What is the difference between the Panamera with S and without S?

2 Answers
DiColeman
07/29/25 12:38am
The differences between the Panamera with S and without S: 1. Top speed: The Porsche 4S has a top speed of 297 km/h, while the Porsche 4 has a top speed of 260 km/h. 2. Horsepower difference: The Panamera 4S uses a 3.0T engine with a maximum of 420 horsepower, while the Panamera 4 also uses a 3.0T engine but with a maximum of 320 horsepower. 3. Drivetrain: Compared to the Panamera 4 and 4S, the former is rear-wheel drive, while the latter is all-wheel drive. 4. Vehicle dimensions: The Porsche 4S measures 4491mm in length, 1852mm in width, and 1296mm in height, with a wheelbase of 2450mm. The Porsche 4 measures 5015mm in length, 1931mm in width, and 1418mm in height, with a wheelbase of 2920mm.
Was this review help?
16
3
Share
White
08/12/25 4:52am
I recently researched the Porsche Panamera. The S versions like the Panamera S are usually sportier upgrades with more powerful engines, greater horsepower, and faster acceleration—shaving nearly a second off the 0-100 km/h time. The driving experience offers noticeably stronger push-back sensations. The steering is more precise, the suspension is tuned stiffer for better cornering stability, and the sport exhaust delivers an exhilarating street presence. However, fuel consumption is higher, possibly burning an extra 1-2 liters in the city, with slightly pricier maintenance and faster tire wear. If you enjoy spirited driving or mountain runs, the S version is worth it, though it might be less comfortable for daily commutes. S models often come with larger wheels and upgraded braking systems for enhanced safety but cost tens of thousands more. The base non-S version is quieter, more fuel-efficient, has a softer suspension, and offers more comfortable rear seats—making it a practical, high-value choice for family trips.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

Can You Drive Long Distance with Engine Oil Leakage?

Engine oil leakage is not suitable for long-distance driving. Causes of Oil Leakage: It is generally caused by damage to engine cylinder gaskets, oil pan gaskets, sealing rings, or damage to the front and rear crankshaft oil seals, camshaft oil seals, or loosening of fastening screws. Parking inspection may reveal oil seepage, with severe cases showing noticeable reduction in engine oil, and the engine guard plate accumulating a large amount of oil. Oil leakage is a relatively frequent issue during vehicle use. Once leakage occurs, excessive loss of lubricating oil will not only waste excessive fuel but also lead to significant power loss. In severe cases, it can cause poor engine lubrication, insufficient cooling, premature damage, or potential safety hazards. Solutions: When a vehicle has an oil leak, it may not always be possible to immediately go for maintenance and inspection. In most cases, the vehicle is still in operation. Continuing to drive under such conditions poses significant safety hazards and can reduce the vehicle's lifespan and durability. Once an oil leak is detected, immediate inspection is necessary, and regular inspection and maintenance should also be prioritized.
5
0
Share

How to Adjust Excessive Tailgate Gap?

Methods for adjusting excessive tailgate gap: 1. The tailgate and hinges are typically secured by 4 screws. Open the tailgate, loosen the screws without removing them; 2. Gently push the tailgate left or right to adjust its position and softly close it to align, ensuring the gaps on both sides are roughly equal. Then, slightly reopen the tailgate and tighten the screws. After tightening, close the tailgate again to check if the gap is appropriate. If not, repeat steps 1 and 2; 3. If adjusting by loosening one screw on each side doesn't work, loosen all screws. Adjust the tailgate position, then tighten the lower screws on both sides first, followed by adjusting the position and tightening the upper two screws; 4. After installation, repeatedly test the tailgate's closing and locking mechanism to ensure the lock aligns properly with the striker. If not, loosen the striker's screws on the rear panel to adjust its position, or gently tap the striker with a hammer to align it with the lock.
20
0
Share

Can a Small Round Mirror Be Attached to a Heated Rearview Mirror?

A small round mirror can be attached to a heated rearview mirror because it does not affect the functionality of the heating feature. Below are specific instructions regarding the use of rearview mirrors: Method for Adjusting Rearview Mirrors: For the left rearview mirror, adjust it to the lowest position, then tilt it inward to the maximum extent. At this point, you should be able to see the left front door handle and the rear wheel. Then, adjust it upward until the rear door handle is just visible at the top. For the right rearview mirror, adjust it to the lowest position and then tilt it inward until you can see the right front door handle and the rear wheel. How to Use Rearview Mirrors: When your driving path is about to change, such as during parking, starting, overtaking, turning, or making a U-turn, always signal accordingly and pay close attention to the rearview mirrors. This helps you stay aware of the traffic conditions on both sides and behind you, preventing sudden surprises. When navigating narrow roads or bridges with non-motorized vehicles or pedestrians on either side, slow down and check the rearview mirrors appropriately. Maintain a safe lateral distance from non-motorized vehicles or pedestrians. Always keep a safe following distance from the vehicle ahead and use the rearview mirrors to observe and judge the distance of vehicles behind you. This ensures you are well-prepared in any situation and helps avoid rear-end collisions.
10
3
Share

How to Turn Off the Air Conditioning in a Buick Excelle?

To turn off the air conditioning in a Buick Excelle: If the air conditioning is in heating mode, simply turn off the blower by rotating the air volume control knob to the 0 position. If the cooling function is activated, after turning off the blower, you also need to press the AC button to turn off the compressor. The Buick Excelle has dimensions of 4587mm in length, 1798mm in width, and 1463mm in height, with a wheelbase of 2640mm. This model is equipped with two sets of drive systems. The Excelle 18T variant is powered by a 1.3T Ecotec dual-injection turbocharged engine, paired with a 6-speed DSS intelligent transmission, delivering a maximum power of 120kW and a maximum torque of 230Nm.
11
4
Share

Should High Beams Be Used on Highways?

High beams should be used on highways. The following are precautions for nighttime driving: Maintain Distance: When driving at night, maintain a following distance of at least 50 meters to enhance driving safety. When Overtaking: When overtaking, flash the high beams twice to alert the vehicle ahead. Confirm the overtaking conditions are safe before proceeding. Reduce Speed: Due to insufficient lighting and limited visibility at night, reduce speed when passing through intersections and residential areas, and be cautious of pedestrians. Switch to Low Beams: Pay attention to switching between high and low beams. Use high beams in areas with poor visibility, but switch to low beams when encountering oncoming traffic to ensure safe passing at reduced speed.
9
4
Share

Why Are Used Landwind X8 Cars So Cheap?

Landwind X8 used cars are priced low due to a higher incidence of issues in later vehicle stages. Below are the specific details about the Landwind X8: Vehicle Positioning: The Landwind X8 is a compact SUV under the Landwind brand, with body dimensions of 4636(mm) x 1865(mm) x 1810(mm) and a wheelbase of 2760(mm). Powertrain: The Landwind X8 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 136Ps, maximum power of 100kW, and maximum torque of 320N·m, paired with a 5-speed manual transmission.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.