What is the difference between Volvo B4 and B5?

1 Answers
MacEmersyn
07/29/25 8:06pm
The differences between Volvo B4 and B5 are as follows: 1. Different levels: The Volvo B4 is classified as a mid-to-large-size car; the Volvo B5 is classified as an SUV. 2. Different dimensions: The width and height of the Volvo B4 are 5090mm, 1879mm, and 1450mm respectively; the length, width, and height of the Volvo B5 are 4953mm, 1958mm, and 1776mm respectively. 3. Different transmissions: The Volvo B4 has an 8-speed AT transmission; the Volvo B5 has an 8-speed automatic manual transmission. 4. Different engines: The Volvo B4 is equipped with a 2.0T turbocharged engine plus an electric motor; the Volvo B5 is equipped with a 2.0T mechanical and turbocharged engine.
Was this review help?
9
5
Share
More Forum Discussions

Can Modified Projector Headlights Pass Vehicle Inspection?

As long as the modified projector headlights meet the lighting inspection standards, they can pass the annual vehicle inspection. Nowadays, as long as the projector modification follows the standardized procedures, it can generally pass the inspection. Period: There will be no penalty for being one day overdue. Vehicles that exceed the inspection period by less than one year can undergo a supplementary inspection procedure at the vehicle management department without facing penalties. However, if the inspection period is exceeded by more than one year, a penalty of 3 demerit points will be imposed, and the vehicle may be temporarily impounded. Penalty: For motor vehicles driven on the road without displaying the inspection compliance label, the vehicle may be impounded, and 1 demerit point will be deducted. If compulsory traffic insurance is not purchased, a penalty of twice the insurance premium will be imposed.
15
4
Share

At what fuel level should you refuel?

It is best to refuel when the fuel level drops to 1/4. Specific explanations are as follows: 1. If there is too much remaining fuel, gasoline may overflow during refueling, and if accidentally exposed to a spark, it could trigger a severe fire. Overfilling the tank can also harm the car, such as increasing the vehicle's load. Do not wait until the tank is empty to refuel, as this may damage the fuel pump cooling system. Refuel when the fuel level reaches 1/4, but do not fill beyond 3/4 of the tank's capacity. 2. Different cars have varying fuel warning levels; some trigger an alert when the remaining range is 100 km, while others do so at 150 km. Therefore, it is essential to know your car's fuel warning range and refuel promptly. During long-distance driving, plan your refueling stops according to your itinerary.
8
3
Share

What Position Should the Rearview Mirrors Be Adjusted to for Subject Two?

For Subject Two, adjust the rearview mirrors to the highest position where you can just see the rear door handle. This is particularly helpful for parallel parking, reversing into the garage, and the hill start test. Here are the relevant details: 1. For the left rearview mirror, adjust the vertical position so that the distant horizon is centered, and the horizontal position so that the car body occupies one-fourth of the mirror's surface. For the right rearview mirror, adjust the vertical position to show a larger area of the ground, about two-thirds of the mirror's surface, and the horizontal position similarly so that the car body occupies one-fourth. 2. Before starting, always fasten your seatbelt and adjust the seat (the seatback angle greatly affects the rearview mirror visibility). The front door handle should be at the one-third position of the mirror (closer to you), and half of the rear wheel should be visible.
19
4
Share

How to Check the Production Date of a Car Seat Belt?

Pull out the seat belt completely, and you will find a label attached at the very bottom. The production date of the seat belt is indicated on this label. Here is some relevant information: 1. Some seat belts have the date directly printed on them, which is very obvious and can be recognized at a glance. However, some seat belts have labels that are cluttered with English text, making it difficult to spot the date at first glance. In such cases, if you see the letters 'MFD-DATE,' the following information is the production date, as 'MFD-DATE' stands for manufacturing date. 2. If 'MFD-DATE' is followed by a combination of letters and numbers, it means the 17-digit coding rule is being used, which is the Vehicle Identification Number (VIN). The tenth digit of the VIN is related to the date, following a 30-year cycle.
16
1
Share

What is the ground clearance of the Volkswagen Lamando?

The ground clearance of the Volkswagen Lamando is 114 millimeters. Ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to indicate the car's ability to pass over obstacles such as rocks and tree stumps without collision. The Volkswagen Lamando is a compact car. Taking the 2021 Volkswagen Lamando as an example, its body dimensions are: length 4615 mm, width 1826 mm, height 1425 mm, with a wheelbase of 2656 mm and a fuel tank capacity of 51 liters. The 2021 Volkswagen Lamando is equipped with a 1.4T turbocharged engine, with a maximum power of 96 kW and a maximum torque of 225 Nm, paired with a 7-speed dual-clutch transmission.
3
3
Share

What is the process for buying a car?

The car buying process is as follows: 1. After selecting the desired vehicle, first pay a deposit or the full amount, and wait for the 4S store to customize the vehicle according to your needs. 2. Then go to the local Administration for Industry and Commerce Motor Vehicle Management Office to have the purchase invoice stamped with the industrial and commercial inspection seal. Additionally, necessary insurances such as compulsory traffic insurance, vehicle damage insurance, third-party liability insurance, and onboard liability insurance should be processed. 3. While handling the insurance, you also need to pay the vehicle purchase tax, which is 10% of the vehicle price for domestic cars and 10% of the dutiable value for imported cars. When picking up the car, be sure to verify all items and fees, inspect the vehicle's appearance and functions, and check if all documents are complete. Finally, register the vehicle and pay the road maintenance fee.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.