What is the difference between second-generation and fourth-generation car films?

Is the Civic equipped with independent suspension?

The Civic is equipped with independent suspension. Here are the relevant details: 1. The front suspension of the Civic uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. Independent suspension refers to a suspension system where there is no connection between the wheels on either side. It serves as both a force-transmitting component connecting the frame and the axle, and an essential part ensuring driving safety. 2. The Civic is a compact car under Dongfeng Honda, with dimensions of 4649mm in length, 1800mm in width, and 1416mm in height, and a wheelbase of 2700mm. The car's tires use more environmentally friendly rubber materials, incorporating silicon particles that help reduce tire heat during driving, and feature special tread patterns to enhance drainage performance.

4

2

Share

What are the reasons why the hood cannot be closed?

The hood may not close properly due to the release lever inside the cabin being stuck and not returning to its original position, or it could be caused by rust or debris stuck in the locking mechanism. Applying some rust remover or lubricant to the moving parts of the lock mechanism can help. The functions of a car hood are as follows: Airflow Guidance: For objects moving at high speeds through air, the air resistance and turbulence generated around the object can directly affect its trajectory and speed. The shape of the hood can effectively adjust the direction of airflow relative to the car's movement and the resulting resistance, reducing the impact of airflow on the vehicle. Protection for the Engine and Surrounding Components: Under the hood lie critical components of the car, including the engine, electrical circuits, fuel system, braking system, and transmission system. By enhancing the strength and construction of the hood, it can effectively guard against adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle operates normally. Assisting Driver Visibility: While driving, the driver's forward visibility and the reflection of natural light are crucial for accurately judging road conditions and what lies ahead. The shape of the hood can effectively adjust the direction and form of reflected light, thereby minimizing its impact on the driver. Preventing Accidents: The engine operates in a high-temperature, high-pressure, and flammable environment, where there is a risk of explosions, fires, or leaks due to overheating or accidental damage to components. The hood can effectively block injuries caused by explosions, acting as a protective shield. It also helps to isolate air and prevent the spread of flames, reducing the risk and extent of fire damage.

1

2

Share

Can Correction Fluid Be Used to Repair Car Paint?

Correction fluid cannot be used as a substitute for paint to repair car paint scratches. Here is relevant information about using correction fluid for car paint repair: Reasons why correction fluid cannot replace paint for repairing car paint scratches: Because correction fluid tends to peel off more easily after drying, and it also softens and falls off when exposed to water, making it completely ineffective on rainy days. Additionally, the metal tip of correction fluid is very sharp, and using it to touch up paint may scratch the car body, which is not worth the damage. The best method is to go to a 4S shop for paint repair. Treatment methods: Minor scratches on the paint surface usually only affect the top layer of the paint and are not very deep. These can be completely repaired by waxing without leaving any noticeable marks. The cost of waxing is not very high, and if you have a good relationship with the repair shop staff, they might even handle minor damages for free. If the scratches are deeper, with some of the top paint scraped off but without damaging the primer or causing serious deformation, waxing can still effectively restore the paint surface.

12

5

Share

How to Remove Adhesive Strips from a Car?

Methods for removing adhesive strips from a car are as follows: 1. Use a paper towel soaked in alcohol—preferably industrial alcohol, though medical alcohol will also work—to wipe the area, and it will clean off after a few rubs. 2. Use acetone, following the same method as above. It requires less quantity and removes the adhesive residue more thoroughly and quickly than alcohol. Both of these are solvents and are the most effective methods. 3. Use nail polish remover, applying it similarly to alcohol or acetone. The quality of the nail polish remover doesn’t matter; as long as it can remove nail polish, it will work. 4. Use hand cream. First, peel off the surface layer of the adhesive, then squeeze some hand cream onto the residue and slowly rub it with your thumb. After a while, the adhesive will come off, though this method is slower. Hand cream is an oily substance, and its properties are incompatible with adhesives, which is why it works. 5. Use banana oil, an industrial solvent used for removing paint, which is also easy to purchase at paint stores. Apply it the same way as alcohol or acetone.

12

4

Share

Should the exhaust valve be tightened?

It is better to tighten the automatic exhaust valve on the car. Here is some knowledge about the exhaust valve: About the exhaust valve: It is better to tighten the automatic exhaust valve on the car, generally more than two turns. After the automatic exhaust valve device is installed, the nut must be loosened to exhaust, but do not unscrew it completely. When gas escapes in the system, the gas will rise along the pipeline and eventually gather at the highest point of the system. The automatic exhaust valve is usually installed at the highest point of the system. When gas enters the exhaust valve chamber and gathers in the upper part of the exhaust valve, as the gas inside the valve increases, the pressure rises. When the gas pressure exceeds the system pressure, the gas will cause the water level in the chamber to drop, and the float will descend with the water level, opening the exhaust port. After the gas is completely discharged, the water level rises, and the float also rises, closing the exhaust port. Similarly, when negative pressure is generated in the system, the water level in the valve chamber drops.

5

2

Share

What are the national standard acceptance criteria for overhead cranes?

Overhead crane national standard acceptance criteria are as follows: Overhead crane stairs, walkways, and operator cab standards: Items in the operation room should be placed according to fixed-position requirements; equipment should be intact and tidy, with various electrical wires bundled neatly and aesthetically. Walls should be clean, and ceilings should be free of dust accumulation. The floor inside and outside the operation room should be kept clean, free of paper scraps, cigarette butts, or debris. Windows should be clean, and lighting fixtures should be dust-free; lighting facilities should be intact and tidy, with posted or hanging items harmoniously unified with their surroundings. Overhead crane stairs and walkway floors should be level, free of garbage, cigarette butts, paper scraps, or spittle, kept clean and unobstructed; stair handrails and steps should be dust-free and free of oil stains. Overhead crane mechanical beam 6S operation standards: Mechanical doors should not be locked; floors and related facilities should be kept clean and dust-free on the surface, with daily inspections conducted and recorded in the . Hazardous areas should have "Special Warning Signs" and warning lines marked on the floor to prevent others from approaching. Each area should have demarcation lines and , with standardized fonts and clean surfaces. Various items placed within the demarcation lines should be neatly arranged and must not exceed (or press against) the lines.

18

2

Share

What is the difference between second-generation and fourth-generation car films?

Is the Civic equipped with independent suspension?

What are the reasons why the hood cannot be closed?

Can Correction Fluid Be Used to Repair Car Paint?

How to Remove Adhesive Strips from a Car?

Should the exhaust valve be tightened?

What are the national standard acceptance criteria for overhead cranes?

What Causes Jerking During Acceleration After Gear Shifting?

Is it normal to hear a clicking sound when shifting to P gear?

What Causes Carbon Buildup on Motorcycle Valves?

How to Change the Transmission Oil for Cruze?