What is the displacement of Audi 35 TSI?

What is the fuel consumption per 100 kilometers for a 1.8L displacement car?

Most cars with a 1.8-liter displacement have a fuel consumption of 7 to 10 liters per 100 kilometers. The actual fuel consumption is not only related to the car itself but also to the driver's driving habits and road conditions. Below is more information about car fuel consumption: 1. Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is a fuel economy indicator when a car is driving at a constant speed on good road conditions. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. For example, France and Germany use the constant-speed fuel consumption at 90Km/h and 120Km/h as the main evaluation indicators for fuel economy. China also adopts this indicator, and the fuel consumption per 100 kilometers indicated in the manuals of domestic cars is usually the constant-speed fuel consumption. 2. Calculation method: Divide the refueling amount by the unit price and driving distance to obtain the fuel consumption per kilometer, then multiply by 100 kilometers to get the fuel consumption per 100 kilometers.

18

4

Share

What is the difference between Tesla AP and adaptive cruise control?

Tesla AP is IACC (Integrated Adaptive Cruise Control), and there is no difference between the two. Functions of Tesla AP: Tesla's IACC, also known as Autopilot, utilizes the vehicle's sensors, millimeter-wave radar, eight high-definition wide-angle cameras, built-in chips, and built-in navigation maps. When activated, it autonomously sets the speed via network data or manual input, identifies obstacles ahead, calculates speed differences through chip processing, adjusts the following speed accordingly, and uses front cameras to recognize lane markings, incorporating a lane-keeping assist system. Usage of Tesla AP: On highways or ring roads, it maintains the center of the lane and can autonomously determine steering angles for curves, assessing the speed difference between the vehicle ahead and itself while adhering to speed limits. In urban driving conditions, such as congested traffic, it can automatically follow and stop, then restart on its own based on the situation of the vehicle ahead.

2

3

Share

Which Brand Do the Hydrogen-Powered Vehicles at the Winter Olympics Belong To?

The hydrogen-powered vehicles at this Winter Olympics come from automakers such as Toyota, BAIC Group, Foton Motor, and Yutong Bus. During the Beijing Winter Olympics, over 1,000 hydrogen-powered vehicles will be demonstrated in operation, supported by more than 30 hydrogen refueling stations. The vehicle models for this Winter Olympics include hydrogen fuel cell buses, hydrogen fuel cell sedans, and hydrogen fuel cell special-purpose vehicles. In the bus category, Foton Motor provided 515 hydrogen fuel cell buses, Geely Star provided 80 city buses, and Toyota provided 107 minibuses. For the sedan category, Toyota supplied 140 units of the second-generation MIRAI. Hydrogen-powered vehicles primarily operate on the principle of combining hydrogen fuel with oxygen in the air to produce water, converting hydrogen power into electricity through this chemical reaction for propulsion, representing a variation of electric vehicles. Compared to pure electric vehicles, hydrogen-powered vehicles offer advantages such as faster refueling and longer driving ranges, while also surpassing electric drives in terms of energy conversion efficiency. These are benefits that current pure electric vehicles cannot match.

4

1

Share

Should You Drive at High Speed Before or After the First Maintenance?

Drive at high speed before the first maintenance. The break-in period for a new car is generally around 2,000 kilometers. Under normal circumstances, it is necessary to drive at high speed to allow the engine to operate fully, usually not exceeding two-thirds of the maximum speed, maintaining a steady speed for more than 10 minutes, then coasting in neutral until the car stops. Before the first maintenance, pay attention to the following points: 1. Make an appointment in advance: It is best to schedule an appointment with the 4S store beforehand; otherwise, you may encounter situations where no service bays are available or long waiting times. 2. Bring necessary documents: When going for the first maintenance, bring essential items such as the maintenance manual and vehicle registration. If unsure about what to bring, clarify during the appointment. 3. Record issues promptly: If you encounter any faults or questions while driving, note them down and inform the staff during the first maintenance registration so that the technician can inspect all issues during the service.

11

4

Share

What is the EV and HEV mode switching of BYD Qin?

BYD Qin EV automatically switches to HEV mode, and the vehicle cannot be charged. Cause analysis: On-board charger, circuit battery pack, DC-DC, PTC, electric air conditioning pump, wiring harness failure. Troubleshooting process: Use the VDS diagnostic tool to read the information of each module. Only the battery management system reports the P1A3400 pre-charge failure fault. The data stream shows the current total voltage of the battery pack is 444V, the minimum single-cell battery voltage is 3.464V, and the maximum single-cell battery voltage is 3.485V. The pre-charge status is not pre-charged. The high-voltage distribution box of this vehicle is built inside the power battery pack. According to the circuit diagram, disconnect the low-voltage connector B28 of the power battery pack and measure the voltage of pin 4 (pre-charge contactor power supply) as 12.86V. It is preliminarily ruled out that the pre-charge failure fault is caused by the low-voltage circuit.

19

1

Share

Where is the high-pressure fuel pump located on the BMW X5?

The high-pressure fuel pump on the BMW X5 is located on the engine block, while the fuel pump is situated under the right rear seat. Fuel Pump Introduction: The fuel pump is a lightweight and compact pump, categorized into three main types: in-line, distributor, and unit pumps. The fuel pump requires a power source to operate, and its lower camshaft is driven by the engine crankshaft gear. Fuel Pump Mechanical Principle: The suction and pressurization of the fuel injection pump are accomplished by the reciprocating motion of the plunger within the plunger sleeve. When the plunger is in the lower position, the two oil holes on the plunger sleeve are open, connecting the inner cavity of the plunger sleeve with the oil passage in the pump body, allowing fuel to rapidly fill the oil chamber. When the cam pushes against the roller of the roller body, the plunger rises. The upward movement of the plunger continues until the oil hole is blocked by the upper end face of the plunger.

7

0

Share

What is the displacement of Audi 35 TSI?

What is the fuel consumption per 100 kilometers for a 1.8L displacement car?

What is the difference between Tesla AP and adaptive cruise control?

Which Brand Do the Hydrogen-Powered Vehicles at the Winter Olympics Belong To?

Should You Drive at High Speed Before or After the First Maintenance?

What is the EV and HEV mode switching of BYD Qin?

Where is the high-pressure fuel pump located on the BMW X5?

How many meters away should the warning sign be placed from the direction of oncoming traffic for a broken-down vehicle?

What is the fuel consumption of the Chery Arrizo 5?

What is Auto-Start Management?

What is the difference between 19-inch and 20-inch wheels?