What is the difference between the Q5 and Q5L?

1 Answers
AllieFitz
07/29/25 9:40am
Here is an introduction to the differences between the Q5 and Q5L: 1. Different powertrains: The Audi Q5 is equipped with a 2.0T turbocharged engine, with a maximum power of 169 kW and a maximum torque of 350 Nm; the Audi Q5L is equipped with a 2.0T turbocharged engine, with a maximum power of 140 kW and a maximum torque of 320 Nm. 2. Different transmissions: The Audi Q5 uses an 8-speed automatic transmission; the Audi Q5L uses a 7-speed dual-clutch transmission. The Audi Q5 features full-time four-wheel drive, while the Audi Q5L uses an on-demand four-wheel drive system.
Was this review help?
18
0
Share
More Forum Discussions

How to Know About Traffic Violations Immediately

Methods to know about traffic violations immediately: 1. Visit the local traffic police station or headquarters and inquire about violation records at the violation processing window; 2. Make a phone inquiry by calling the 114 hotline to ask about violation records; 3. Visit the office halls of traffic police branches in various districts and counties of the city to inquire through touch query terminals; 4. Check violation records on the online motor vehicle violation inquiry website. Generally, if no violations are found after 15 days, there should be no issues, as the relevant regulations require that the collected data be collected, organized, and reviewed within 10 days. After being reviewed and confirmed by the relevant departments, the data is entered into the traffic police violation management system. As evidence of violations, within 3 days after being entered into the motor vehicle violation management system, the traffic police department will make the information available for public inquiry.
13
3
Share

How to Turn Off the Maintenance Reminder?

Maintenance reminder deactivation method: 1. First turn off the car's ignition, then press and hold the SET button on the right side of the dashboard with your left hand; 2. While holding the SET button, turn on the ignition switch; 3. Release the SET button, then press it once more; 4. Turn off the ignition switch, then turn it back on to complete the maintenance reminder reset. To ensure normal vehicle operation, manufacturers have installed certain reminder indicator lights during production. The maintenance light serves to alert the owner to perform maintenance promptly. After maintenance is completed, the 4S shop will use a diagnostic tool to reset the maintenance light. The quickest and most accurate way to clear the maintenance reminder is by using a diagnostic tool. It is recommended that owners have the reminder light cleared at the 4S shop after maintenance or visit an authorized 4S shop for reset.
19
5
Share

What is the correct installation method for a child safety seat?

Correct installation method for a child safety seat: 1. Pull out the integrated ISOFIX interface from the base at the back of the child safety seat; 2. Take out the LATCH interface from the storage bag at the back of the seat; 3. Locate the ISOFIX interface mark inside the car, align it with the guide slot and insert it. If the side indicator system turns green, the installation is secure. If it remains red, reinstallation is required; 4. Open the LATCH interface at the rear of the back seat, pass the seat's LATCH interface through the gap in the headrest, and connect it to the car's LATCH buckle, then tighten; 5. Once the indicator system turns green, thread the car's seatbelt through the seat and secure it at the red buckle position. Pull a few times to ensure it does not loosen; 6. Open the five-point harness and adjust the seat's headrest and shoulder straps to a position suitable for the baby.
17
5
Share

What are the procedures for upgrading from a C2 to a C1 driver's license?

The procedures for upgrading from a C2 to a C1 driver's license are: Bring your ID card and C2 driver's license to the service hall of the vehicle management office to apply for the C1 upgrade, correctly fill out the driver's application form, pay the relevant fees, and then obtain a driver's examination skill form to schedule the specific exam date with the staff. Upgrading from C2 to C1 requires retaking all four subjects (Subject 1 to Subject 4) for the C1 vehicle type. Therefore, it is recommended to consider applying for the C1 license initially to avoid having to retake all exams later. The C2 license allows driving small and mini automatic passenger vehicles, as well as light and mini automatic cargo vehicles. In addition to the vehicles covered by the C2 license, the C1 license also permits driving mini, small, and light special-purpose vehicles. In simple terms, the C2 license only allows driving automatic transmission vehicles, while the C1 license permits driving both automatic and manual transmission vehicles, offering a broader range of permissible vehicle types.
14
3
Share

What are the causes and solutions for engine overheating?

Engine overheating causes and solutions: 1. Insufficient coolant - If the coolant level is too low, it will severely affect the engine cooling system's heat dissipation. After the engine cools down, check the coolant level and refill to the standard value; 2. Cooling system component failure - This can cause the cooling system to malfunction. Special diagnostic equipment should be used to detect faults, then determine the faulty component based on error codes and replace or repair damaged parts; 3. Radiator clogging - As a crucial component for engine heat exchange located at the front of the vehicle, the radiator can easily accumulate debris like willow catkins on its surface, affecting heat dissipation and potentially causing engine overheating. It's recommended to clean the radiator once every summer.
12
1
Share

How to test if your ETC is working

Methods to test if your ETC is functioning properly: After successful activation of the ETC device, inserting the ETC card should display corresponding vehicle information or ETC card account balance. For some ETC devices, the relevant working indicator light will illuminate, which proves the ETC device is operating normally. If the ETC light doesn't turn on or the screen remains black, and there's no response when pressing the top button or inserting the ETC card, it's possible that the ETC device has no power or is damaged and needs to be tested or replaced at an ETC service outlet. ETC electronic toll collection lanes, also known as electronic toll platforms, refer to China's expressway network toll collection system. Vehicles can automatically pay tolls without passing through toll booths, achieving convenient expressway access.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.