What is the difference between synchronous twin-cylinder and asynchronous twin-cylinder motorcycle engines?

1 Answers
LeAlaina
07/30/25 2:41am
Motorcycle engine synchronous twin-cylinder and asynchronous twin-cylinder differences are as follows: Differences in RPM, vibration, and torque: The main differences between asynchronous twin-cylinder and synchronous twin-cylinder engines are that asynchronous twin-cylinder engines have relatively less vibration and less torque, while synchronous twin-cylinder engines have relatively more vibration and more torque. Differences during operation of the two cylinders: In addition to the differences in RPM vibration and torque size, there are other differences between asynchronous twin-cylinder and synchronous twin-cylinder engines. When an asynchronous twin-cylinder engine operates, the two cylinders are staggered—when one is up, the other is down, with a 270-degree difference between them. On the other hand, a synchronous twin-cylinder engine operates with both cylinders moving up and down simultaneously, but the power strokes are staggered—when one cylinder is in the power stroke, the other is in the intake stroke, and when one cylinder is compressing, the other is exhausting.
Was this review help?
17
4
Share
More Forum Discussions

Does Gasoline Dissolve in Water?

Gasoline can dissolve in water, but it is relatively difficult to dissolve and is almost insoluble in water. Gasoline is more soluble in alcohol. More details are as follows: 1. Gasoline is a colorless to light-yellow, easily flowing liquid at room temperature, which is hardly soluble in water and is highly flammable. Its distillation range is between 30°C to 220°C. When the concentration in air reaches 74–123 grams per cubic meter, it can explode upon contact with fire. The calorific value of gasoline is approximately 44,000 kJ/kg (the calorific value of a fuel refers to the heat produced by the complete combustion of 1 kg of the fuel). 2. Gasoline is produced through the fractional distillation of crude oil and the cracking of heavy distillates. During crude oil processing, units such as distillation, catalytic cracking, thermal cracking, hydrocracking, catalytic reforming, and alkylation all produce gasoline components, but with different octane ratings. For example, straight-run gasoline has a low octane rating and cannot be used alone as an engine fuel. 3. When some surfactants (such as laundry detergent) are added to water and shaken thoroughly, gasoline becomes more soluble in water.
15
2
Share

What Are the Reasons Why a Car Battery Can't Hold a Charge?

There are many reasons why a car battery can't hold a charge: 1. The car has been parked for a long time, causing the battery to lose power. 2. The battery has reached the end of its service life. 3. Insufficient battery electrolyte or leakage. 4. A blown fuse causing the battery to lose power. 5. Corrosion of the battery terminals. 6. Engine damage. Here are some solutions: 1. Use a positive and negative pulse method to depolarize the battery and then fully discharge it. 2. Add water for repair. Only use deionized water or purified water; never use tap water, as it can cause significant self-discharge issues. 3. Additionally, during daily use, avoid situations where there is a large current inflow or outflow, as this can accelerate battery aging.
4
3
Share

How to Fix a Broken Car Cigarette Lighter Socket?

Reasons and solutions for a broken car cigarette lighter socket are as follows: 1. Check for poor contact issues. If unused for a long time, poor contact may occur. Try turning the cigarette lighter plug a few times or unplugging and reinserting it. 2. If the cigarette lighter fuse is blown, replace it with a new one. If the damage is caused by misaligned pins in the socket, gently adjust them back into place using a small screwdriver. 3. If the cigarette lighter socket itself is damaged, replace the socket. Additional information about car cigarette lighters: 1. Frequently connecting high-power devices to the cigarette lighter plug can easily blow the fuse, requiring replacement. 2. Refer to the car manual to locate the fuse box, which usually has labeled fuse positions and includes spare fuses. When adjusting the pins inside the socket with a small screwdriver, be careful to avoid grounding, as this can blow the cigarette lighter fuse.
4
2
Share

How to Lift the Rear Seat of the Verano?

Method to lift the rear seat of the Verano: 1. Push the seatback all the way back until it locks; 2. Check for any obstructions between the seat cushion and the seatback; 3. Lift from the end of the seat upwards to raise it. The dimensions of the Buick Verano hatchback are 4370mm in length, 1809mm in width, and 1461mm in height, while the sedan version measures 4718mm in length, 1802mm in width, and 1471mm in height. In terms of power, the Verano is equipped with a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine. The 1.5-liter naturally aspirated engine delivers a maximum horsepower of 118 hp, a maximum power of 87 kW, and a maximum torque of 146 Nm. The 1.5-liter turbocharged engine produces a maximum horsepower of 169 hp, a maximum power of 124 kW, and a maximum torque of 250 Nm.
7
4
Share

What is the comparison between Porsche 718 and 911?

Comparison between Porsche 718 and 911: In terms of body dimensions: The Porsche 718 measures 4379mm in length, 1801mm in width, and 1295mm in height; the 911 measures 4499mm in length, 1808mm in width, and 1294mm in height. 2. Transmission: The Porsche 718 is equipped with a 7-speed dual-clutch transmission across the range; the 911 offers a choice between 7-speed and 8-speed dual-clutch transmissions. In terms of power: The Porsche 718 is powered by a 2.0-liter turbocharged and a 2.5-liter turbocharged engine; the 911 is powered by a 3.0-liter twin-turbocharged, a 4.0-liter naturally aspirated, and a 3.8-liter twin-turbocharged engine. 4. Drivetrain: The Porsche 718 is rear-wheel drive across the range; the 911 offers both rear-wheel drive and all-wheel drive options.
15
3
Share

What to Do When There Are Abnormal Noises While Driving?

When there are abnormal noises while driving, they can be addressed based on different situations: 1. Abnormal noises from the tires during driving. There are many aspects to tire noises, and a preliminary judgment can be made based on the sound: If it is a low "thud" sound, it is mostly due to tire deformation, bulging, severe wear, or insufficient pressure; if it is a "click" sound, it is likely that there are some stones stuck in the tire tread; if there is a rhythmic "clunk" or "hum" sound with a loud volume, the tire needs to be replaced or the tire pressure adjusted. 2. Abnormal noises from the suspension. There are many reasons for suspension noises, but they are also difficult to diagnose. Therefore, car owners should have some ability to identify them. If there is a "creaking" sound, it is mostly the sound of the shock absorber spring; if there is a "thud" or "crack" sound near the wheels when going over bumps, it is likely a fault with the shock absorber or suspension components, and it is necessary to go to the shop for inspection and repair in time.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.