What is the Difference Between Turning and U-turning?

1 Answers
StNorah
07/29/25 9:49am
Here is an introduction to the differences between turning and U-turning: 1. Turning refers to changing the direction of the car, either to the left or right. 2. U-turning refers to changing the direction of the car by 180 degrees. Additional information: Here are some tips for making a U-turn: 1. If there is a sign or marking prohibiting U-turns at an intersection, U-turns are not allowed; 2. If there is no left-turn lane at an intersection, U-turns are not allowed; 3. If there is no sign prohibiting U-turns at an intersection, U-turns are allowed when the light is green; 4. If there is a dedicated U-turn lane, you can make a U-turn directly without being controlled by any traffic light, as long as it is safe; 5. If there is a U-turn signal at the intersection, follow the U-turn light; 6. If the central dividing line before the stop line at an intersection has a dashed line on the other side, U-turns are allowed regardless of whether the light is red or green.
Was this review help?
7
5
Share
More Forum Discussions

Is it still necessary to install a parking sensor after equipping a car with a reversing camera?

After installing a reversing camera, you can also install a parking sensor. Both are parking assistance devices. The parking sensor can alert the driver to surrounding obstacles through sound or more intuitive displays, while the reversing camera provides a more comprehensive view of the rear situation through real-time images. Precautions for installing a parking sensor: Check the internal structure of the rear bumper for any obstructions, such as the vehicle frame or impact-absorbing foam blocks, and try to avoid installing in these areas. Measure the total distance between the wheel arches at both ends of the rear bumper and mark the precise positions for the four sensors. The spacing between the four sensors should be equal and aligned horizontally. If there is a license plate in the middle, distribute the sensors symmetrically on both sides. The installation surface should not have excessive curvature. Precautions for installing a reversing camera: Ensure all wires are securely wrapped with waterproof tape; the camera must be installed in the correct position; the video cable must be hidden and routed properly; the main unit's installation and wiring should be correct, safe, and aesthetically pleasing.
12
5
Share

How to File an Insurance Claim When You Are Fully Liable for a Rear-End Collision?

When you are fully liable for a rear-end collision, you should immediately contact your insurance company. In this case, the insurance company will cover the compensation. Insurance claim process for rear-end collisions involving police reports and on-site inspections: For minor traffic accidents, first report the incident to the police, then file a claim with the insurance company. Alternatively, you can directly file a claim with the insurance company first. If the collision scene shows no issues, the insurance company can independently determine liability, and traffic police do not need to handle the scene. Additionally, the insurance company's on-site investigator will assess the insurance terms, collect documents such as driver's licenses and ID cards, and other relevant information. Points to note when handling the claim: For minor traffic accidents involving only exterior damage, the insurance company's damage assessor can evaluate the damage on-site and provide compensation for up to three types of damage. For more significant traffic accidents, the vehicle must be taken to a repair shop for disassembly and damage assessment to determine replacement items and labor time. Moreover, the damage assessor must report to higher authorities to verify the reasonableness of the compensation costs.
14
4
Share

Can a Damaged Tire Bead Still Be Used After Installation?

Installing a tire with a damaged bead is not recommended. It is best to replace the damaged tire promptly to avoid potential blowouts. Causes of bead damage: During daily driving, tires are prone to scrapes or punctures, such as rubbing against curbs while parking. This can easily lead to sidewall damage, bulges, or ruptures. A tire bulge occurs when the inner cords of the sidewall break. In such cases, replacing the damaged tire promptly is advisable to prevent blowouts. Tire pressure is crucial to tire longevity—both overinflation and underinflation can shorten its lifespan. Low pressure causes tire deformation, increases sidewall stress, and leads to cracks and excessive flexing. This results in extreme compression forces on the inner layers and tension on the outer layers, exceeding the flex limit. Overheating accelerates rubber aging, weakens the casing ply, and may cause cord breakage. Hazards of a damaged bead: The bead is the inner edge of the tire that seals against the wheel rim. Since the airtightness of tubeless tires relies heavily on the bead's integrity, damage to the bead severely compromises the tire's sealing performance.
11
2
Share

Do New Cars Need Winter Tires in Winter?

New car owners should decide whether to switch to winter tires based on their driving environment. If the driving environment has low temperatures and frequent snowfall, it is recommended to switch to winter tires. If winter temperatures are relatively high, using winter tires is not advised. Definition of Winter Tires: Winter tires are designed for use in snowy conditions. These rubber tires have metal studs to enhance traction and are commonly used in colder regions prone to snow accumulation. When driving on snow-covered roads, winter tires are highly recommended as their tread patterns feature more fine grooves to improve grip. Differences Between Winter Tires and All-Season Tires: Material: The tread of winter tires incorporates special compounds, making them softer than standard all-season tires. The silica-mixed rubber formula in winter tires allows for tighter contact with icy surfaces, generating greater friction compared to all-season tires, thereby significantly improving vehicle control and safety on slippery ice. Below 7°C, winter tires remain softer, ensuring better traction. Appearance: Winter tires have directional and asymmetrical tread patterns. They feature more grooves, meaning a higher proportion of grooves on the tire surface, which enhances water drainage. Common tread patterns include rib patterns, lug patterns, combination patterns, block patterns, and asymmetrical patterns. In contrast, all-season tires have symmetrical tread patterns.
14
0
Share

Is Wheel Balancing Necessary When Changing Car Tires?

Wheel balancing is necessary when changing car tires. Additional information about wheel balancing is as follows: 1. Wheel balancing can only measure the position of the rotor's unbalanced weight and determine the location and size of the balancing weight when the wheel is rotating. 2. Wheel balancing can not only eliminate the dynamic unbalanced couple but also the centrifugal force caused by static imbalance. 3. Regular balancing checks can not only extend the lifespan of car tires but also improve driving stability, avoiding accidents caused by tire wobbling or bouncing at high speeds, which could lead to loss of control.
2
0
Share

Do both parties need to report to insurance after a car accident?

It is not mandatory for both parties involved in an accident to report to insurance. Private settlements don't require insurance company involvement, but if private settlement fails, then reporting to insurance companies becomes necessary. Compensation methods: In a rear-end collision where the other party is fully at fault, the repair costs for both vehicles will be covered by the insurance company of the at-fault party. The involved party can claim compensation from the insurance company by providing: the accident liability determination certificate issued by traffic police, mediation agreement, copies of both drivers' licenses, vehicle registration certificates, and compulsory traffic insurance documents. Claims process: 1. Report the accident: Preserve the accident scene and immediately notify your insurance company after the accident occurs. 2. On-site handling: Traffic police arrive at the scene and issue an "Accident Determination Certificate" on site. 3. Third-party repairs: If the third party involves non-motor vehicles, it's best to request the insurance company representative to facilitate a three-party (third party, insurance company, vehicle owner) agreed damage assessment price during on-site handling. If immediate damage assessment isn't possible, request the insurance company to provide an assessment price during or before the third-party damage evaluation process.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.