What is the difference between the Mondeo Taurus and the Mondeo?

1 Answers
PaulFitz
07/29/25 12:23pm
The differences between the Ford Taurus and the Mondeo are: 1. Different body dimensions: The Ford Taurus has a body length, width, and height of 5018mm, 1884mm, and 1506mm respectively; the Mondeo has a body length, width, and height of 4873mm, 1852mm, and 1470mm respectively. 2. Different transmissions: The Ford Taurus is equipped with an 8-speed automatic manual transmission; the Mondeo is equipped with a 6-speed automatic transmission. Both the Ford Taurus and the Mondeo are four-door, five-seater sedans under Changan Ford, and both are equipped with a 2.0T turbocharged engine, with a front-wheel-drive configuration.
Was this review help?
11
5
Share
More Forum Discussions

Do pickup trucks require an annual inspection?

Pickup trucks do not require an annual inspection. Below is extended information about pickup truck annual inspections: Pickup truck inspection schedule: Pickups are exempt from inspection for the first 6 years, requiring only a stamp at the vehicle management office every two years during this period. From years 7-15, they must be inspected annually, and after 15 years, they require inspection every six months. The inspection process for pickups is the same as for regular passenger vehicles. The 2019 pickup scrappage regulation abolished the mandatory 15-year scrappage rule for pickups, but vehicles that fail inspections or reach 600,000 kilometers must be scrapped. Pickup truck emission testing during annual inspection: Primarily verifies if the engine number matches the vehicle registration, performs a simple vehicle condition check, and then fills out the emission test form. During testing, an inspector drives the vehicle on the testing line - new vehicles usually pass easily. After obtaining a qualified emission test form, you can pay at the window to receive the emission compliance certificate. Pickup truck exterior inspection during annual review: The exterior inspection mainly checks for damaged lights, whether the vehicle body matches its original condition, any suspension modifications, and tire conditions.
11
4
Share

Is It Beneficial to Occasionally Use 95 Octane Gasoline for Your Car?

Occasionally using 95 octane gasoline is not beneficial for your car. Here are the differences between 95 octane and 92 octane gasoline: Different compositions: The fuel quality is the same. The main components of 92 octane gasoline consist of 92% isooctane and 8% n-heptane, while 95 octane gasoline is composed of 95% isooctane and 5% n-heptane. Isooctane also has another function, which is anti-knock. This means the higher the proportion of isooctane, the better the anti-knock performance. Different prices: 95 octane gasoline is more expensive than 92 octane. Different power outputs: 95 octane gasoline is suitable for engines with higher compression ratios. As the operating speed of such engines increases, the ignition timing in the cylinder advances. When the speed reaches a critical point, the fuel-air mixture in the cylinder may combust prematurely before ignition, a phenomenon known as knocking. Increasing the octane rating of the gasoline can effectively enhance anti-knock performance.
3
5
Share

Is the Tianjin Honda 90 still available as a new car?

Tianjin Honda 90 has been discontinued. Extended information on the maintenance and repair of Tianjin Honda 90 motorcycles: Battery maintenance: Remove the left side cover, for a new motorcycle's battery, add electrolyte between the upper and lower scale marks. It is recommended to charge the new battery for better performance. Use a 0.1A current to charge for 6-7 hours, or a 0.3A current for 3-4 hours. Regularly check the battery, and if the liquid level is below the minimum mark, add distilled water to the specified value. If the battery is low on charge or not used for a long time, it should be recharged. Note that charging produces hydrogen and oxygen, so open flames are strictly prohibited at the charging site. Rear brake adjustment: Support the motorcycle with the main stand. Measure the travel distance from the original position to when the brake starts working when the rear brake pedal is depressed, which should be 20-30mm. If adjustment is needed, the method is the same as for the front brake.
14
0
Share

How much fuel does a 460 horsepower engine consume at idle for one hour?

This fuel consumption has not been calculated, and it is not recommended for drivers to idle in place. There are no legal regulations regarding this in China, but in many foreign countries, idling for more than 3 minutes to warm up the engine can result in fines, and it also causes significant environmental pollution. Idling in place likely consumes a very small amount of fuel, but it is highly detrimental to both the environment and the vehicle, leading to excessive carbon buildup, which can affect the vehicle's normal operation in the future. Additional information: Modern vehicles display instantaneous fuel consumption on the dashboard to inform the driver of the current fuel usage during movement, but most vehicles do not show instantaneous fuel consumption when idling.
11
5
Share

What is the sequence of clutch and handbrake when starting the car?

It's essential to remember the general knowledge for starting the car: first press the clutch, second shift the gear, third turn on the indicator, fourth honk the horn, fifth release the handbrake. Here is some extended knowledge about car starting: Before starting, check if the doors are closed. Ensure the seat belt is fastened before starting, and observe the rearview mirrors to confirm safety on both the left and right sides of the vehicle. Turn on the left indicator in advance before starting, and release the parking brake lever simultaneously when starting. When starting, control the accelerator pedal appropriately, avoiding rapid acceleration to prevent the vehicle from jerking. Use a low gear when starting.
4
2
Share

Pros and Cons of Stage 1 ECU Tuning?

The advantage of ECU tuning is that it can enhance the car's performance and unlock the engine's potential, while the disadvantage is that it may disrupt the vehicle's overall balance. A detailed analysis of the pros and cons is as follows: Advantages of ECU tuning: The most significant benefit is the improvement in the car's power output. Both horsepower and torque can be increased. Generally, naturally aspirated models may see a 5%~10% improvement, while turbocharged models can achieve up to a 30% increase. ECU tuning helps to unleash the engine's potential. Disadvantages of ECU tuning: The biggest drawback is the disruption of the vehicle's overall balance. Remember this: the factory settings are the most balanced parameters set by the manufacturer after considering all aspects. A sudden significant increase in power output will inevitably reduce the engine's lifespan. Note: Not all car models are suitable for ECU tuning. ECU tuning is meant to unlock the engine's potential. However, some engines have no remaining potential, making tuning unnecessary.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.