What is the disassembly method for the 13 Lavida key?
2 Answers
Here is the disassembly method for the 13 Lavida key: 1. Prepare the 13 Lavida car key. 2. Separate the smart key and the mechanical key. You can pull the key apart with force on both sides or use a screwdriver to pry it open. The screwdriver should be inserted into the gap inside the key where it retracts. 3. Use your hands to separate the part with the circuit board and the part with the battery from the middle of the key's circuit board. 4. After separation, carefully remove the battery from the panel and replace it with a new one. Finally, reassemble the key in reverse order of the original steps. Additional information: The remote key for the Volkswagen Lavida utilizes the wireless remote control function of the central locking system, allowing you to remotely unlock and lock the doors without inserting the key into the lock.
I've handled quite a few Lavida key disassemblies, mainly the smart keys from the 2013 model. The method is quite simple: First, use your fingers to remove the mechanical key part at the bottom of the key, revealing a small gap. Then, use a thin plastic sheet or credit card to slowly pry open the shell—never use metal tools, as they can easily scratch it. Once opened, you'll see the battery holder, usually a CR2032 coin cell. When replacing the old battery with a new one, make sure to align the positive and negative poles and snap it in place. Finally, press the shell back together and test the unlocking function. The whole process takes less than ten minutes, and doing it yourself saves time and money. It's recommended to check the battery life every two years—don't wait until it's dead to take action, or you might get stuck outside. Remember to wash your hands before disassembling to avoid stains affecting the internal circuitry—this is a practical tip to ensure you complete the task safely.
