What is the displacement of 380?

1 Answers
ElenaLee
07/29/25 2:10pm
380 refers to a 2.0-liter displacement. Displacement refers to the total volume of air and fuel mixture that can be delivered to all cylinders during one complete cycle of the engine's operation. It also represents the volume displaced by a piston moving from one stroke to another. Taking the Passat 2021 380TSI Luxury Edition as an example, in terms of powertrain, it is equipped with a 2.0T turbocharged engine, delivering a maximum power of 162 kW and a peak torque of 350 Nm. Its dimensions are 4933 mm in length, 1836 mm in width, and 1469 mm in height, with a wheelbase of 2871 mm. The curb weight is 1595 kg, and the body structure is a 4-door, 5-seater sedan.
Was this review help?
20
0
Share
More Forum Discussions

What Causes Idle Shaking When AC is On?

Reasons for idle shaking when AC is on are as follows: Excessive Carbon Deposits: Severe carbon buildup in the engine cylinders can lead to clogged spark plugs and valves, directly causing the car to shake at idle. If the vehicle's acceleration performance has significantly declined and the shaking persists, an engine cylinder cleaning may be necessary. Fuel Supply System Malfunction: Unstable fuel pressure can cause inconsistent air-fuel mixture concentration, resulting not only in shaking but also unstable idle. Consider replacing the fuel filter first, as prolonged use may clog the filter element. Then check the fuel pressure bypassing the fuel filter; if abnormal, the issue may lie with the fuel pump. Engine Mount Deterioration: This is also a very common cause of shaking. If the engine shaking worsens over time but the power output does not weaken accordingly, it may be due to worn engine mounts.
14
4
Share

Why does the Volkswagen start-stop function fail?

Reasons for the failure of Volkswagen's start-stop function include the seat belt not being fastened; the driver's door not being closed; the battery temperature being too high or too low; the vehicle being on a steep slope; the cabin being heated or cooled and not yet reaching an acceptable temperature; the HVAC system being set to full defrost mode with the blower at high speed; the engine not yet reaching normal operating temperature, or the transmission not being in forward gear. Below is an expanded introduction: 1. Introduction to the start-stop system: The start-stop system, translated as the Start-Stop system in English, is when the vehicle is in a stopped state (not in park), the engine will pause operation (instead of maintaining traditional idle speed). During this pause, the lubricating oil inside the engine continues to circulate, keeping the engine internally lubricated. When the brake pedal is released, the engine will start again. 2. Advantages of the start-stop system: Because the lubricating oil keeps circulating, even with frequent stops and starts, it will not cause wear to the internal parts of the engine.
8
0
Share

Can I practice driving during the National Day holiday?

You can practice driving during the National Day holiday, as long as the driving school has arranged for instructors to work during the holiday, allowing students to train on new driving subjects. Benefits of practicing driving during National Day: Students can practice driving during the Mid-Autumn Festival or National Day holidays, but it depends on whether the driving school has arranged for instructors to be on duty during these two holidays. If there are instructors on duty, students can apply to practice at the driving school's training ground. If the on-duty instructor happens to be the one teaching you, it is naturally a better choice, as it can maintain your original learning progress. Notify in advance for holiday practice: Inform the on-duty instructor about your current learning progress and the projects you are roughly training on, and then let the on-duty instructor make the arrangements. Different instructors have different styles, so try to maintain good communication. If there are any issues, you can speak up directly. If the problem cannot be resolved, you can also contact your original instructor for clarification, so there won't be any issues.
4
3
Share

Can an automatic transmission car be pushed if it runs out of gas?

"An automatic transmission car cannot be pushed if it runs out of gas, because automatic transmission cars use automatic clutches, which are hydraulically adjusted. When the car is not running, the automatic clutch plates are in a locked position, and forcing it to move may shatter the automatic clutch gears. Issues that may arise if an automatic transmission is low on oil: If the automatic transmission fluid is insufficient or the oil level is too low, the automatic transmission will not be able to shift gears automatically. It is necessary to regularly check the automatic transmission fluid level. Lack of oil in the automatic transmission can affect the oil pressure, leading to damage to the clutch plates and wear on the transmission. Introduction to automatic transmission fluid: Automatic transmission fluid is a special high-grade lubricant that not only provides lubrication and cooling but also transmits torque and hydraulic pressure to control the operation of the automatic transmission's clutches and brakes. Generally, automatic transmission fluid should be replaced every 50,000 kilometers. However, if the fluid level is found to be low during inspection, it must be topped up."
4
0
Share

Will the Car Roll Away If the Handbrake Is Engaged?

Under normal circumstances, if the handbrake is fully engaged, the car should not roll away. If this happens, it is mostly due to a faulty handbrake or insufficient tightness. Introduction to the Handbrake: The professional term for the handbrake is auxiliary brake. Unlike the principle of the main brake, it uses a steel cable connected to the rear brake shoes to apply braking force to the car. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, long-term use will reduce its effectiveness and increase the handbrake's travel distance. Precautions for Using the Handbrake: The handbrake is a frequently used system. Only proper and correct usage can ensure smooth operation in the future, especially for the most common mechanical handbrakes. It is essential to follow the correct method—do not engage the handbrake before the car has come to a complete stop, as this practice is unnecessary. Using it sparingly ensures good performance, which is crucial for safety. Additionally, it can extend the adjustment cycle and reduce maintenance and replacement costs.
5
2
Share

Where is the front tow hook on the Audi Q5L?

Audi Q5's tow hook is located at the lower part of the rear bumper, near the exhaust pipe. The tow hook is also known as a tow ball, ball-type rear tow hook, or tow bar/tow rod. In a broad sense, the tow ball refers to a complete towing system consisting of three parts: fixed bracket, ball body, and wiring harness (power control unit). More details are as follows: 1. Methods for handling undrivable vehicles: Normally, vehicles can rely on their own engine power output to move. However, in emergency situations such as engine failure or a vehicle stuck in a swamp, owners may need assistance from another vehicle's power to move. In such cases, tow hooks are commonly used as a solution. The purpose of tow hooks is straightforward - they are designed for towing and rescuing trapped vehicles. 2. Towing precautions: Generally, there are several precautions owners should be mindful of during towing. First, the tow rope should be a specialized tow rope made of materials like cloth straps or steel wires, typically 3-10 meters long, capable of bearing at least 2 tons of weight to ensure smooth towing. Second, if the towed vehicle loses steering capability, a metal tow bar approximately 1.8 meters long should be used to maximize stability during the towing process.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.