What is the difference between the 4G version and the WiFi version of car navigation?

1 Answers
TessaMarie
07/29/25 2:07pm
The differences between the WiFi version and the 4G version of car navigation are as follows: 1. Different supported ranges: If it is a WiFi version navigation, it does not support the installation of a SIM card. If it is a 4G version navigation, a SIM card can be installed. 2. Different usage methods: The WiFi version navigation must use a mobile phone to create a hotspot, and then the central control screen must turn on WiFi to connect to the mobile phone hotspot to access the internet. The 4G version navigation can directly install a SIM card to access the internet without the need to use a mobile phone to create a hotspot. The 4G version navigation can also create a hotspot, and after turning on the mobile phone WiFi, the mobile phone can connect to it.
Was this review help?
18
4
Share
More Forum Discussions

What is the function of the shark fin on a car?

The functions of the shark fin on a car are as follows: 1. Safety: It overcomes the shortcomings of traditional telescopic rod antennas, whip antennas, and car glass antennas, integrating all the functions of a conventional antenna with the latest modern electronic technology. The built-in safety and anti-theft structure effectively prevents antenna theft, offering a higher safety factor. 2. Powerful functionality: The shark fin car antenna integrates various powerful automotive electronic functions such as FM, GPS, and GSM, effectively combining "fashion" with "functionality" to achieve perfection. 3. Noise reduction: Combining aerodynamic principles and aesthetic principles, it effectively reduces airflow noise, making driving quieter. 4. Convenience: It eliminates the need to remove the antenna during automatic car washes or when entering spaces with limited clearance, saving time and hassle. 5. Static reduction: The shark fin antenna fully utilizes the characteristics of electronic discharge at the tip, directing static electricity to the tail tip of the shark fin antenna for release. No matter where the shark fin antenna is installed on the car, it can effectively reduce static electricity on the car's surface.
11
4
Share

Is Wheel Rotation Used for Dynamic Balancing?

Wheel rotation, if it involves swapping the front and rear tires of a vehicle, does not require dynamic balancing. This is because the process only involves the removal and installation of the wheel assembly, not the disassembly and reassembly of the tires. Dynamic balancing is only necessary when the tire and rim are reassembled, such as when replacing the rim, changing the tire, repairing a puncture, installing a tire pressure monitoring module, or switching to valve stems made of different materials. Dynamic balancing not only eliminates the force couple caused by dynamic imbalance but also removes the centrifugal force from static imbalance. Therefore, it can be used to balance various cylindrical rotors, such as those in centrifugal compressors or large electric motors.
2
0
Share

How to Display the Reversing Camera Guidelines on BMW X3?

Shift the gear to reverse, push the iDrive knob to the left, and a settings page will appear on the central control screen. Swipe through the page to find the reversing camera guidelines option, and check this option to display the guidelines when reversing. More relevant information is as follows: 1. The reversing camera functions like our eyes, using a wide-angle infrared camera installed at the rear of the vehicle. Through the display screen inside the car, obstacles behind the vehicle can be clearly seen. When the reverse gear is engaged, the system automatically activates the high-definition reversing camera located at the rear, displaying the situation behind the vehicle clearly on the reversing LCD screen, allowing the driver to accurately assess the rear road conditions. 2. When the vehicle is shifted into reverse, the reversing camera system automatically activates the camera at the rear, displaying the rear view on the central control or rearview mirror's LCD screen. At this point, a border area will appear on the screen, and the lines forming this area are the reversing camera guidelines, which can be considered as a simulation of the reversing result. These lines simulate the wheel trajectory under current reversing conditions, reminding the driver to adjust the direction in time.
2
5
Share

Can I Add Water When Coolant Is Insufficient?

In emergency situations when coolant is insufficient, you can add water, preferably purified water, but this is only to prevent the engine temperature from rising too high due to insufficient coolant. After adding water, the freezing point will decrease, so it is important to promptly check the coolant's freezing point, which varies depending on the ambient temperature. Coolant is an essential part of a car's engine, circulating through the engine cooling system to remove excess heat generated during engine operation, ensuring the engine runs at the proper operating temperature. When coolant is insufficient, the engine's water temperature may rise too high, potentially causing damage to engine components. Therefore, if a car owner notices insufficient coolant, it should be replenished promptly.
4
0
Share

How many cylinders does the Santana engine have?

The Santana engine is a 4-cylinder engine. The Santana is equipped with EA211 engines with displacements of 1.4L and 1.6L. The engine comes in two displacements, with the 1.4L engine delivering a maximum power of 66 kW and the 1.6L engine delivering a maximum power of 81 kW. The Santana is a brand car produced by Volkswagen in California, USA. In terms of appearance, the new Santana does not have many highlights, featuring a relatively simple overall design without exaggerated lines. The waistline running from the front to the rear gives the body a strong sense of tension, and the multi-spoke wheels match the body well, while the rear wheels still use large-sized drum brakes.
4
2
Share

How to Set the Automatic Locking for Mercedes-Benz?

Mercedes-Benz The method to set the automatic locking for Mercedes-Benz is as follows: 1. Use the left and right keys on the steering wheel to select the settings function; 2. Choose vehicle settings; 3. Select automatic lock in the vehicle settings and press the OK button. Mercedes-Benz is a German automobile brand with a complete range of models, currently mainly producing C-Class, E-Class, S-Class, and G-Class vehicles. The Mercedes-Benz C-Class comes in sedan, station wagon, and two-door coupe versions, with a wide range of engine configurations available for each model. The new Mercedes-Benz C-Class sedan is equipped with active safety systems, intelligent lighting systems, preventive safety systems, passenger safety protection systems, and rescue tools, making it first-class in comfort, refinement, practicality, and safety.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.