What is the difference between replacing brake pads at a 4S store and outside?

1 Answers
Madelyn
07/29/25 12:12am
The main difference between replacing brake pads at a 4S store and outside lies in the price and quality. The differences between replacing brake pads at a 4S store and outside are as follows: Price: Generally, the cost of replacing parts at a 4S store is much higher than replacing them outside. The cost of replacing parts or repairing a car outside is usually one-third of that at a 4S store. Quality: The quality of brake pads replaced at a 4S store is guaranteed, and warranty services are provided. The quality of brake pads replaced outside varies, and some unscrupulous vendors may pass off inferior products as high-quality ones, leading to quality issues after replacement and potential safety hazards. Generally, for safety components and core car parts like brake pads, airbags, transmissions, and engines, it is best to have them replaced and repaired at a 4S store. Although the cost at a 4S store may be higher, it ensures safety and quality.
Was this review help?
14
3
Share
More Forum Discussions

What Are the Reasons for Frequently High Car Coolant Temperature?

"The reasons for the car coolant temperature always showing high include insufficient coolant, faulty radiator fan, and faulty circulation water pump. Insufficient Coolant: Coolant leakage or low coolant levels can cause the engine temperature to rise. In this case, the coolant level should be checked. If it is low, first top it up to the appropriate level, then check again after a few days to see if the level has dropped significantly. If it has, locate the leak and repair it. Since the coolant reservoir has many small tubes, if the coolant leakage is due to loose connections, you can wrap the damaged tube with a rope or plastic bag. If it's just a matter of low coolant, simply add more coolant. Note that you should wait for the coolant temperature to drop before adding more. In an emergency, clean water can be used as a temporary substitute. However, it's important to note that clean water should only be used as a stopgap measure. Once the temperature returns to normal, new coolant should be replaced as soon as possible. Faulty Radiator Fan: If the radiator fan is faulty, the heat generated during high-speed operation cannot be effectively transferred to the coolant, affecting heat dissipation. This can lead to an increase in coolant temperature, causing issues like boiling. Immediate repair is necessary. Faulty Circulation Water Pump: Water pump issues can include seized bearings or damaged impellers. Seized bearings are relatively rare, while damaged impellers are more common, such as cracked impellers or impellers loosening from the pump shaft. This slows down the circulation of coolant, leading to engine overheating. Prompt repair is required."
17
4
Share

How to Use the Seat Ventilation in Volkswagen CC?

For the older CC models, there is a switch with a fan symbol under the seat. Press this switch to activate the seat ventilation function. In the newer CC models, the seat ventilation is integrated with the air conditioning system. Simply turn on the air conditioning, and the seat ventilation will automatically activate. Seat Ventilation: Seat ventilation refers to the process where, with the air conditioning on, fans blow air into the seat, which then escapes through small holes on the seat surface to achieve ventilation. This helps improve air circulation between the body and the seat contact areas, enhancing comfort during rides.
13
2
Share

How Long Can a Car Drive Continuously?

"Under normal vehicle conditions, the maximum driving distance of a car is influenced by the fuel tank capacity and fuel consumption. Therefore, if fuel consumption and fuel quantity are not considered, the car can theoretically keep driving indefinitely—until the driver feels fatigued, which would then be the maximum driving distance. For a car with all indicators functioning normally, prolonged driving generally doesn't cause significant issues. However, it's important to avoid problems such as engine overheating, tire wear, and brake heat fade. If these issues occur, they can cause substantial damage to the car and, in severe cases, even compromise driving safety. Engine overheating. If this happens on a regular road, promptly reduce speed, park the car in a relatively cool area like under shade, let the engine idle, and open the hood for ventilation and cooling until the engine temperature returns to normal. However, if engine overheating occurs during high-speed driving or uphill climbs, and the temperature gauge needle enters the red zone, remains high, or fluctuates repeatedly, immediate action must be taken. If not addressed promptly, once white smoke emerges from under the hood, the only option is to pull over. Engine overheating is extremely hazardous and can damage engine performance, so extra caution is necessary. Tire overheating. Low tire pressure, braking, or friction between the tire and the car body can lead to tire overheating. If this occurs, continuing to drive should be avoided to prevent a blowout. Pouring cold water on overheated tires is also not advisable, as sudden thermal contraction may cause tire damage. Therefore, it's best to let the tires cool down naturally."
1
1
Share

How many years after applying for a motor vehicle license plate can it be canceled and reapplied for?

"A vehicle applying for cancellation of registration must have been under the owner's name for more than three years before its motor vehicle license plate can be canceled. Motor vehicle license plates cannot be replaced, but the original plate can be canceled, and a new plate can be applied for. After the motor vehicle registration is completed, the motor vehicle license plate must be used on the vehicle. If the license plate number is unsatisfactory, it cannot be changed at will. Vehicle license plates are standardized in format and style as stipulated by national vehicle management regulations. They are hard-numbered plates with registration codes issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that have applied for plates. Once a license plate number is determined, it cannot be changed at will. Only when a motor vehicle undergoes transfer, archival change, or scrapping is it allowed to change the license plate. Other circumstances do not permit changes. Motor vehicle license plates cannot be replaced, but the original plate can be canceled, and a new plate can be applied for. To cancel a vehicle license plate, the vehicle's driving license must be taken to the traffic police department to apply. The vehicle applying for cancellation of registration must have been under the owner's name for more than three years. Only then can the motor vehicle license plate be canceled. The owner must bring their driving license, original and photocopy of ID card to the vehicle management office to fill out the motor vehicle license plate replacement application form, submit the original license plate, and pay the processing fee. According to regulations, the procedure for replacing a license plate is generally completed within one working day. Once a vehicle license plate is canceled, it cannot be retrieved, and a new vehicle license plate must be obtained."
3
3
Share

How to Turn on the Fog Lights in an Audi?

The method for turning on the headlights and fog lights is the same across all Audi models. Taking the domestic Audi A4L as an example, the switch is located below the air vent on the driver's side. The middle knob controls the parking lights and low-beam headlights, while the two buttons on the left side (one above the other) are for the front and rear fog lights—simply press them to activate. The right side controls the interior lights and instrument panel brightness adjustment. The purpose of fog lights is to make the vehicle visible to others in conditions of reduced visibility, such as fog or heavy rain. Therefore, fog lights require a light source with strong penetration. Most vehicles use halogen fog lights, while higher-end models may feature LED fog lights. Fog lights must be installed below the bumper, as close to the ground as possible, to ensure their effectiveness. If mounted too high, the light cannot penetrate the fog or rain to illuminate the road (since fog is usually thinner below 1 meter), which can be dangerous. Typically, the fog light switch has three positions: position 0 turns them off, position 1 controls the front fog lights, and position 2 controls the rear fog lights. When set to position 1, only the front fog lights are active; at position 2, both front and rear fog lights work together. Therefore, when using fog lights, it's important to know which position the switch is in to ensure convenience for yourself and safety for others on the road.
8
5
Share

What is the appropriate tire pressure for inflation?

Tire pressure should be set according to the manufacturer's recommended value (which varies by vehicle), and is not necessarily related to the brand of tire used. 1. Standard tire pressure can usually be found in the following places: the vehicle user manual, the label near the driver's door (B-pillar), the drawer next to the driver's seat, or the fuel tank cap door. 2. Recommended tire pressure values: Due to different weight distributions of the vehicle body, the recommended tire pressure for front tires, rear tires, empty load, and full load will vary. Special attention is needed during tire rotation, as adjustments should be made promptly based on the position of the tires.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.