What is the difference between the Panamera S and the Panamera?

1 Answers
StMargaret
07/30/25 7:39am
The differences between the Panamera S and the Panamera are as follows: 1. Exterior: The most obvious difference is the rear badge—the Panamera 4S has an 'S', while the Panamera 4 does not. Additionally, the Panamera 4S features silver brake calipers, whereas the Panamera 4 has black ones. 2. Configuration: The Panamera 4S lacks knee airbags and rear head airbags (curtains), while the Panamera 4 includes these features. 3. Performance: The Panamera 4S has a top speed of 289 km/h, compared to the Panamera 4's top speed of 259 km/h. The keyless start system is optional in the Panamera 4S but standard in the Panamera 4. The Panamera 4S is equipped with a 2.9T V6 engine producing 440 PS, while the Panamera 4 also uses a 2.9T V6 engine but with a maximum output of 330 PS.
Was this review help?
2
1
Share
More Forum Discussions

Should the left foot or right foot be used when performing a braking operation in a car?

Whether to use the left foot or right foot when performing a braking operation in a car depends on the driver's habits. For manual transmission vehicles, the left foot is used to press the clutch while the right foot operates the accelerator and brake. Since automatic transmission vehicles do not have a clutch, they only have the brake and accelerator, so the right foot is generally used for both. However, many people also prefer using both feet when driving automatic transmission vehicles. Correct braking methods: When approaching an intersection or traffic light, apply the brake in advance to gradually slow down the speed, then gently press the brake. Avoid sudden hard braking near intersections, as this not only causes forceful forward jerking, potentially hitting the steering wheel and posing a safety risk, but also negatively impacts the car's performance. During rainy or snowy weather, it is important to pay attention to the surrounding road conditions in advance and avoid hard braking. Since roads are slippery in such conditions, sudden braking can cause the vehicle to skid, leading to potential traffic accidents. Instead, reduce the speed first and then apply light braking.
20
4
Share

What is the reason why the scooter cannot accelerate when the throttle is applied?

Scooter's inability to accelerate when the throttle is applied is most likely due to a fuel supply system malfunction. A decrease in the engine's compression ratio can also lead to a reduction in power. If there is too little fuel in the engine, the air-fuel mixture becomes too lean, which results in insufficient gas thrust on the piston after ignition, prolonging the combustion time and causing the engine to generate very high temperatures during operation. If the air-fuel mixture in the engine is too rich, it can cause the scooter to feel sluggish during low-speed operation. Additionally, a clogged air filter can lead to a decrease in power. A clogged air filter can cause the carburetor float level to rise too high, blocking the carburetor's main air passage during engine operation, thus resulting in reduced power. The use of poor-quality fuel in the engine can also lead to a decrease in power, and using gasoline with an incorrect octane rating can cause engine knocking during operation. The engine's power is directly related to its compression ratio. If the engine is used for a long time, internal components will wear out. If some of the main components in the engine wear out, the engine's compression ratio will decrease, leading to a decline in the engine's efficiency.
11
2
Share

Does the Accord's Auto Hold Need to Be Pressed Every Time?

The Accord's auto hold needs to be pressed every time. Auto hold is an extension of the vehicle stability control system, which controls the four-wheel brakes through ESP. How to use the Accord's auto hold: When waiting at a traffic light or needing to stop briefly, simply press the auto hold button on the car (this button is located near the electronic parking brake) to activate it. The system will automatically deactivate when the accelerator pedal is pressed. Conditions for enabling the auto hold system: Press the autohold button to turn on the function, and the indicator light will illuminate; the vehicle must be in the started state; the driver's door must be closed; the driver must fasten the seatbelt; the vehicle speed must be zero, and the brake pedal must be pressed to activate auto hold. Principle of auto hold: Through the slope sensor, the controller provides accurate parking force. During startup, the parking control unit calculates information from the clutch distance sensor, clutch engagement speed sensor, and accelerator pedal sensor. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the car to start smoothly.
8
1
Share

What is the fuel tank capacity of the Mazda 6?

The fuel tank capacity of the Mazda 6 is 64 liters, as officially announced. Owners who have purchased the Mazda 6 can also check this information on the vehicle's configuration sheet. The Mazda 6 uses 92-octane fuel, with a fuel consumption of 7.8 to 8.1L per 100 kilometers. A full tank can provide a driving range of 859 to 948 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
11
1
Share

What is the actual measured ground clearance of the Nissan Qashqai?

The minimum ground clearance of the Nissan Qashqai is 183 millimeters. The minimum ground clearance of the Qashqai refers to the distance between the lowest point (excluding the wheels) and the supporting surface, which is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the Qashqai, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds will decrease. The Qashqai is the first product designed by Nissan's European Design Center, positioned between a compact SUV and a hatchback. Unlike crossovers produced directly on sedan platforms, the Qashqai is specifically designed by Nissan for this unique market segment. The dimensions of the Qashqai are 4401 mm in length, 1837 mm in width, and 1611 mm in height, with a wheelbase of 2646 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Qashqai is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Qashqai's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance is preferable to avoid underbody scraping or damage, considering its off-road performance.
11
5
Share

Do Trailer RVs Need License Plates?

Trailer RVs require license plates. Requirements for trailer RVs: Requirement 1: The total length should not exceed 8 meters, width should not exceed 2.5 meters, height should not exceed 4 meters, and weight should not exceed 2.5 tons. Trailer RVs can be towed by SUVs, off-road vehicles, sedans, etc. Depending on the type and size of the trailer RV, the displacement requirements for the towing vehicle vary. Generally, family sedans and SUVs with 1.6L or larger engines are capable. Requirement 2: For RVs with a length less than 6 meters and weight less than 4500kg, a C1 driver's license is required; for RVs longer than 6 meters, a B1 license is needed, and for RVs exceeding 6 meters in length, a B2 license is required. The vehicle type for trailer RVs on the driver's license is classified as a light recreational semi-trailer or medium recreational semi-trailer. License plate regulations for trailer RVs: 1. According to the 'Motor Vehicle Registration Regulations,' registering a trailer RV requires presenting a customs import certificate with Chinese labels and the motor vehicle sales invoice issued by the sales unit. The process follows the new license plate procedure, including paying the purchase tax, vehicle inspection, road test, and obtaining a yellow trailer license plate. Additionally, trailer RVs must undergo annual inspections, and their service life is limited to 15 years. 2. According to the 'Road Traffic Safety Law,' small passenger cars are only allowed to tow recreational trailers or trailers with a total mass of less than 700 kilograms, and trailers are not permitted to carry people. Trucks, semi-trailer tractors, and tractors are only allowed to tow one trailer. The lighting signals, brakes, connections, and safety protection devices of the trailer must comply with national standards.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.