What is the difference between the blue label and yellow label of compulsory traffic insurance?

1 Answers
DelRuth
07/30/25 4:51am
The main difference between the yellow inspection label and the blue inspection label lies in the year of the inspection deadline. Below are the specific details about the inspection labels: Cycle: To enhance the recognizability of inspection labels, the vehicle management office uses different colors to distinguish between years. The colors of the inspection labels follow a sequence of yellow, green, and blue, with a three-year cycle. Placement: The vehicle inspection label must be affixed to the upper right corner of the front windshield. During routine checks by traffic police, they typically judge whether a vehicle has passed inspection based on the color of the label, unless there is a special reason to do otherwise. If the color of the inspection label were the same every year, vehicles would need to be stopped for verification during checks.
Was this review help?
12
3
Share
More Forum Discussions

Under What Circumstances Does a Car Need a Wheel Alignment?

Regarding the situations where a car needs a wheel alignment, the following points are relevant: 1. The vehicle's driving performance is affected (the most direct feeling for the driver is the car pulling to one side or the steering wheel not returning to center automatically). 2. Damage to the chassis and suspension caused by an accident. 3. Abnormal tire wear (but it's also necessary to consider whether the abnormal wear is due to incorrect tire pressure. Overinflation can intensify wear on the center of the tread, while underinflation can intensify wear on both sides of the tread. If one side shows uneven wear, it might be due to a camber angle deviation). 4. The axle or suspension components have been disassembled.
18
2
Share

What colors are available for the Buick Enclave?

The Buick Enclave is available in the following colors: Eclipse Blue, Merlot Red, Meteorite Gray, Shadow Gray, Snow White, and Black Onyx. Below are some relevant details about the Enclave: 1. Taking the 2020 Enclave as an example, it is classified as a mid-to-large-size SUV with body dimensions of 4981mm in length, 1953mm in width, and 1727mm in height, a wheelbase of 2863mm, a fuel tank capacity of 73 liters, and a curb weight of 1880kg. 2. The 2020 Enclave features a MacPherson strut front suspension and a five-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 237 PS, a maximum power output of 174 kW, and a peak torque of 350 Nm, paired with a 9-speed automatic transmission.
3
2
Share

What are the functions of R gear, P gear, N gear, and D gear?

Here are the functions of R gear, P gear, N gear, and D gear: 1. P gear: It stands for Parking gear. When this gear is engaged, the parking lock mechanism locks the transmission output shaft. 2. R gear: It stands for Reverse gear. Engaging this gear connects the hydraulic system's reverse oil circuit, causing the drive wheels to rotate in reverse for backward movement. Do not forcibly shift to "R" gear when the vehicle is not completely stopped, as this may damage the transmission. 3. N gear: It stands for Neutral gear. When in neutral, the planetary gear system idles and cannot output power. 4. D gear: It stands for Drive gear. When the gear selector is in this position, the hydraulic control system automatically connects the corresponding forward gear oil circuit based on throttle opening and vehicle speed signals. It can automatically shift up or down according to driving speed changes, achieving automatic transmission functionality.
5
4
Share

How to adjust the time on Renault Koleos?

To adjust the time on Renault Koleos: Turn on the audio system, locate the bottom right button, press the central function key to display system-settings, enter and find clock, then proceed to adjust the time. Below is relevant information about Renault Koleos: 1. The Koleos measures 4672mm in length, 1843mm in width, and 1685mm in height, with a wheelbase of 2705mm. Most control buttons are integrated into the touchscreen, with base models featuring a 7-inch screen and higher-end models equipped with an 8.7-inch screen. 2. The Koleos is available with two engine options: a 2.0L producing maximum power of 113kw (154ps) and a 2.5L delivering maximum power of 137kw (186ps).
11
0
Share

How to Replace the Air Filter on a Cruze?

The method for replacing the air filter on a Cruze: 1. Open the engine hood and locate the air filter. 2. Gently release the two clips securing the filter box cover, then lift the entire cover. 3. Remove the old air filter. 4. Install the new air filter, replace the cover, and secure the clips. Here are some related details: 1. The Cruze's air filter should be replaced every 10,000 kilometers or approximately every six months. In areas with heavy smog or willow catkins, it's recommended to replace the air filter every three months. 2. The Cruze is a model under Chevrolet, with body dimensions of 4450mm in length, 1807mm in width, and 1459mm in height, and a wheelbase of 2700mm.
5
0
Share

How to Check Tire Pressure Monitoring in Cars?

If the vehicle is equipped with a built-in tire pressure monitoring function, the tire pressure can be viewed on the car dashboard. If the vehicle does not have a built-in tire pressure monitoring function, there will be a tire pressure warning. The tire pressure standards can be found in the user manual, on the vehicle's B-pillar next to the driver's door, or on the fuel tank cap. Different brands and models of vehicles may have different recommended tire pressures. Tire Pressure Monitoring: Tire pressure monitoring involves real-time automatic monitoring of tire pressure while the car is in motion, with alerts for tire leaks or low pressure to ensure driving safety. Direct Tire Pressure Monitoring: Direct tire pressure monitoring systems use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the weight of the vehicle causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors the tire pressure. Indirect tire pressure monitoring systems rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both direct and indirect systems. It is equipped with direct sensors in two diagonally opposite tires and a 4-wheel indirect system. Compared to a full direct system, this hybrid system reduces costs and overcomes the limitation of indirect systems in detecting simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires like a direct system.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.