What is the displacement of the 45tfsi at the rear of the Audi?

1 Answers
VonJulia
07/25/25 11:53am
The displacement of the 45tfsi at the rear of the Audi is 3.0t. The numerical size on the tail badge of an Audi directly indicates the power level, with larger numbers representing stronger power. Taking the Audi A6L as an example: it is a mid-to-large-sized 4-door, 5-seater sedan with dimensions of 5038mm in length, 1886mm in width, and 1475mm in height, and a wheelbase of 3024mm. It is equipped with a 7-speed dual-clutch transmission and has a top speed of 230 kilometers per hour. The fuel tank capacity of the Audi A6L is 73L, with a maximum engine power of 140 kilowatts and a maximum power speed ranging from 4200 to 6000 revolutions per minute.
Was this review help?
4
3
Share
More Forum Discussions

How often should the transmission fluid be changed for the Magotan B8?

The transmission fluid for the Magotan B8 is generally recommended to be changed every two years or approximately 40,000 kilometers. The Magotan B8 is equipped with a 7-speed wet DQ380 transmission, with a maximum torque of 420 Nm. The replacement intervals for transmission fluid vary across different vehicle models. Replacement intervals for different transmissions: Manual transmission fluid is typically recommended to be changed every three years or approximately 100,000 kilometers; automatic transmission fluid is generally recommended to be changed every two years or approximately 40,000 kilometers; continuously variable transmission (CVT) fluid is usually recommended to be changed every two years or approximately 60,000 kilometers. Functions of transmission fluid: Reduces friction and wear, controls clutch friction and synchronizer performance; bears loads (low-speed high torque, vibration loads), dissipates heat, reduces vibration and noise, and cleans contaminants at gear meshing points (cleaning function); prevents corrosion, pitting, and surface metal tearing, isolates metal surfaces, and prevents direct contact between metal surfaces.
20
5
Share

What issues should be paid attention to when selling an old motorcycle?

Selling an old motorcycle requires the most attention to the motorcycle transfer procedures, followed by the inspection of the motorcycle's condition. Engine inspection: Check whether the engine body is damaged, whether the sealing is good, and whether there is oil leakage. Check whether the cylinder block and radiator fins are corroded or damaged. Listen to whether the sound of the engine during operation is crisp, whether the idle speed is stable, whether there are knocking sounds or other noises, and whether the vehicle body has abnormal vibrations. Check whether the engine speed rises instantly when the throttle is suddenly increased, and whether the speed drops quickly when the throttle is released. Electrical circuit and equipment inspection: Check whether the wiring is neat, whether it has been modified messily, whether the aging is severe, and whether there are any suspicious areas that could cause a short circuit. Verify whether the inductive electronic components and indicator lights are working normally, and whether the electric starter motor operates properly. Suspension inspection: Hold the front brake and push down on the handlebars to observe whether the front shock absorber sinks softly and returns smoothly. Check for any abnormal noises, stiffness, incomplete return, severe oil seal aging, oil leakage, wear on the fork tubes, or collision marks.
12
1
Share

How long is the built-in 4G network free for Haval F7?

Haval F7's built-in 4G network is free for 3 years, and users can renew the service at their own expense after expiration. Relevant information is as follows: 1. Functions: The Haval F7 is equipped with a mobile phone interconnection function, which cannot connect to functions like CarPlay or CarLife. Users need to scan a QR code to download Haval's own mobile phone interconnection application, which supports 48 mobile phone brands across Android and iOS systems. The mobile phone interconnection application can be used for making calls, navigation, and other functions. 2. App: Operate mobile apps on the car screen to keep driving applications online in real time. 3. Convenient and safe operation: Supports common functions such as steering wheel button operation. Deeply integrated with the car system, it does not conflict with in-car music or navigation. 4. Social features in the car: For weddings, moving, group travel, or gathering for appointments, users can check friends' locations in real time and engage in real-time voice intercom to stay with the group without falling behind.
6
1
Share

Should New Cars Apply Paint Protection Film?

New cars need paint protection film, which is a layer of film applied around the car to protect the paint. It can resist scratches. Paint protection film is not easily stained. When washing the car, there's no need to worry about scratching the paint during cleaning, nor about daily stubborn stains being hard to clean or damaging the paint. This makes car washing easier, more convenient, and quicker. The role of paint protection film: It is a transparent polyurethane film. Although it cannot protect against strong impacts, it can at least resist minor scratches and also serves as a barrier for the car paint, preventing acidic corrosion from rain and snow. Therefore, it is recommended to apply paint protection film to new cars to provide better protection for the original paint. Precautions for applying paint protection film: Before application, ensure that the car body has not been recently repainted. If the film is applied over repainted areas, it may stick to the repainted parts, and when removed later, it could peel off the repainted sections. It's advisable to wait for a while after repainting before applying the film. After installation, avoid prolonged direct exposure to high temperatures for a few days or up to three days, as high temperatures can cause bubbles between the film and the paint surface, affecting the overall appearance of the car.
16
2
Share

Differences Between Corolla and Corolla Dual E+?

Here are the specific differences between Corolla and Corolla Dual E+: 1. Hardware: The Corolla Dual E+ adopts lithium-ion batteries, which have the same size as the nickel-metal hydride batteries in the Corolla Hybrid but offer higher energy density. Other distinctions include the charging control system and an external charging port with charging unit. 2. Driving mode: The hybrid system of the Corolla Hybrid intervenes during vehicle startup, uphill driving, and acceleration to provide greater torque output, with the motor assisting the engine. However, due to its smaller onboard battery capacity, it cannot support long-distance pure electric driving. In contrast, the Corolla Dual E+, equipped with a larger power battery, typically achieves a pure electric range of 50-100km, allowing it to function as both a pure electric vehicle and a fuel-powered car. 3. Usage cost: The operating cost of a hybrid vehicle depends on fuel consumption. Comparing their fuel efficiency, the Corolla Hybrid has a combined fuel consumption of 4.2L/100km as per the Ministry of Industry and Information Technology, while the fuel-powered Corolla version consumes 5.8L/100km, resulting in a fuel-saving effect of approximately 27.6% for the Corolla Hybrid.
9
1
Share

What brand is the Yidong car?

Yidong is a car model under the Changan Automobile brand. Below are the specific details about the Yidong: 1. The Yidong is a compact sedan from Changan, with a wheelbase of 2700 mm, and dimensions of 4730 mm in length, 1820 mm in width, and 1505 mm in height. 2. The Yidong is equipped with two types of engines: a 1.6-liter naturally aspirated engine and a 1.4-liter turbocharged engine. The 1.6-liter naturally aspirated engine delivers 128 horsepower and a maximum torque of 161 Nm, with the maximum power achieved at 6000 rpm and the maximum torque at 4000 rpm. This engine features DVVT technology and direct fuel injection, and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT. 3. The 1.4-liter turbocharged engine produces 158 horsepower and a maximum torque of 260 Nm, with the maximum power achieved at 5500 rpm and the maximum torque ranging from 1500 to 4000 rpm. This engine also features DVVT technology and direct fuel injection, and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.