vibration When Lightly Pressing the Brakes?

Steering wheel vibration when lightly pressing the brakes is caused by: uneven wear between the brake discs and brake pads, or jagged wear on the brake discs, which generates resonance transmitted to the steering wheel through the steering gear. The only solution to this issue is to replace the brake discs and brake pads with new ones. The braking system is crucial and requires regular inspection and replacement of brake fluid. Over time, friction between the brake pads and discs produces metal shavings that need periodic cleaning. During normal braking, the brake discs generate significant heat due to friction as the vehicle slows down, leading to high temperatures. Compared to brake pads, brake discs wear more slowly, but after prolonged use, they will show signs of wear. If the brake disc surface becomes uneven or the thickness falls below standard, it can severely impact braking performance over time.
9
3
Share

Do hybrid electric vehicles need to be charged?

Hybrid electric vehicles do not need to be charged. They are equipped with two power sources: the thermal power source generated by gasoline or diesel and the electric power source generated by the battery. In addition to the power system, the vehicle itself comes with an energy recovery system. During driving, excess energy from the engine and braking energy can be converted into electricity and stored in the battery for charging purposes. Hybrid electric vehicles use an electric motor as an auxiliary power source to assist the engine, and the electric motor can provide strong and smooth power during normal driving.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.