What is the difference between Wuling Red Logo and Silver Logo?

Is it necessary to go to a 4S shop for new car maintenance?

It is recommended to go to a 4S shop for new car maintenance. New cars usually come with an initial maintenance period. If maintenance and repairs are not performed at a 4S shop during the warranty period, it may lead to disputes and complications when returning to the 4S shop for repairs if issues arise. The following are the items typically included in the initial maintenance of a car: 1. Change the engine oil. 2. Replace the oil filter. 3. Check if all lubricants in the engine compartment are sufficient. 4. Inspect the tires for normal wear. 5. Check the vehicle's lighting system. 6. Examine the vehicle's undercarriage for any impacts, rust, or loose components.

16

3

Share

How to Deal with a Swollen Battery?

A swollen battery cannot be repaired, and repair is not recommended. It is advised to replace it directly. Below is additional information about batteries: 1. Hazards of a swollen battery: A swollen battery can easily lead to reverse polarity later on—meaning the positive terminal becomes negative, and the negative terminal becomes positive. This can cause the charger to burn out, damage the controller, and, most seriously, if the controller and charger's protective functions are not comprehensive enough, it may even result in a vehicle fire. 2. Causes of battery swelling: Battery swelling is one of the common causes of battery failure, often appearing as bulging on both sides. The main reasons are excessive charging or discharging currents, leading to a rapid rise in the battery's internal temperature, inadequate venting, and pressure buildup to a certain level, causing swelling or deformation. If a swollen battery is discovered, it should be repaired as soon as possible. During the repair process, the charging system's working condition should be checked to ensure the charging voltage and current are within reasonable limits, and that the generator and charging circuit are functioning properly.

11

4

Share

How to Set the Maintenance Mileage for BAIC Senova?

There are two methods for setting the maintenance mileage for BAIC Senova. Below are the relevant instructions: 1. Manual reset method: Turn on the ignition switch, press the MENU button on the multifunction steering wheel, and locate the maintenance information. Enter the maintenance information, hold down the ENTER key for 30 seconds, and select 'Yes' when the reset option appears. The manual maintenance reset is now complete. 2. Visit a repair facility to perform the maintenance reset using specialized diagnostic equipment. Do not reset the maintenance display between maintenance cycles to avoid incorrect display. The maintenance reminder function is only an auxiliary tool; the detailed maintenance intervals should still follow the maintenance regulations. If the car battery is disconnected for an extended period, the system may not correctly calculate the next maintenance due date.

15

0

Share

How often should the tires on a Nissan Sylphy be replaced?

Under normal circumstances, the lifespan of tires is generally 3-5 years. However, in reality, the lifespan of tires is not fixed and can be judged from three aspects. Here is the relevant information about tire replacement for the Nissan Sylphy: 1. Tread wear approaching the wear indicator: The wear indicator height for general passenger car tires is 1.6 millimeters (this height is also the legally mandated minimum groove depth for tires), while the wear indicator height for load-bearing tires is 2.4 millimeters. 2. Tire damage such as cracks or bulges: Tire damage includes tread cracks, tread bulges, missing tread rubber, severe sidewall wear, and multiple punctures by foreign objects. Especially in the case of bulges, the tire is at risk of bursting at any time. As soon as any of these damages are noticed, the owner should promptly visit a professional tire shop to have the vehicle's tires inspected and replaced if necessary. 3. Tire age expiration: The main sign of tire aging is surface hardening, followed by the appearance of cracks. Aged tires lose their elasticity, and continued use can lead to tread deformation, posing a risk of tire blowout.

12

4

Share

Which engine model does the Tiguan use?

The Tiguan's engine is produced by the Dalian Engine Plant and is a domestically manufactured engine. The Tiguan's engine model is the third-generation EA888. The low-power version has a maximum horsepower of 186, a maximum power output of 137 kW, and a maximum torque of 320 Nm. The high-power version has a maximum horsepower of 220, a maximum power output of 162 kW, and a maximum torque of 350 Nm. For daily maintenance of the Tiguan's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, ensuring the selected standard meets or exceeds the manufacturer's requirements. Regularly change the engine oil and oil filter. The quality of any lubricating oil will degrade over time with use. After a certain mileage, its performance deteriorates, which can lead to various engine issues. To prevent malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear, forming sludge. In small amounts, the sludge remains suspended in the oil, but in large quantities, it precipitates, clogging filters and oil passages, making engine lubrication difficult and leading to wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates smoothly but also extends the overall lifespan of both the radiator and the engine.

20

5

Share

What to Do If the ETC Falls Off Accidentally?

You need to take the ETC device and relevant materials to the bank and ask the staff to reinstall it. If the ETC device falls off accidentally, the small dot on it will pop out, causing the vehicle owner's information and data to be lost. The ETC will also lose its function of automatic toll collection. Precautions for Using ETC: The ETC transaction sensing range is 8 meters. When the vehicle in front stops, to prevent the ETC device of the front vehicle from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the front vehicle to avoid automatic sensing and paying the toll for the front vehicle. The speed limit for ETC lane recognition is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, which will also result in toll deduction failure. Unauthorized removal or movement of the OBU device, detachment or loosening of the ETC electronic tag, etc., will cause the electronic tag to become invalid. It can be sent to the bank where the ETC card was issued or the highway service office for inspection. If the detachment or loosening is not caused by human factors, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also lead to toll deduction failure. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. If the car's windshield is too thick, it may cause poor signal reception. This is especially important for vehicles that have had their windshields replaced after an accident or for those who have modified their front windshields.

10

1

Share

What is the difference between Wuling Red Logo and Silver Logo?

Is it necessary to go to a 4S shop for new car maintenance?

How to Deal with a Swollen Battery?

How to Set the Maintenance Mileage for BAIC Senova?

How often should the tires on a Nissan Sylphy be replaced?

Which engine model does the Tiguan use?

What to Do If the ETC Falls Off Accidentally?

How to License a Motorcycle Without Proper Documentation?

Can I Schedule a Driving Test on Saturdays and Sundays?

How to Replace a Lost License Plate?

Where is the car air conditioning switch located?