What is the difference between the Reiz Big V and Small V?

1 Answers
GenevieveFitz
07/29/25 5:37pm
The differences between the Reiz Big V and Small V are: 1. Different engine displacement: The Reiz Big V has a 3.0L engine displacement, while the Small V has a 2.5L engine displacement. 2. Different wheel sizes: The Reiz Big V has 18-inch wheels, while the Small V has 16-inch wheels. 3. Different power outputs: The Reiz Big V has a maximum horsepower of 227ps, a maximum power of 293kw, and a maximum torque of 230nm; the Small V has a maximum horsepower of 193ps, a maximum power of 120kw, and a maximum torque of 230nm. The Reiz is a model under FAW Toyota, with body dimensions of 4750mm in length, 1795mm in width, 1450mm in height, and a wheelbase of 2850mm.
Was this review help?
20
2
Share
More Forum Discussions

What are the main differences between steel-belted tires and nylon tires?

Differences between nylon tires and steel-belted tires: 1. Different specification codes: Nylon tires: "-" represents nylon tires, and the specification is expressed as 900-16. Steel-belted tires: "R" represents steel-belted tires, and the specification is expressed as 900R16. 2. Different materials: Nylon tires: The main material is nylon, and the sidewall is marked with NYLON. Steel-belted tires: The main material is steel, with a fine steel wire mesh inside the rubber layer of the tire, and the sidewall is marked with STEEL. 3. Different structures: Nylon tires: Bias-ply, old-fashioned structure, with the carcass composed of multiple layers of crisscrossed nylon cord layers. Steel-belted tires: Radial carcass composed of a single layer of radial steel cord layers. The tread is fixed by multiple layers of steel belts, and the functions of the sidewall and tread pattern are relatively independent. 4. Different cord arrangements: Nylon tires: The carcass cords are arranged in a crisscrossed mesh pattern between layers, forming an angle of 35-45 degrees with the circumferential centerline of the tread. Steel-belted tires: The carcass cords are arranged parallel to each other in a radial pattern, forming a 90-degree angle with the circumferential centerline of the tread. 5. Different treads: Nylon tires: The tread is thinner, and the stress is mainly borne by the cord layers of the carcass, with the tread bearing only 10%~20% of the stress. Steel-belted tires: The tread is thicker and has a hard belt layer, capable of bearing 60%~75% of the stress. Advantages and disadvantages of nylon tires and steel-belted tires: 1. Nylon tires: Good longitudinal rigidity, suitable for medium-speed driving on ordinary roads, but the structural design is somewhat unreasonable, affecting development, and they are gradually being phased out. 2. Steel-belted tires: Less prone to punctures, large radial elasticity, good cushioning performance, and higher load capacity, but the sidewalls are thinner and more prone to damage, with poor lateral stability, high manufacturing technical requirements, and high costs.
13
1
Share

What is the fuel consumption of the 2020 VV6?

The fuel consumption of the 2020 VV6 is approximately 10 liters per 100 kilometers. Here are some additional details: 1. The 2020 VV6 is a compact SUV equipped with a new 2.0T engine, delivering a maximum power of 167 kW and a maximum torque of 387 Nm. 2. The engine features direct fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. It is paired with a 7-speed dual-clutch transmission, providing robust performance. 3. The steering wheel offers minimal resistance with a small turning radius and no dead zone. The tires provide strong grip, resulting in minimal body roll during high-speed cornering.
7
0
Share

Is Diesel Engine Lubricating Oil the Same as Engine Oil?

Engine lubricating oil is indeed engine oil. Below is an introduction to engine oil-related content: Increased fuel consumption: When adding engine oil, the oil level should be between the upper and lower limits on the dipstick. If too much engine oil is added, the oil volume will expand as the engine temperature rises, increasing pressure in the oil chamber and operational resistance. This can lead to reduced vehicle power and increased fuel consumption. Overfilling engine oil: Excessive engine oil can cause oil to leak through the crankcase vent pipe, increasing crankcase pressure. The oil seal may loosen due to the oil pressure, resulting in oil leakage. Heat dissipation: Overfilling engine oil can affect engine heat dissipation.
5
4
Share

When Does the Vehicle Radiator Fan Turn On?

Vehicle radiator fans activate when the coolant in the radiator reaches a certain temperature, triggered by a thermal switch. When the coolant temperature rises further, this switch increases the fan speed. The radiator fan cannot be manually controlled as it is governed by the thermal switch mounted on the radiator. Radiator fan speed settings: 1. When coolant temperature reaches 92-95°C, the cooling fan operates at 1600 RPM - this is the low-speed setting; 2. When coolant temperature reaches 105°C, the fan accelerates to 2400 RPM - this is the high-speed setting.
18
0
Share

Which type of reversing camera offers the clearest image?

For high-definition options, consider the 13-series DA-specific camera with CCD HD mode. Below are some key points about reversing: 1. Precautions: Whether you're a novice or experienced driver, this is crucial. Never reverse while pressing the accelerator, and avoid half-braking. Novices should reverse at a speed slower than idle to allow more time to observe surroundings. 2. Basic principles: When parking in a lot, first assess the space's width, check for rear obstacles, verify if vehicles are parked on both sides, and ensure the length suits your vehicle. If visibility is poor at night, exit to check the exact position before reversing.
2
2
Share

What are the reasons for high fuel consumption in the eighth-generation Accord?

The reasons for high fuel consumption in the eighth-generation Accord are as follows: 1. The driver's own driving habits. 2. Excessive carbon deposits in the engine or spark plugs not being replaced for a long time. More information about the eighth-generation Accord: 1. The eighth-generation Accord is a mid-size sedan under Honda, which was well-received by many consumers when it was first launched. 2. The eighth-generation Accord comprehensively surpassed and broke through itself, claiming to be the "strongest Accord in history." 3. The eighth-generation Accord used a total of three engines: a 2.0-liter naturally aspirated engine, a 2.4-liter naturally aspirated engine, and a 3.5-liter naturally aspirated engine.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.