What is the difference between the CC Huayan and Meiyan versions?

What brand of tires does the Bin Yue use?

Except for the top version, all Bin Yue models use Linglong tires, while the top version is equipped with Continental tires. There are two specifications: one is 215/60R17, used in the 1.0T models and the lowest-equipped Hunter version of the 1.5T, with the original tire brand being Linglong and the tread pattern: GREEN-MAX-4X4-HP. The second specification is 215/55R18, Continental, used in the top version. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground, usually mounted on metal rims. They support the vehicle body, cushion external impacts, ensure contact with the road surface, and guarantee the vehicle's driving performance. The replacement cycle for tires is generally 2-3 years or after driving 60,000-100,000 kilometers. Different brands may have slightly different lifespan regulations due to varying requirements for tires. However, relying solely on a numerical value to determine replacement time is insufficient; the actual condition of the tires must be considered. There are many factors affecting tires, and if any of the following situations occur, it indicates a safety hazard, and the tires should be replaced promptly. Almost every tire has a wear indicator. Generally, the wear indicator height for passenger car tires is 1.6 millimeters (this height is also the legal minimum groove depth), while for load-bearing tires, it is 2.4 millimeters. If the wear indicator is flush with the tread, it means the tire is significantly worn and should be replaced promptly. A bulging tire indicates that the internal cords have broken and cannot be restored through repair, necessitating immediate replacement to avoid safety hazards. If the puncture hole from a nail is too large or the tire has been repaired too many times, it can directly affect driving safety. Prolonged driving under such conditions may lead to a tire blowout, so the tire should be replaced promptly.

18

1

Share

How to replace the rubber strip of a frameless wiper?

To replace the rubber strip of a frameless wiper, follow these steps: 1. First, remove the wiper from the windshield. 2. Check both ends of the wiper to identify which end of the rubber strip cannot slide back and forth; this is the part that needs to be removed. 3. After removing the clip, you will see that the rubber strip to be replaced is secured to the wiper with a metal buckle. 4. Use a tool like a clip to pry up this metal buckle and remove the rubber strip. 5. Install the new rubber strip. Frameless wipers do not have a supporting frame; instead, they consist of four components: the wiper rubber strip, frameless wiper steel strip, wiper cover, and plastic parts. This design makes the wiper more flexible compared to traditional wipers, ensuring even force distribution and wear, which results in better wiping performance.

2

4

Share

Is the Roewe eRX5 Hybrid Suitable for Long-Distance Travel?

It is suitable for long-distance travel. Below is relevant information about the Roewe eRX5: 1. Battery Capacity: SAIC has equipped the eRX5's battery pack with a water-cooled circulation system. The battery's BMS monitors each individual cell to maintain consistency in their charge levels. Additionally, to extend battery life, the BMS implements low-battery protection, reserving 20% of the battery capacity. If the charge drops below this level, the engine will start to recharge the battery. 2. Range: SAIC is highly confident in this powertrain and provides the following data: combined fuel consumption of 1.6L/100km under standard conditions; combined fuel consumption of 5.4L/100km in hybrid mode (with the battery maintained at a low charge state); a pure electric range of 60km, with a maximum combined range of up to 650km. The battery can be fully charged from its lowest level in just 3 hours.

19

1

Share

Is the Terra from Dongfeng Nissan or Zhengzhou Nissan?

The Terra does not belong to Dongfeng Nissan; this vehicle is a midsize SUV launched by Zhengzhou Nissan. The relationship between Dongfeng Nissan and Zhengzhou Nissan is similar to that between FAW-Volkswagen and SAIC-Volkswagen. However, after the restructuring of Zhengzhou Nissan, both Dongfeng Nissan and Zhengzhou Nissan are joint ventures established by Dongfeng Motor Corporation and Nissan. In terms of configuration, the Terra is well-equipped with primary and passive safety features, including hill start assist, LED daytime running lights, side curtain airbags, rear parking sensors, anti-lock braking system (ABS), collision warning/automatic emergency braking, brake assist (BA/EBA/BAS, etc.), electronic brakeforce distribution (EBD/CBC, etc.), knee airbags, electronic stability program (ESP/DSC/VSC, etc.), child seat anchors, tire pressure monitoring, and traction control (ASR/TCS/TRC, etc.). In terms of power, the Nissan Terra is equipped with a 2.5L naturally aspirated engine with the model code QR25, delivering a maximum power of 142kW, maximum horsepower of 93PS, and maximum torque of 245Nm. It is paired with a 6-speed manual or 7-speed automatic transmission.

8

0

Share

How to Reset the Mercedes-Benz SOS?

To reset the Mercedes-Benz SOS, you can press the corresponding light button back to deactivate it, or press the hang-up button on the steering wheel to cancel it. The SOS inside a Mercedes-Benz is an emergency call system. In the event of a major accident, various sensors detect the vehicle's state, and the SOS emergency call system sends distress signals along with GPS positioning data to the receiving platform, facilitating prompt rescue. Taking the Mercedes-Benz GLC as an example: this model has a length, width, and height of 4764mm, 1898mm, and 1642mm respectively, with a wheelbase of 2973mm. It is a 5-door, 5-seater SUV with a 9-speed automatic transmission.

4

5

Share

Do I need to bring my ID card for the Subject 2 test simulation?

Subject 2 simulation test requires ID card swiping. Introduction to Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the field driving skills test. The test items for cars C1 and C2 include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves). Some regions also have a sixth item: high-speed card collection. Notes for Subject 2: During the test, quickly adjust the seat and rearview mirror and fasten the seatbelt after getting into the car. After everything is ready, verify your fingerprint and enter the corresponding test lane according to the voice prompts. If the vehicle stalls, make sure to shift to neutral before restarting. When reversing into a garage, note that both front wheels must cross the dashed line before starting to reverse. Before entering the right-angle turn area, turn on the turn signal, and you may turn it off before starting the turn after entering the area. Pay attention to using the handbrake during the slope start.

13

2

Share

What is the difference between the CC Huayan and Meiyan versions?

What brand of tires does the Bin Yue use?

How to replace the rubber strip of a frameless wiper?

Is the Roewe eRX5 Hybrid Suitable for Long-Distance Travel?

Is the Terra from Dongfeng Nissan or Zhengzhou Nissan?

How to Reset the Mercedes-Benz SOS?

Do I need to bring my ID card for the Subject 2 test simulation?

What kind of engine oil should be used for Volkswagen Lavida 1.6 naturally aspirated?

What Toyota model has a golden emblem?

Where to Get a Motorcycle Annual Inspection?

How to Drive a New Manual Transmission Car for Fuel Efficiency?