What is the difference between the Audi A7 Premium Selection and Exclusive models?

1 Answers
AllisonRose
07/24/25 9:06am
The differences between the Audi A7 Premium Selection and Exclusive models are as follows: Engine power: The Premium Selection model is equipped with a 2.0T low-power turbocharged engine, while the Exclusive model is equipped with a 2.0T high-power turbocharged engine. Performance: The new car is equipped with high/low-power 2.0T (with 12V mild hybrid) and 3.0T V6 (with 48V mild hybrid) engines, with the former offering two power tuning versions. The Premium Selection model has a maximum power of 140kW (190PS) and a peak torque of 320N·m, while the Exclusive model has a maximum power of 165kW (224PS) and a peak torque of 370N·m.
Was this review help?
14
1
Share
More Forum Discussions

When to Enter the Left-Turn Waiting Zone When Turning Left?

Left-turn waiting zones can be entered under the following two conditions: 1. When the straight-ahead signal light in the same direction turns green: Left-turning vehicles can enter the left-turn waiting zone to await the turning signal (even if the left-turn light is red at this time); 2. When the left-turn signal light turns green: Vehicles waiting in the waiting zone should promptly pass through the intersection. Additional information is as follows: 1. What is a left-turn waiting zone: It refers to an area designated for "waiting to make a left turn." Roads with left-turn waiting zones are typically one-way roads with three or more lanes, and these zones are set up to improve traffic efficiency. 2. When not to enter: When both the straight-ahead and left-turn signal lights ahead are red, vehicles must not enter the "left-turn waiting zone" and should wait behind the stop line. Otherwise, it constitutes running a red light, which incurs a penalty of 6 points.
4
1
Share

What is the reason for one side of the car taillight being on and the other side not?

Bulb damage, which requires timely replacement, or wiring issues that need to be checked by professionals. Below is relevant information about car taillights: 1. Installation position of car taillights: Taillights alert the vehicle behind of the presence of a car ahead during nighttime driving and indicate the positional relationship between the two vehicles, hence they are installed on both sides at the rear of the car. 2. Design principles of car taillights: They must have sufficient luminous intensity so that the taillights can be clearly distinguished by drivers of other vehicles or pedestrians even in bright daylight. During nighttime driving, the light emitted by the taillights should not cause glare or discomfort to drivers of other vehicles or pedestrians.
13
3
Share

What color is the license plate for hybrid vehicles?

Hybrid vehicle license plate colors vary depending on the vehicle type: 1. Range-extended hybrid models use blue plates; 2. Plug-in hybrid models use green plates. Hybrid refers to oil-electric hybrid power, which is a combination of fuel and electric energy, where an electric motor serves as auxiliary power to drive the vehicle. During vehicle start-stop, the hybrid system relies on the electric motor, and the engine does not operate until a certain speed is reached. Its functions include: maintaining the engine in good working condition, providing excellent power performance, and low emissions. The power system of hybrid electric vehicles is divided into: 1. Control system; 2. Drive system; 3. Auxiliary power system and battery.
18
5
Share

What Causes High Engine Temperature at Idle Speed?

The reasons for high engine temperature at idle speed are: 1. Insufficient antifreeze in the engine cooling system; 2. Malfunction of the thermostat in the engine cooling system causing overheating; 3. Abnormal operation of the cooling fan in the engine cooling system, resulting in poor heat dissipation of the coolant; 4. Failure of the water pump in the engine cooling system, causing poor coolant circulation due to impaired pump rotation. Overheating, commonly known as "boiling over," can lead to deformation or even damage to the cylinder head and cylinder block. Precautions for high engine temperature include: 1. When driving, slow down and pull over, but do not rush to turn off the engine; 2. Never pour cold water on the engine to cool it down.
5
4
Share

How to Remove the Spare Tire of a Great Wall Pickup Truck?

The steps to remove the spare tire of a Great Wall pickup truck are: 1. Remove the dust cover; 2. Connect the socket wrench to the screw socket; 3. Rotate the socket wrench counterclockwise, and the spare tire will slowly descend under the traction of the steel cable; 4. Pull down the steel cable or chain and remove the clip below. Taking the Great Wall Pao 2020 model as an example, its body dimensions are: length 5437mm, width 1958mm, height 1893mm, wheelbase 3230mm, and fuel tank capacity 80L. The Great Wall Pao 2020 model is equipped with a 2.0L turbocharged engine, with a maximum power of 140kW, maximum torque of 360Nm, maximum power speed of 4000 to 5500 rpm, and is matched with an 8-speed automatic transmission.
2
5
Share

What is the size of the 230tid engine?

230tid engine is 1.2T, with a maximum horsepower of 143PS and a maximum power of 105kW. An engine is a machine that can convert other forms of energy into mechanical energy, and it is divided into: 1. Internal combustion engine: fuel burns inside the engine; 2. External combustion engine: fuel burns outside the engine; 3. Gas turbine: combustion produces high-pressure gas, which uses the high pressure to rotate the turbine blades; 4. Jet engine: an engine that directly generates thrust by the high-speed airflow ejected from the nozzle. The precautions for engine maintenance are: 1. Using high-quality engine oil can lubricate, clean, cool, seal, and reduce wear; 2. Using qualified coolant; 3. Regularly cleaning the radiator scale; 4. Regularly removing carbon deposits from the car; 5. Replacing the car's three filters on time.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.