What is the difference between standard wheelbase and long wheelbase?

1 Answers
StEden
07/30/25 6:23am
The main difference between long wheelbase and standard wheelbase lies in the increased wheelbase, longer body, larger interior space for more comfortable seating, and better driving stability. The BMW 3 Series long wheelbase is domestically produced in China, with an extended wheelbase tailored for the Chinese market, while the standard wheelbase is imported, offering smaller space but no significant technical differences. Below are the relevant details: 1. In terms of appearance, the new car's design remains unchanged, but the overseas new 4 Series' 18-inch 848M wheels will be equipped on the 325i M Sport model, while other M Night Shadow models offer them as optional. The vehicle interior also comes standard with Volcano Red Sensatec leather upholstery across the entire lineup. 2. Regarding configurations, the new car comes standard with cruise control and a rearview camera with parking assist function. Models other than the 320i/Li will feature standard keyless entry.
Was this review help?
13
3
Share
More Forum Discussions

Where is the fuel tank cap button on the Chevrolet Cruze?

The fuel tank cap of the Cruze is located on the right side, which is the passenger side. To open the fuel tank cap, first turn off the engine, then approach the fuel tank cap. Press the rear side of the fuel tank cap, facing the direction of the rear of the car, and press lightly. If it doesn't open, press a few more times. If the fuel tank cap is damaged, you can use the emergency manual switch located on the right side of the trunk to open it. Additional information: 1. Generally, the trunk and fuel tank cap of a sedan can be controlled remotely from inside the cabin, which provides great convenience to the owner. However, when they malfunction, it can often leave the owner at a loss, causing significant inconvenience. 2. If the fuel tank cap cannot be opened, you can start with the trunk. First, remove the trunk liner covering the fuel tank, which is usually secured by plastic clips and can be easily pried open with a screwdriver. After removing the liner, you can see the locking mechanism of the fuel tank cap and the remote control cable for the fuel tank cap. Simply pull the cable to open the fuel tank cap.
8
5
Share

Should the Sagitar 1.4T use 92 or 95 octane fuel?

The Sagitar 1.4T can use 92 octane fuel. This is the standard data provided by Volkswagen. Generally, vehicles with a "T" designation are recommended to use 95 octane gasoline to enhance the operational stability of the engine during operation. Since turbocharged engines require a high compression ratio, the proportion of fuel injected into the combustion chamber decreases. If lower-octane fuel with poor stability is used, it may cause abnormal engine operation. However, the Volkswagen Sagitar 1.4T engine, which uses the EA211 model, can efficiently utilize 92 octane gasoline, ensuring completely stable engine performance. Additional information: 1. Effects of using gasoline with too low an octane rating: If a high-compression engine uses low-octane fuel, it can lead to a sharp increase in cylinder temperature, incomplete fuel combustion, severe engine vibration, reduced power output, and damage to engine components. 2. Therefore, engines designed for 95 octane fuel should avoid using 92 octane gasoline. Conversely, using higher-octane fuel in a low-compression engine may result in "delayed ignition," where the fuel does not reach its auto-ignition point even at maximum compression, leading to incomplete combustion and carbon buildup, which is also detrimental to the engine. Hence, car owners must choose the appropriate gasoline according to their vehicle's engine specifications.
15
4
Share

How many seats does the BMW i3 have?

The BMW i3 is a four-seater, which is a pure electric vehicle under the BMW brand. The BMW i3 is a single-motor model, with the motor positioned at the rear, making it a rear-wheel-drive vehicle. Its motor has a maximum power of 125 kW and a maximum torque of 250 Nm. Here is a brief introduction to the BMW i3: 1. The BMW i3 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The multi-link independent suspension is a very common type of independent suspension that can improve the wheel's ground contact performance, thereby enhancing traction. With improved traction, the vehicle's handling also improves. 2. If you are interested in the BMW i3, you can visit a local BMW 4S store for a test drive. The driving experience of this car is also quite good. The interior space of the BMW i3 is also quite sufficient. The car's dimensions are 4020 mm in length, 1775 mm in width, 1600 mm in height, with a wheelbase of 2570 mm.
4
3
Share

How to Adjust the Time on Chery Fengyun 2?

To adjust the time on the Chery Fengyun 2, follow these steps: 1. Insert the car key into the ON position or start the vehicle, then locate a small black knob on the left side of the dashboard. 2. Rotate the knob to the right and hold it until you see the dashboard time start flashing. 3. Release the knob and then rotate it to the right in short increments to adjust the hours and minutes. Below is a brief introduction to the Chery Fengyun 2: 1. The Fengyun 2 features a revolutionary redesign with more fashionable and avant-garde elements. It is equipped with Chery's self-developed ACTECO 1.5L engine and meets the C-NCAP four-star safety standard. It integrates advanced technologies such as ABS+EBD, emergency locking seat belts, optional four airbags, and reinforced steel side impact beams. 2. The interior of the Fengyun 2 offers a bright, fresh, and minimalist feel. The self-illuminating dashboard with black background and white text ensures clear visibility of all readings day or night. The center console uses a soft-touch molding process typically found in mid-to-high-end vehicles. Two auxiliary meters on either side of the center console provide additional information: the left displays instant fuel consumption and light indicators, while the right shows interior/exterior temperature and clock functions, enhancing the information display capabilities.
17
3
Share

What to do if the fuel tank cap of Audi A6 cannot be opened?

If the fuel tank cap of Audi A6 cannot be opened, you can use the emergency release switch located in the trunk to open it. The emergency operation for the fuel tank cap is behind the right-side trim panel in the luggage compartment. To access it, unlock and pull open the trim panel, then pull the cord until you feel significant resistance, and press the fuel tank cap to open it. Additional Information: 1. The Audi A6 does not have a separate fuel tank cap switch; it is integrated with the central locking system. When the central locking is unlocked, the fuel tank cap switch will open, and you only need to press the fuel tank flap to open it. When the central locking is locked, the fuel tank cap switch will also be locked, and pressing it will not open. To remove the fuel filler cap, slowly turn it counterclockwise and hang it on the hook inside the fuel filler door. When reinstalling the fuel filler cap, turn it clockwise until you hear a click, ensuring that the cap is fully secured. 2. The fuel tank capacity of the Audi A6 is 75L, and the fuel filler is located on the right rear side of the vehicle. The recommended fuel grade for the vehicle is marked on the inside of the fuel tank flap. When refueling, avoid filling the tank to the brim to prevent fuel overflow due to thermal expansion and contraction.
5
5
Share

What is the principle of the brake light switch?

The principle of the brake light switch is that when the foot brake pedal is pressed, it pushes down on the brake light switch contact point, thereby closing the brake light circuit and illuminating the brake light. When the brake pedal is released, the switch contact opens, turning off the brake light. The brake light is installed at the rear of the vehicle and is primarily red in color to enhance the penetration of the light source. This makes it easier for following vehicles to detect when the vehicle ahead is braking under low visibility conditions, thereby helping to prevent rear-end collisions. The reasons why the brake light on the car dashboard stays lit continuously are: 1. Severe wear of the brake pads; 2. Insufficient brake fluid; 3. Damage to the brake switch.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.