What is the displacement of the Audi Q5 40TFSI?

1 Answers
Amir
07/30/25 2:42am
The Audi Q5 40TFSI has a 2.0T displacement. Here are the details about the Audi Q5 40TFSI: 1. Meaning: The number '40TFSI' at the rear of the car represents the vehicle's acceleration value. A higher number indicates faster acceleration. 2. Configuration: The Q5 40TFSI is a midsize SUV with body dimensions of 4629mm in length, 1898mm in width, and 1655mm in height. It has a wheelbase of 2807mm and a fuel tank capacity of 75L. The Q5 40TFSI is equipped with a 2.0-liter turbocharged engine, delivering a maximum horsepower of 230ps, a maximum power of 169kw, and a maximum torque of 350nm. It is paired with an 8-speed automatic transmission. The front suspension is a five-link independent suspension, and the rear suspension is a trapezoidal link independent suspension.
Was this review help?
10
3
Share
More Forum Discussions

What is the car with the Spirit of Ecstasy called?

The Spirit of Ecstasy emblem represents Rolls-Royce motor cars. Rolls-Royce is a world-class luxury automobile manufacturer. Introduction to Rolls-Royce: Rolls-Royce has nicknames such as Rolls, Roller, and Double-R, but at the company headquarters in Derby, UK, it is commonly referred to as Royce-s. The phrase 'The Rolls-Royce of' is often used to describe something as the best of its kind. History of Rolls-Royce: Rolls-Royce is a British luxury automobile brand founded in 1906 by Frederick Henry Royce (Henry Royce) and Charles Stewart Rolls (Charlie Rolls). Rolls-Royce cars are renowned as outstanding representatives of top-tier automobiles, celebrated worldwide for their luxury, and are one of the primary symbols of European and American automotive excellence.
3
3
Share

Do I need to change the color back for the annual vehicle inspection after a car color change?

It is not necessary to change the color back for the annual vehicle inspection after a car color change. Below is some information regarding the annual inspection of motor vehicles: Legal Basis: Article 32 of the "Regulations on the Registration of Motor Vehicles" stipulates that the owner of a motor vehicle may apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the vehicle's inspection validity period. Consequences: Vehicles that have not undergone the annual inspection within the required time and continue to be driven on the road will be subject to a fine of 200 yuan and a deduction of three points. Additionally, the vehicle may be temporarily impounded. Everyone must consciously undergo the annual inspection. The inspection can be done up to three months in advance, but it must not be overdue. Overdue inspections will result in additional fines. The timing of the annual vehicle inspection is determined based on the date of the vehicle's initial registration. For example, if the initial registration date on the motor vehicle license is June 2018, then the annual inspection time is every June.
10
3
Share

Where is the Mercedes GLK's warning triangle located?

The warning triangle of the Mercedes GLK300 is located inside the left trim panel in the trunk. Rotate the left trim panel in the direction of the arrow to open it and the triangle will be visible. How to use the Mercedes GLK300's warning triangle: Adjust the three legs to your desired height. The lower the legs are extended, the narrower the tube diameter becomes, making it less stable. Therefore, it is recommended to primarily use the upper leg sections when setting up. Based on the required height, first pull out the second section, then sequentially extend the lower sections, and finally pull out the end leg section. Introduction to vehicle warning triangles: The warning triangle in a car is used to alert following vehicles when you need to stop for emergency repairs due to sudden breakdowns or in the event of an accident, indicating that there is a vehicle with issues ahead and to proceed with caution.
13
2
Share

At what mileage should the second maintenance be performed for Volkswagen?

This can be completely determined according to the car maintenance manual, and it can be done at 10,000 kilometers. The items for the second car maintenance are as follows: Check if the steering free travel and toe-in meet the requirements: The steering should be light, flexible, and reliable, with no left-right wobbling or deviation of the front wheels during driving. Check if the clutch free travel meets the requirements: The operation should be convenient, with complete separation, smooth and reliable engagement, no abnormal noise, and no oil leakage in the hydraulic system. Check the gearbox and drive axle: Or ensure that the half-shaft transmission device and other components are well lubricated, reliably connected, with no abnormal noise or overheating, no gear jumping, flexible gear shifting, and no oil leakage.
4
3
Share

Which button is the mirror heater for the Corolla?

The rearview mirror heating button for the Corolla is located on the car's air conditioning control panel, specifically the middle one among the three rotary buttons. Principle of heated mirrors: The mirrors can be heated via heating wires embedded behind the mirror surfaces to ensure clear visibility. The heated rearview mirror function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for drivers to manually wipe the mirrors frequently, thereby reducing driving hazards. Introduction to heated mirrors: Heated power mirrors refer to the side mirrors on both car windows. Firstly, they eliminate the need for manual angle adjustment - being electrically controlled, they typically have adjustment buttons near the driver's seat to modify the mirror angles. Secondly, these mirrors can automatically heat up, drying raindrops or snow accumulation on the surface during rainy or snowy conditions, thus maintaining clear visibility.
9
3
Share

Should Civic touch-up paint be done at a 4S shop or outside?

It is recommended to go to a 4S shop for painting, as the quality is better. Small shops outside may have some color differences. Precautions for painting are as follows: Do not wash the car: After the car is painted, the paint surface should be fine after a few days. Just after painting, pay attention to insufficient baking time. It is best not to wash the car when the paint surface is not completely dry. Avoid contact with oil stains: Do not come into contact with chemicals and oil stains, as they can easily damage the paint surface. Do not cover with a car cover: Try not to cover the newly painted car with a car cover, as it may cause fine scratches on the paint surface. Park in the sun as much as possible: First, it helps the paint surface to dry thoroughly, and second, it can also test the skills of the paint mixing technician.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.