What is the difference between Super Select 4WD and part-time 4WD?

1 Answers
OCali
07/30/25 9:58am
Here are the specific differences between Super Select 4WD and part-time 4WD: Switching between 2WD and 4WD: Part-time 4WD requires stopping the vehicle to switch modes, and after switching, the vehicle can hardly turn, so it usually operates in 2WD mode. Super Select 4WD, on the other hand, allows switching between 2WD and 4WD modes while driving at high speeds without stopping. Structure: Part-time 4WD uses a purely mechanical structure, which is more reliable than Super Select 4WD. Turning: Super Select 4WD, equipped with an inter-axle differential, allows high-speed turns on any road in 4WD mode, whereas full-time 4WD cannot.
Was this review help?
14
1
Share
More Forum Discussions

Can Car Keys and House Keys Be Stored Together?

They can be stored together. Car keys are remote-controlled and only malfunction when subjected to frequency band interference. Common household keys are primarily made of materials like copper, zinc, aluminum, iron, and other metals, which do not contain elements that cause frequency interference. Areas to be cautious about with car remote keys include: 1. Restaurant clusters: Many restaurants use mobile ordering devices for convenience, which operate on frequency bands that may overlap with those of car remote keys. The remote key will return to normal only after leaving these areas. 2. Anti-theft alarms: If an anti-theft alarm malfunctions, it may continuously emit waves across various frequency bands, causing widespread interference that can also affect car remote keys. 3. Electric sliding gates: These are commonly used in offices and residential areas. When operating such gates with a remote, specific frequency band waves are continuously emitted, potentially interfering with a car's remote signals. 4. Electronic screen clusters: Large outdoor electronic screens, if malfunctioning, can become sources of interference, disrupting remote signals for nearby vehicles.
9
2
Share

How Should Beginners Drive in the City?

First and foremost, it is essential to familiarize yourself with urban road conditions, remain vigilant of surrounding non-motorized vehicles, recognize traffic signs, yield to pedestrians, and maintain high concentration. Consciously adhere to traffic rules to ensure safe and civilized travel. Key considerations for beginners driving on city roads: 1. Overtake Decisively: It's unrealistic for beginners to stick strictly to one lane without changing lanes or overtaking. Once the decision to overtake is made, do so decisively and try to get as close as possible to the vehicle ahead to minimize overtaking time. Hesitation should be avoided. 2. Observe Traffic Flow When Changing Lanes: Always check the traffic flow in adjacent lanes via the rearview mirror before changing lanes, and judge the safe distance based on the speed of the vehicles behind. Additionally, according to traffic regulations, turn signals must be activated in advance before changing lanes. Failure to do so will make the lane-changing vehicle fully liable in the event of a collision. 3. Have a Companion: It's advisable for beginners to have someone accompany them while driving. Having an experienced driver by your side acts as a 'reassuring presence,' providing a 'backbone' for your driving. This helps prevent nervousness and fumbling, allowing your driving skills to be displayed normally. Any mistakes made during driving can also be promptly pointed out and corrected with their assistance.
15
0
Share

Where Can China 5 Vehicles Still Be Registered Now?

In 2021, cities where China 5 vehicles can still be registered include all areas of Liaoning, Jilin, Heilongjiang, Fujian, Jiangxi, Hubei, Hunan, Guangxi, Guizhou, Yunnan, Tibet, Gansu, Qinghai, Ningxia, Xinjiang provinces, as well as regions in Shanxi, Inner Mongolia, Sichuan, and Shaanxi provinces that have not yet implemented the China 6 emission standards. Below is relevant information: 1. Final registration deadline for China 5 vehicles: The country has divided the "China 6 standard" into two phases, "China 6a" and "China 6b," with plans to implement them nationwide in 2020 and 2023, respectively. However, many regions have implemented the China 6 standard ahead of schedule. For example, starting from July 1, 2019, newly registered vehicles in Guangdong Province must comply with the China 6 emission standards. At that time, only new vehicles meeting the China 6 standard will be available on the market, and vehicles transferred from other regions must also comply with the China 6 standard. 2. Impact on registration: After the formal implementation of the China 6 standard, the main impact will be on the production, import, sale, and registration of new vehicles. Existing China 5 new vehicles will no longer be allowed to be registered, but previously registered China 5 vehicles can still be used, will not affect normal annual inspections, and can be traded as used vehicles.
3
2
Share

Can You Listen to Music When the Car Is Off?

No, it can cause the battery to drain and shorten its lifespan if done frequently. When the vehicle is turned off, continuing to listen to the radio or play music will typically only provide about 3 hours of power, even with a fully charged battery. Here are some important considerations before turning off your car: 1. Turn off the air conditioning system: When starting the vehicle, the air conditioning system automatically turns on, which can lead to an instant high power load. Over time, this can cause excessive wear on the battery. In winter, this is more likely to result in a drained battery and difficulty starting the car. 2. Turn off the cigarette lighter when the engine is off: The cigarette lighter operates using the car's power supply and is an important output interface. Many car owners connect various devices to this port for convenience and comfort, such as GPS, dash cams, or air purifiers. If the cigarette lighter remains powered when the engine is off, it not only drains the battery but also damages it over time. 3. Avoid prolonged power usage when the engine is off: When the car is turned off, the alternator stops working, and the battery operates in a "dry consumption" state without being recharged. This reduces its capacity and may prevent the car from starting. Excessive discharge can also severely damage the battery.
13
1
Share

What is the difference between SN and SL engine oil?

Engine oil SL and SN refer to the quality grades of engine oil. The most obvious difference between SN and SL oil is the grade difference, which also corresponds to variations in various performance aspects of the oil. Below are the differences between SN and SL engine oil: 1. Differences in oxidation resistance and anti-wear performance under high-temperature and high-speed operating conditions: For example, in the same TEOST MHT high-temperature deposit test: The SN standard requires no more than 35 milligrams; SN oil has higher high-temperature cleanliness than SL, making it particularly suitable for turbocharged engines. SN-grade oil offers better oxidation stability and anti-wear performance. Since SN oil contains lower levels of phosphorus and zinc compared to SL oil, it reduces wear on the three-way catalyst. 2. Different environmental protection levels of the oil: In the quality grades, the further the letter is in the alphabet, the higher the environmental protection level. Therefore, SL oil has a lower environmental protection level than SN, and the highest environmental protection level is SP-grade oil. 3. Classification by quality level: SG, SH, SJ, SL, SM, SN, so SN has a higher quality than SL. 4. Difference in availability: The number of SL-grade oils available for sale is fewer than SN.
6
4
Share

Is the passing score for C1 Subject 2 80 or 90?

The passing score for the C1 driver's license Subject 2 test is 80 points, with a full score of 100, so 80 points or above is considered passing. The C1 Subject 2 test consists of five main sections: reverse parking, parallel parking, curve driving, right-angle turns, and hill start and stop. For automatic transmission (C2) Subject 2, the hill start and stop section is not tested, and in some regions, there is an additional high-speed card retrieval task. A C1 driver's license permits driving small and micro passenger vehicles, among others. Subject 2 Test Introduction and Tips: During the Subject 2 test, before driving, always adjust the seat height and rearview mirrors to ensure a clear field of vision, and fasten your seatbelt. As long as the system does not announce a failure, do not stop during the test. Parallel Parking: Park the car into the designated space without crossing or touching the lines. Tips: Remember to find the correct angle, turn the steering wheel quickly, react promptly, and coordinate with the car's speed. Hill Start: Slowly drive up the hill and stop within the designated area. Tips: Remember to engage the handbrake, turn on the left turn signal when starting, release the handbrake, stabilize the clutch, and gently press the accelerator while releasing the clutch to avoid stalling or rolling back. Right-Angle Turn: Prepare to turn 90 degrees while driving straight, without crossing or touching the lines. Tips: Identify the reference point before turning and coordinate with the car's speed. Curve Driving (S-Turn): Slowly navigate the S-curve without crossing or touching the lines. Tips: Control your speed, drive slowly, and time the turns of the car's front end correctly. Reverse Parking: Reverse the car into the parking space without stalling or crossing/touching the lines. Tips: Control your speed, find the correct reference point, and make minor adjustments if the rearview mirror shows any deviation. C1 License Test Passing Standards: Traffic Laws and Related Knowledge—90 points to pass. Field Driving—80 points to pass. Road Driving—80 points to pass. Subject 2 Deduction Items: Reverse Parking: Vehicle body crosses the line—100-point deduction, failing the test; fails to enter the parking space—100-point deduction, failing the test; stops midway—5-point deduction per occurrence; fails to complete the test within the allotted time—100-point deduction, failing the test. Parallel Parking: After parking, vehicle body crosses the line—100-point deduction, failing the test; stops midway—5-point deduction per occurrence; tires or body touches the curb—10-point deduction; fails to complete the test within the allotted time—100-point deduction, failing the test. Curve Driving: Wheels cross the road edge line—failing the test; stops midway—failing the test; fails to use second gear or higher—5-point deduction. Right-Angle Turn: Wheels cross the road edge line—failing the test; stops midway—5-point deduction per occurrence. Hill Start and Stop: After stopping, the front bumper or motorcycle front axle is not aligned with the pole line, exceeding 50 cm—failing the test. Exceeds the allotted time for starting—failing the test. After stopping, the front bumper or motorcycle front axle is not aligned with the pole line but does not exceed 50 cm—10-point deduction. After stopping, the vehicle body is more than 30 cm but less than 50 cm from the road edge line—10-point deduction. Fails to engage the parking brake after stopping—10-point deduction.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.