What is the displacement of 35tfsi?

3 Answers
MacElizabeth
07/24/25 5:36am
35tfsi has a displacement of 2.0L. TFSI is Audi's patented technology, which refers to "Turbocharged Fuel Stratified Injection engine". The stratified combustion technology must rely on direct injection in the cylinder. TFSI is essentially an FSI engine with turbocharging, abbreviated as TFSI, which stands for Fuel Stratified Injection. TFSI is a fuel supply technology for engines, where fuel is injected into the cylinder to ensure complete combustion and energy release, thereby driving the vehicle. FSI stands for Fuel Stratified Injection, a technology that is part of the engine's lean combustion technology.
Was this review help?
13
5
Share
ChaseLynn
08/10/25 11:36pm
I've been pondering Audi's naming system recently, which is quite fascinating. Many new car owners often misunderstand the number '35' in 35 TFSI, assuming it refers to a 3.5-liter large-displacement engine, but that's not the case. Audi changed its strategy a decade ago—these numbers now represent performance levels rather than actual displacement. The 35 TFSI typically comes with a 1.5-liter turbocharged engine, delivering around 150 horsepower and approximately 250 Nm of torque, offering smooth acceleration. It's commonly found in the A3 series or Q3 SUV, with excellent fuel efficiency—a full tank can last about 500–600 kilometers in city driving. I once drove a friend's A3 Sportback 35 TFSI, and it responded swiftly on the highway with precise throttle input, while noise control was impeccable—a testament to the refined tuning of German engineering. This coding system better aligns with the current trend of small-displacement, high-power engines, avoiding the limitations of the era when displacement alone was the highlight. If you're car shopping, don't be misled by the numbers—focus on experiencing its driving feel and fuel efficiency. In short, this system helps family car buyers more intuitively select their desired performance level.
Was this review help?
5
5
Share
Expand All
McEmmanuel
09/24/25 6:53am
I've been driving Audi cars for several years, especially the 35 TFSI model. When I first bought the car, I was also confused about whether 35 represented a large displacement. Later, a knowledgeable friend told me that this is actually a performance identifier. Typically, it's a 1.5-liter engine with quick turbocharging response, producing between 145 to 155 horsepower. For my daily commute with the A3 35 TFSI, the average fuel consumption is controlled at around 6-7 liters per 100 kilometers, which is more economical than larger displacement cars. The initial response is good, and it handles uphill driving without any pressure. The downside is that overtaking on highways feels a bit soft, but for city commuting, it's absolutely sufficient. I recommend new owners to test drive more to feel the performance rather than just focusing on the numerical code. Maintenance isn't expensive either, with an oil change every six months being sufficient. Remember, this 35 is more of a summary of the engine's overall capabilities, with displacement being just one part of it. Choosing it is mainly for its economic efficiency and convenience, making it very suitable for short trips or family use.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

What is the wading depth standard for pure electric vehicles?

Pure electric vehicles have a wading depth standard of 15cm. Below is an introduction to the wading standards and local standards: Introduction to wading standards: The wading standards mainly include the national standard GB 18487.3, which primarily references ISO 6469.3. This standard is a comprehensive consideration by various countries. Beijing and Shanghai each have their own local standards. According to the promotion requirements, GB 18483.1 specifies a water depth of 10CM, which does not account for extreme conditions during consideration. Local standard requirements: According to the DB31T634-2012 standard, the simulated wading test involves driving in a 15cm deep water pool at a speed of 30±3 km/h for a total wading time of 10 minutes, and driving forward and backward in a 30cm deep water pool at a speed of ≥5 km/h for a total wading time of 10 minutes.
4
0
Share

Can a sedan accommodate 4 adults and 2 children (6 people in total)?

No, it cannot carry six people as it constitutes overloading. Here are the relevant details: 1. Overloading: Refers to when a transportation vehicle's actual load exceeds the maximum permitted limit. Freight overloading typically means the cargo transported by motor vehicles exceeds the vehicle's loading capacity. 2. Penalties for overloading: Any vehicle exceeding 20% of the approved passenger capacity is considered overloaded and will be penalized under new traffic regulations. The new regulations have increased penalty points for serious overloading violations by drivers of key vehicle types: Operating a commercial passenger vehicle exceeding 20% of approved capacity results in 12 penalty points; operating a commercial passenger vehicle exceeding capacity by less than 20%, or operating other passenger vehicles exceeding 20% of approved capacity results in 6 penalty points. Operating passenger vehicles (excluding commercial buses and school buses) exceeding capacity by less than 20% results in 3 penalty points.
11
4
Share

What is the minimum and maximum speed for straight-line driving?

Straight-line driving speed should be between 30 km/h and 40 km/h, meaning it should not be lower than 30 km/h or higher than 40 km/h. Below are some relevant techniques for straight-line driving: Selecting a reference point: When driving straight, the driver should look ahead and pay attention to both sides, choose a reference point, maintain straight-line driving, correct the direction in time, and always be aware of various traffic conditions ahead to detect and handle them promptly. Adjusting the viewing distance ahead in time: Look far and near while holding the steering wheel straight. The driver should adjust the viewing distance ahead according to the speed. At higher speeds, look further ahead; at lower speeds, look appropriately closer, and use peripheral vision to monitor the surroundings. Steering smoothly: Operate the steering wheel by pulling with one hand and pushing with the other, ensuring smooth control. Keep both hands shoulder-width apart and avoid using excessive force.
13
2
Share

How to Set the Toyota RAV4 Lock Beep?

Toyota RAV4 lock beep setting method is as follows: 1. After sitting in the driver's seat, step on the RAV4's brake pedal and put the gear in the P position; 2. After releasing the brake pedal, press the RAV4's one-touch start button twice consecutively. Note that there should be a certain interval between these two button presses to give the vehicle system time to react. 3. After closing all doors, hold down the lock button on the driver's side door for more than 10 seconds. Relevant information is as follows: 1. The lock beep function can confirm whether the motor vehicle is locked, providing a certain safety effect. 2. The lock beep sound of a motor vehicle is used to remind the driver that the vehicle is locked. If the original vehicle is not equipped with this feature, it can be modified later. After modification, the vehicle can have a lock beep sound, which will prompt the driver when locking the vehicle, making it convenient for the driver to know the vehicle's status.
7
4
Share

What brand is GAC Trumpchi?

GAC Trumpchi is the first independently developed model by GAC Group, positioned in the mid-to-high-end market. GAC Trumpchi possesses the capability to compete with joint-venture vehicles in terms of technology, configuration, and quality. As a pioneer among domestic brands, it continues to impact the mid-to-high-end automotive market. Currently, GAC Trumpchi has established sales and service channels in 14 countries. Below are additional details: 1. Introduction: GAC Trumpchi is a wholly-owned subsidiary established by Guangzhou Automobile Group Co., Ltd. It is a high-tech enterprise dedicated to the research and development of complete vehicles, engines, automotive accessories, and automotive engineering technologies. Founded on July 21, 2008, its headquarters is located in Panyu District, Guangzhou. Products include the Trumpchi series of sedans and SUVs. 2. Brand Culture: GAC Trumpchi is GAC Group's first independently developed model, targeting the mid-to-high-end market. Adhering to the brand philosophy of 'Building good cars for loved ones and filling the world with love,' it integrates the resources and experience of GAC Group, insists on independent innovation, and is committed to developing vehicles suitable for Chinese driving habits and road characteristics.
6
1
Share

How to Distinguish Between Four-Wheel Drive and Two-Wheel Drive in Audi A6?

Audi A6 distinguishes between four-wheel drive and two-wheel drive as follows: If the rear emblem has the word 'quattro', it is four-wheel drive. If the rear emblem does not have the word 'quattro', it is two-wheel drive. The Audi A6 is a mid-to-large-sized car under the Audi brand, equipped with three types of engines: a low-power version 2.0-liter turbocharged engine, a high-power version 2.0-liter turbocharged engine, and a 3.0-liter turbocharged engine. Below are the details about the engines: 1. The low-power version 2.0-liter turbocharged engine has a maximum power of 140kw and a maximum torque of 320 Nm. 2. The high-power version 2.0-liter turbocharged engine has a maximum power of 180kw and a maximum torque of 370 Nm. 3. The 3.0-liter turbocharged engine has a maximum power of 250kw and a maximum torque of 500 Nm.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.