What is the difference between single-core and dual-core car refrigerators?

Does 'F' Indicate Full or Empty Fuel Tank?

'F' indicates that the fuel tank is full. On the fuel gauge of a car's dashboard, the characters 'E' and 'F' are used. 'F' stands for full, while 'E' stands for empty. If the fuel gauge needle is at the 'F' position, it means the car's fuel tank is full. If the needle is at the 'E' position, it indicates that the fuel tank is nearly empty. When the car is low on fuel, a warning light will illuminate on the dashboard. The fuel warning light is usually shaped like a fuel tank. When fuel is low, the warning light will turn yellow; if the fuel is critically low, the light will turn red. Some car models only display a yellow fuel warning light, in which case the driver should pay attention to the remaining fuel level and refuel promptly. During refueling, it is not advisable to fill the car's fuel tank completely, especially in hot summer weather. This is because gasoline expands and evaporates into vapor under high temperatures in summer, and the resulting vapor or even liquid can enter the carbon canister for storage. Overfilling the tank can cause the fuel gauge needle to deviate. Even after prolonged use, the fuel gauge needle may not drop, but it will return to normal after some time. Effects of Low Fuel Level: Fuel sloshing leading to engine stalling: When the fuel level is too low, on bumpy or winding roads, the fuel may slosh, and the fuel pump may not be able to pump fuel in time. This can result in insufficient fuel supply, causing the car to experience shaking, jerking, or stalling. Fuel pump overheating: The fuel pump is cooled by the fuel. If the fuel level is too low, the cooling performance of the fuel pump will decrease, accelerating the wear of internal components and potentially leading to short circuits or burning out of the fuel pump. Clogging the fuel system: The bottom of the fuel tank contains more impurities. If the fuel level is too low, these impurities can enter the fuel supply system due to fuel sloshing, leading to clogged fuel lines. Impact on driving safety: Low fuel levels can easily cause the car to stall. If the car stalls while driving, both steering and braking can be affected. If there is heavy traffic on the road, this can easily lead to traffic accidents.

19

1

Share

How long a truck can a C1 license drive?

C1 license holders can drive light-duty trucks with a total length of 6 meters or less (including 6 meters), a maximum gross vehicle weight of 4,500 kg or less (including 4,500 kg), and a rated load capacity of 1,500 kg or less. Permitted vehicle types: The C1 driver's license allows driving small and mini passenger vehicles, light and mini cargo trucks, and light, small, and mini special-purpose vehicles. Small passenger vehicles must have a seating capacity of 9 or fewer people. C1 license holders cannot drive: large buses, tractor units, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, mopeds, wheeled self-propelled machinery, trolleybuses, or trams. Additionally, C1 license holders cannot drive vehicles with more than 9 seats or trucks with a total length exceeding 6 meters. What is a C1 driver's license: The C1 driver's license is one of the classifications of motor vehicle driving licenses. It permits driving small and mini passenger vehicles, light and mini cargo trucks, and light, small, and mini special-purpose vehicles. Small passenger vehicles must have a seating capacity of 9 or fewer people.

2

Share

How to match speed and gear for gear shifting in Subject 3?

Subject 3 gear shifting speed and gear matching are as follows: 1. When the speed is 0-10km/h, use 1st gear; 2. When the speed is 10-20km/h, use 2nd gear; 3. When the speed is 20-30km/h, use 3rd gear; 4. When the speed is 30-40km/h, use 4th gear. Additional information: The test content of Subject 3 includes: 1. Vehicle preparation, starting, straight-line driving, gear shifting operation, lane changing; 2. Driving straight through intersections, passing pedestrian crossings, passing bus stops, passing school zones; 3. Left turns at intersections, right turns at intersections, meeting vehicles, overtaking, U-turns, pulling over, and night driving.

9

0

Share

Can a C1 license holder reduce points through legal learning?

Any driver's license can be used to reduce points through legal learning, with no restrictions on the type of license or the permitted vehicle categories. According to Article 5 of the Notice on the "Work Regulations for Reducing Points for Road Traffic Violations through Accepting Traffic Safety Education (Trial)" issued by the Ministry of Public Security on January 14, 2020 (Gongjiao Guan [2020] No. 14), motor vehicle drivers who apply to participate in traffic safety education to reduce points for traffic violations should participate in corresponding road traffic safety laws, regulations, and related knowledge learning, examinations, or traffic safety public welfare activities according to their highest permitted vehicle category and meet relevant requirements to apply for point reduction. Point reduction through legal learning is a measure for drivers holding a driver's license who have been penalized with points for traffic violations. After participating in online traffic safety learning and passing the exam, their points can be reduced. This is a convenient traffic management measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Specific considerations are as follows: Applicable individuals: Motor vehicle drivers who hold a driver's license of the People's Republic of China, regardless of the permitted vehicle category or whether they are commercial vehicle drivers, can participate in point reduction through legal learning. They should participate in corresponding road traffic safety laws, regulations, and related knowledge learning and examinations according to their highest permitted vehicle category. Specific rules: Motor vehicle drivers participating in online road traffic laws, regulations, and related content learning must study continuously for 5 minutes each time, accumulate 30 minutes of study time within 3 days, and then register for an exam within 7 days. Passing the exam will reduce 1 point. Drivers can also attend on-site learning, with each session lasting no less than 1 hour. After completing the required study hours, they can apply for an exam. Passing the exam will reduce 2 points. Cases not accepted: The following situations will not be accepted: The driver had more than two full-point records in the previous scoring cycle. Within three cycles, the driver was involved in hit-and-run accidents, drunk driving, or used forged or altered documents or license plates. The motor vehicle driver's license is in the probation period or has not been reviewed after expiration. The motor vehicle driver has unprocessed traffic violation records under their name. The motor vehicle driver has a motor vehicle under their name with an expired safety technical inspection or not deregistered as required. The driver has already reduced the maximum of 6 points in the current cycle.

7

0

Share

What causes the ABS light to come on but then go away after restarting?

What causes the ABS light to come on but then go away after restarting may be due to front wheel slippage. Below are specific explanations for the reasons the ABS light comes on: 1. Front wheel slippage: For example, when driving on icy or snowy roads. Because the rotation conditions of the front and rear wheels are different, and the brake is applied at the same time, it is easy to cause a difference in braking between the front and rear wheels, and the ABS light will come on. In this case, pressing the brake a few more times will turn off the ABS light. 2. The sensor is covered by contaminants: The sensing part of the ABS speed sensor on the wheel is covered by mud, sludge, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This makes the ABS computer unable to determine the speed, unable to determine the wheel's slip rate, and thus unable to issue corresponding commands to adjust the braking.

16

4

Share

How to Repair Scratches on the Car Windshield?

Scratches on the car windshield can be removed by grinding. Here is a detailed introduction to repairing scratches on the car windshield: 1. Light scratches: Quickly handle them by polishing. Use a polishing wheel with polishing brightener to remove the oxidation layer attached to the car surface and smooth out fine scratches. At the same time, the chemical penetrates the paint to restore it, not only removing light scratches but also refreshing the paint surface. 2. Deep scratches: Perform local touch-up painting. Go to a paint repair center that offers quick scratch repair services and use specialized touch-up paint. The touch-up paint dries quickly, and the color can naturally blend with the original car paint without any color difference, leaving no trace of repair.

8

1

Share

What is the difference between single-core and dual-core car refrigerators?

Does 'F' Indicate Full or Empty Fuel Tank?

How long a truck can a C1 license drive?

How to match speed and gear for gear shifting in Subject 3?

Can a C1 license holder reduce points through legal learning?

What causes the ABS light to come on but then go away after restarting?

How to Repair Scratches on the Car Windshield?

What should I do if the car doesn't stall after driving through water?

What are the reasons for difficulty in starting the engine after hot shutdown?

Which department should I go to for a lost driver's license?

What kind of cars can be purchased with a C5 driver's license?