What is the dismantling tutorial for the 2018 Emgrand center console?
3 Answers
The dismantling tutorial for the 2018 Emgrand center console is as follows: 1. First, insert the pry tool into the gap above the center console of the Geely New Emgrand to loosen the cover plate. 2. Next, remove the cover plate above the center console of the Geely New Emgrand. 3. Then, use the pry tool to open the air vent on the center console of the Geely New Emgrand. 4. Finally, after removing the air vent of the Geely New Emgrand vehicle, the center console of the New Emgrand vehicle can be completely dismantled. Relevant information about the car center console is as follows: 1. The car center console is where comfort and entertainment devices such as air conditioning and audio are controlled. 2. The car center console includes the central control door lock system, allowing the driver to control the opening and closing of all doors and the window lifting system through the car center console.
To disassemble the 2018 Emgrand's center console, first prepare the tools: a Phillips screwdriver and a plastic pry bar to prevent scratching the interior. I always start by disconnecting the negative terminal of the car battery to avoid accidental short circuits—safety first. Then, begin with the side panel under the dashboard, pry open the small cover, and remove the hidden screws one by one. Next, gently start from the bottom edge of the center console, applying even force with the pry bar—avoid pulling too hard to prevent breaking the clips. Once the panel is loose, pay attention to the wiring connectors behind it: pinch the small clips on both ends and slowly pull them out to avoid damage. The entire process should be steady; I often take over ten minutes to ensure all parts remain intact. When reassembling, align the panel properly, press it into place, secure the screws, and finally reconnect the battery for testing. Don’t forget to refer to the user manual—it helps identify hard-to-find screw points. DIY saves money, but caution is key.
As a young car enthusiast who loves tinkering, disassembling the center console of a 2018 Emgrand is pretty straightforward. Grab a screwdriver and plastic pry tools, and start by turning off the power to avoid damaging the car. First, pry open the small panel on the side of the steering wheel, remove the screws, then gently slide the pry tool into the bottom gap—the panel pops right off with a little leverage. Avoid using brute force to prevent scratching the interior. Carefully disconnect the cable connectors, minding the clips, and once removed, you can access the internal structure for potential audio upgrades or modifications. Take your time—I spent about 20 minutes on my last disassembly without issues. Before reassembly, double-check all connections to prevent rattles. DIY is fun, but if unsure, team up with a buddy. With the right tools and gentle handling, it’s a smooth process.
