What is the difference between yellow license plates and blue license plates?

2 Answers
JuliaDella
07/29/25 1:56am
The differences between yellow license plates and blue license plates are: 1. Different requirements for driver's licenses: Yellow license plate vehicles can only be driven with a B-class license or above; Blue license plate vehicles can be driven with a C-class license or above. 2. Different traffic restrictions: Yellow license plate vehicles require a traffic permit to enter urban areas; Blue license plate vehicles can directly enter urban areas. 3. Different applicable vehicle types: Yellow license plates are used for large vehicles, trailer license plates, ordinary motorcycle license plates, low-speed vehicle license plates, and ordinary M2-class light buses; Blue license plates are used for general passenger vehicles, M1-class light passenger vehicles, light trucks with a load capacity of less than 1.0 tons, and light motorcycles. 4. Different requirements for operating permits: Yellow license plates require an operating permit; Blue license plates do not require an operating permit.
Was this review help?
17
3
Share
JustinDella
08/12/25 5:59am
I found that the main difference between blue and yellow license plate vehicles lies in their vehicle types. As an ordinary car owner driving a compact blue-plate car, I use it for daily commuting. It's lightweight and agile, making it quick and stable for city driving. Yellow-plate vehicles are completely different – those large trucks or buses with yellow plates are much heavier, slower to accelerate, and require longer braking distances. I once drove alongside a yellow-plate vehicle on the highway and noticed they're noisier and more likely to obstruct visibility. Beyond appearance differences, blue-plate cars typically only require a C1 driver's license, have lower insurance premiums, and more affordable toll fees. Yellow-plate vehicles need at least a B2 license, come with higher costs, and face more traffic restrictions. In summary, I always pay extra attention to yellow-plate large vehicles while driving – safety comes first, especially at intersections where I make sure to yield in advance when turning.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

How to Replace Coolant in ix35?

Here are the steps to replace the coolant in ix35: 1. Unscrew the radiator cap, open the radiator drain valve (usually located at the bottom of the car), and drain the coolant. 2. Clean the cooling system by continuously injecting clean water into the engine cooling system. During the flushing process, keep the engine idling to maintain the circulation of clean water inside until clear water flows out from the radiator. 3. Stop adding water, wait for the water to drain completely, and then close the drain valve. 4. Add new coolant until the liquid level reaches between the MAX and MIN marks. 5. Close the cap, start the car, and let the engine idle for two to three minutes. The cooling system will expel internal air, causing the coolant level to drop slightly. At this point, you should add more coolant to top it up.
8
2
Share

What does it mean when the Mazda Axela water temperature gauge lights up?

Mazda Axela does not have a water temperature gauge, only a water temperature warning light. A blue warning light indicates that the vehicle's water temperature is too low; a red light indicates that the water temperature is too high. More information about the Mazda Axela water temperature gauge is as follows: 1. The water temperature gauge displays the coolant temperature, helping the owner understand the vehicle's condition. When the car's water temperature is too high, the owner should stop and wait for the water temperature to drop to normal before continuing to drive. 2. Reasons why the water temperature gauge does not move: The power line of the water temperature gauge is broken; the heating coil of the water temperature gauge is burned out; the heating coil of the water temperature sensor is burned out or the contact is poor; the wiring of the water temperature sensor is faulty or broken; the stabilizer that supplies stable power to the water temperature gauge circuit is damaged.
20
4
Share

What engines does the Kia KX7 have?

The engine of the Kia KX7 is produced by Shandong Rizhao Weiya Automotive Engine Manufacturing Co., Ltd., which is a domestic engine. The engine model of the Kia KX7 is G4KH, with a maximum power of 177kW, a maximum torque of 353Nm, and a maximum horsepower of 241. For daily maintenance of the Kia KX7 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid failures, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When the oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to bypass through the bypass valve and still carry dirt back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder generated by part wear to form sludge. A small amount of sludge remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.
3
0
Share

What is the body length of the Avalon?

The specific body dimensions of the 2019 Avalon are: length 4980mm, width 1850mm, height 1440mm, and a wheelbase of 2870mm. More information about the Avalon is as follows: 1. The Avalon is a mid-size sedan with a large body size and a relatively luxurious interior. 2. The Avalon is designed to replace the Crown. 3. The Avalon is equipped with two engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. 4. There is also a hybrid version of the Avalon, which is equipped with a 2.5-liter naturally aspirated engine.
8
0
Share

How many seats does the Porsche 911 have?

The Porsche 911 comes in both 4-seat and 2-seat configurations. The coupe version typically has four seats, with two seats in the rear. More information about the Porsche 911 is as follows: 1. The Porsche 911 is a sports car produced by Porsche AG of Stuttgart, Germany, designed by Ferdinand Alexander Porsche. 2. Since its debut in 1963, it has gone through seven generations. Renowned for its unique style and excellent durability, the Porsche 911 series is one of the most legendary models of Porsche, Germany, and even the world. It is also one of the representative models of mid-rear engine sports cars. However, the air-cooled engine 911 reached its final era with the 993 model, as air-cooled engines are not suitable for sale worldwide, especially in regions with higher temperatures such as subtropical and tropical areas.
13
1
Share

What does Chevrolet 330T mean?

Chevrolet 330T means: a compact car equipped with a low-power version turbocharged engine with a torque of 250NM-300NM. The first digit represents the vehicle class: 3 for compact, 5 for mid-size and large; the second digit represents the engine torque range: 3 for torque between 250 and 300nm, 5 for torque between 300 and 500nm; the third digit represents the engine version: 0 for low-power version engine, 5 for high-power version. T stands for turbocharging. A turbocharged engine refers to an engine equipped with a turbocharger, which is essentially an air compressor that increases intake air volume by compressing air. The main function of turbocharging is to increase the engine's intake air volume through the turbocharger, thereby improving the engine's output power and torque. The automobile engine is the device that provides power for the car and is also the heart of the car. It determines the car's power, economy, stability, and environmental friendliness. Chevrolet models include: Equinox, Malibu, Cavalier, Cruze, Trax, Trailblazer, Orlando, etc.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.